2011 Shimano XTR – Actual Weights for Full Component Group

2011-shimano-xtr-component-weights-cassette

I posted a couple of items’ weights the other day, but here’s the whole enchilada. All 2011 XTR components weighed individually.  I haven’t added it all up, but Shimano’s folk said the entire group comes in about 70g heavier than SRAM’s XX, mainly due to the cassette (above). This weight compares just parts available from both groups, but XTR also has pedal and wheels in the group, and when you add all of those up, the new group is substantially lighter than the prior 9700 series XTR.

Shown above is the 11-34 cassette at 254g. There’s also an 11-36, and the unofficial word is that there’ll be a 32T version offered in the future. Without further ado, jump on past the break to see the real weights of every piece…

2011-shimano-xtr-component-weights-wheel-race-f

Two wheelsets are available, Race and Trail, which follows in the motif of the new XTR. A full breakdown of the differences in the parts and technologies will be done separately. Shown above is the Race Front with 15mm thru axle: 690g.

2011-shimano-xtr-component-weights-wheel-race-r

XTR Race Rear Wheel w/ standard 9mm QR: 817g

2011-shimano-xtr-component-weights-wheel-trail-f

XTR Trail Front 15mm thru axle: 771g

2011-shimano-xtr-component-weights-wheel-trail-r

XTR Trail Rear Wheel w/ standard 9mm QR: 917g

2011-shimano-xtr-component-weights-skewer

Rear QR skewer: 65g

2011-shimano-xtr-component-weights-trail-brake-r

XTR Trail Brake (rear): 253g (front Trail brake was not available for weighing individually)

2011-shimano-xtr-component-weights-race-brake-f

XTR Race Front Brake: 220g (they’re actually a few grams lighter if you remove the spacer)

2011-shimano-xtr-component-weights-race-brake-r

XTR Race Rear Brake: 237g

2011-shimano-xtr-component-weights-rotor-160

160mm Ice Tech rotor: 106g

2011-shimano-xtr-component-weights-brake-pad-resin-fin-1

Resin Trail Brake Pad w/ cooling fins: 11g each

2011-shimano-xtr-component-weights-brake-pad-metallic-fin

Sintered Metallic Brake Pad w/ cooling fins: 16g each

2011-shimano-xtr-component-weights-brake-pad-metallic

Sintered Metallic Race Brake Pad: 5g each

2011-shimano-xtr-component-weights-r-shifter

XTR Rear Shifter Pod w/ cable: 117g

2011-shimano-xtr-component-weights-f-shifter

XTR Front Shifter w/ cable: 107g

2011-shimano-xtr-component-weights-pt1-011

XTR Rear Derailleur: 174g

2011-shimano-xtr-component-weights-pt1-031

XTR Front Direct Mount Derailleur: 132g (there are an abundance of front d’s in the new XTR group, this is the only one they had sitting around to weigh)

2011-shimano-xtr-component-weights-pt1-021

XTR Race Double 42/30T Crankset: 634g (there’s also a 40/28 and 38/26 available, and the triple, but those weren’t available to weigh. We have the triple and the bottom bracket on our bike now, but it’ll be a bit before we have the chance to pull them off and weigh them separately. A 44T big ring for the doubles will be available at the pro level, but otherwise they keep a 12T difference between the two rings)

2011-shimano-xtr-component-weights-pedal-race

XTR Race Pedal: 153g each (306g/pair, with a bit of dusty dirt)

2011-shimano-xtr-component-weights-pedal-trail

XTR Trail Pedal: 188g each (376g/pair, also with a bity of dusty dirt)

To check the claimed weights, take a peep at our original post about the new XTR component group.

Comments

[...] 2011 Shimano XTR – Actual Weights for Full Component Group [...]

[...] Complete 2011 XTR Group component weights [...]

KGr - 12/23/10 - 9:14pm

Here’s a cross-reference link to the Dynasys XT weights:

http://www.bikerumor.com/2010/05/25/shimano-xt-3×10-dynasys-unboxed-and-weighed/

Post a comment:

Comment sections can be a beautiful source of knowledge, conversation and comedy. They can also get pretty ugly, which is why we've updated our Comments Policy. If your comment isn't showing up or suddenly disappears, you might want to check it out.