Home > Other Fun Stuff > Actual Weights

Farr builds a better endurance MTB barr, gets a grip on U.S. distribution

32 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

It may seem like mountain biking is all about enduro and gravity these days, but there is still a growing endurance segment. Events like the Absa Cape Epic are more popular than ever as riders push themselves to find their own physical and mental limits. Naturally, a relatively new company out of South Africa is focusing specifically on endurance inspired bike solutions. Solutions like their Farr Barr.

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution Farr builds a better endurance MTB barr, getting a grip on U.S. distribution Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

From certain angles, the Farr Barr looks fairly radical, but its design makes a lot of sense. We’ve seen everything from special grips, to inner bar ends, to full on aero bars in an attempt to give endurance mountain bikers additional hand positions for grueling endurance events. Rather than adding additional weight and complexity to riders’ setups, Farr builds an additional hand position into the bar itself.

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

Starting with a 720mm wide full carbon handlebar, the Farr Barr builds in a “wing” on either side of the stem. These wings are the perfect shape to support your palm and form a very comfortable hand position that is probably more aerodynamic as well.

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

From straight on, the wings disappear into the silhouette of the bar to keep things streamlined. Farr lists the bars as having a 9° rearward sweep, but they also have a noticeable upward component as well.

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

When mounted, the barrs look pretty normal from the front…

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

Yet a little wild from the top. Most importantly though, they seem to be very comfortable and ideal for their intended purpose.

Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

On the scale, even with the wings the bars come in at a respectable 168g – only one gram off of claimed. Farr builds a better endurance MTB barr, getting a grip on U.S. distribution

U.S. Pricing and availability

Since these are geared towards the XC market, even the minimal 720mm width may be too wide for some so the bars are cuttable and include hash marks for cutting guides. Until now, the Farr Barrs and other components haven’t been available in the U.S. Moving forward they’ll be imported by the same folks behind Spēd Precision Wheels, where the bars will sell for $154.95. Email info@spedprecision.com to order or get more info for now until the Farr U.S. website is up and running.

UPDATE: updated with a preorderThe Sped Precision website has been for the bars with expected delivery of mid-February.

ridefarr.com

spedprecision.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

32 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Collin S
Collin S
6 years ago

As a single speeder/XC rider, these would be pretty nice. I spend a lot of time in that position.

Adin Maynard
Adin Maynard
6 years ago

Great idea but 720mm? Are they not listening? 740mm minimum for the xc crowd and some can cut down. 760mm even better

CHRISTOPHER G LYNCH
CHRISTOPHER G LYNCH
6 years ago
Reply to  Adin Maynard

exactly. They should start at 760 and or even 780 and let people cut them down to fit their needs. You can do the opposite and add length. I might not be an endurance rider but I find that hand position very useful.

Sevo
Sevo
6 years ago

Why didn’t someone think of this sooner? This is brilliant!

Ck
Ck
6 years ago

Meh, if someone were really going for the “XC aero” position, Fox/Rockshox would build hand grips into the crowns of their XC forks.

All kidding aside, I may actually buy this bar, because I regularly use this hand position traversing roads between trails.

Padrote
Padrote
6 years ago
Reply to  Ck

Meh

blah blah blah
blah blah blah
6 years ago
Reply to  Padrote

meh meh

Moohah
Moohah
6 years ago
Reply to  blah blah blah

meh meh mehmeeeeeh

wes
wes
6 years ago
Reply to  Ck

hmm meh

Heffe
Heffe
6 years ago

These look pretty cool. For endurance rides I’ve even tried putting extenders on the end of the bar.

fred
fred
6 years ago

Great idea and looks sweet. The length is fine for xc.

Bill
Bill
6 years ago

Just attach some bmx foot-pegs to your fork and use them to steer the bike. I do like the idea of this fork but is there’s a shaped grip that I can add to my existing bars?

bsimon1970
bsimon1970
6 years ago
Reply to  Bill

I wonder if you could slide an ergon grip up there?

