Home > Bike Types > Cyclocross

Van Dessel’s Full Tilt Boogie Carbon Cyclocross Bike Formally Introduced

1 Comment
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

van-dessel-full-tilt-boogie-carbon-cyclocross-bike

We showed you this grainy blueprint spy shot back in April, at which time Van Dessel promised real photos would be forthcoming shortly. Well, they’ve gone and made an “official” announcement and introduction, but guess what? Still just grainy pics that we had to digitally enlarge…and they’re mockups, at that. So, lots of words, few pics. Here ya go:

PRESS RELEASE: Two years of development resulted today in the introduction of Van Dessel Cycles’ full-carbon cyclocross race bike, called the “Full Tilt Boogie.” The bike takes its design cues from Van Dessel’s veteran Gin & Trombones ‘cross bike and, for the carbon fiber skeptics that lurk among us, the Full Tilt Boogie even has some built in “insurance” when it comes to crashes.

“The Full Tilt Boogie is an absolute pure race bike with no compromises and everything 100 percent focused on going as fast as possible,” remarked Edwin Bull, founder and president of Van Dessel.

Defined as a pure cyclocross RACE bike, everything is designed toward being fast on race day, including omission of water bottle cage bosses. The bike features a BB30 bottom bracket shell and 1.5″ tapered headtube, which go a long way in maximizing frame efficiency and control. While designed to be a very efficient and responsive frame, the tube diameters are reduced (in comparison to Van Dessel’s Rivet, for example) to give the frame a little more compliance over rough terrain. Exact frame weight is still to be determined based on final production details, but it will be within the 1150 to 1250-gram range.

Aside from making sure the bike performs when the start whistle blows, racers know that in ‘cross, accidents do happen, which is why the top tube has a heavily reinforced center section where bars can hit. A reduced wall diameter allows for increased wall thickness and, given that carbon’s known “Achilles-heel” is its diminished strength against impact, and the fact that crashes happen, Van Dessel will be offering a generous no-fault crash-replacement policy.

Midway through last season, racer and lightning bolt industry influencer, Adam Myerson (pictured), modified his Gin & Trombones cable routing with power tools so that the housing runs from the top tube all the way to the rear derailleur. The motive was to keep the rear derailleur free of grit, water, sand, and mud while maintaining smooth shifting. Van Dessel’s other elite guys followed suit and now “Myersonian routing” is stock on all of Van Dessel’s new ‘cross frames.

“I’m getting way too much credit since this is a trick mountain bike racers were using 20 years ago,” remarked Myerson. “I just had the power of the Internet to document the modification. What I did see though, was people spending a lot of money for sealed cable systems that didn’t seem to me to work any better or last any longer than more affordable ones. Get rid of the split cables and you get rid of places for contamination, with a more working-class approach. I think that matches well with the workhorse mentality of Van Dessel bikes in general.”

On the athlete front, Myerson has re-signed with Van Dessel. He will be joined by Bill Elliston (Elite/35+), Gui Nelessen (Elite), Fred Wittwer (Masters), Mark Kutney (Masters) and multi national ‘cross champ, Jeff Bahnson (Junior), who will be heading up the Van Dessel Factory Team this season for a full tour of the US Gran Prix races, nationals, as well as every regional race they can enter.

The Full Tilt Boogie will be available mid August and will come in five sizes: 50, 52, 54, 56, and 58 cm. The bikes will be spec’d with matching custom “Flanders yellow” TRP EuroX brakes, and all complete bikes will be outfitted with Vittoria XM tubulars. All bikes are available in any and all component groups from SRAM, Shimano, and Campagnolo. While we regret that we won’t yet offer the Full Tilt Boogie in 60cm size, the Gin & Trombones has always been offered in a 60cm version.

SPECS:

Full Tilt Boogie:
– Frameset = $1999
– Complete w/ Rival = $3599*
– Complete bikes available with SRAM, Shimano, or Campagnolo builds.
– ETA = August 15

Gin & Trombones:
– Frameset = $1149
– Complete w/ Rival = $2799*
– Complete bikes available with SRAM, Shimano, or Campagnolo builds.
– ETA = Early August

*Rival bike spec is as follows:
Rival shifters, front derailleur, rear derailleur, PC-1030 chain, OG-1070 cassette, TRP EuroX brakes, FSA Gossamer BB30 CX 36tx46t cranks, OS190 stem, Omega handlebar, SL280 post, VDC saddle, Sun Ringle Vista Cruiser 28/32h CX tubular wheels, Vittoria XM tubulars.

All Van Dessel complete bikes are always built to order, which means customers can choose stem length, bar width, crank length, cassette gearing, and bar tape color…always.

A $400 “performance upgrade” package upgrades stem, bar, and cranks on the above builds to FSA OS99, FSA Energy, Force BB30.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.