FFM
FFM
6 years ago
Reply to  bsimon1970

Thought the same thing then looked around and saw that pretty much every MTB bar tapers pretty gradually from the stem clamp diameter to the grip diameter and definitely not at the same rate across models. That makes a one-size-fits-all solution difficult and rules out just sliding a grip up there unless you use a non-locking ergo (useless) or an ESI-type slide on, at which point you might as well use bar tape. As much as I like to nit pick new stuff, this frankly looks awesome.

Nefty1
Nefty1
6 years ago

It’s about time! Amazing that it took this long for a carbon flat bat with inner hand positions. It’s a little narrow but definitely a step in the right direction.

terp
terp
6 years ago

well… I, being me, likes this. Also, I think its nice. Thank you

i
i
6 years ago

I, for one, would rather have a bar that was too wide than too narrow. I’m also old enough to remember when 600mm was absurdly wide and everyone thought you’d snag the ends on trees.

Otherwise pretty cool idea. If it wasn’t for the width, I’d consider getting one. Not least of which because the logo looks like it says “fart” and stuff like that can be really funny near the end of long rides.

Antipodean G
6 years ago

This is very much a head slap ‘duh!’ moment. Good stuff!

Tomi
Tomi
6 years ago

Bike Industry : what we want are new lightweight cinelli spinacci like extensions with 31.8mm mounts. I sometimes use that position in marathon races but without being able to extend a bit your arms such a position isn’t really comfortable in the long run.

Bazz
Bazz
6 years ago
Reply to  Tomi

Get some of those larger bar ends, mount them inboard and you are good to go. I used a very cheap set for the 2017 marathon season at elite level. Worked very well, some officials looked over their clip boards at my bike but no one said anything – some people laughed but I dropped most of them most races on the first fast section of single track…

Tomi
Tomi
6 years ago
Reply to  Bazz

Looks like my bar is tapering quite soon I have thumbies mounted right after the brake levers. I’ve considered a Deda Blast for the long climbs of the Grand Raid.

Ed
Ed
6 years ago

My lungs [don’t] work full capacity in this position.

Nate
Nate
6 years ago

Great idea and implementation, I think I will be adding these eventually.

Tom
Tom
6 years ago

Great idea. Makes me realize how much I miss my old school, funky looking, amazingly functional bar ends!

Crash Bandicoot
Crash Bandicoot
6 years ago

Cool idea would actually be nice to go into the supertuck descent mode with this set up (obviously only on pavement or very smooth gravel roads) sometimes on my rest days I’ll take my hard tail (which is set up for technical riding) for some urban MTB and I hate spinning out the 30 on descents.

Brendan
Brendan
6 years ago

Neat! On my road bike I’ve sometimes adopted a “virtual aerobar” position, just resting my forearms on the bar tops. You could possibly do the same with these flat bars.

Frank
Frank
6 years ago

Agreed: make the next revision a bit wider and put the hand test position a bit further out so there’s more room for my lights, computer, etc., and I am sold!

okka
okka
6 years ago

Interesting. Aimed at racing? So how do you hold on with a number plate smack bang in the same spot? Hrm.

Giles Bryer
Giles Bryer
6 years ago

Cool bars. Anyone know what fork are they running? – the P650b ran a straight steerer in those colors which has been a somewhat vexing attribute of an otherwise great bike.

iperov
iperov
6 years ago

look like boobs

King County
King County
6 years ago

Trek had a ‘bar with a similar idea, except the additional hand spot extended,.. sort of like bar ends if they were mounted inside of the brake levers/shifters. https://colonialbicycle.com/product/bontrager-satellite-elite-carbon-trekking-handlebar-50935-1.htm

Michael Clayton (@CreekerMike)

“the minimal 720mm width may be too wide for some” Whah!? Uh, no. Good concept but poor execution. Shoulda gone with at least 760mm with cutdown marks.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.