Home > Bike Types > Mountain Bike

Found: SD Components Dynamic Volume Chamber upgrade for Fox, Rockshox forks

SD Components upgrade kit lets you fine tune your Rockshox Pike and Fox 36 air volume for better performance
4 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Based in Australia, SD Components makes fork upgrade kits for the Fox 36 and Rockshox Pike, Lyrik and Boxxer mountain bike suspension forks. The main item is their Dynamic Volume Chamber, which gives you two separately adjustable air chambers. This creates a dual system that works together to provide both end-of-stroke support and small bump sensitivity at the beginning of travel…which is the holy grail we all seek.

There’s two camps forming when it comes to the best way to adjust your fork’s sensitivity and overall tune. One the one hand, Fox and Rockshox offer volume spacers that let you tweak the overall volume, then adjust air pressure to suit your weight and riding style. More spacers can provide more ramp at the end to prevent bottom out, but end up requiring higher air pressure to support the rider, which decreases small bump suppleness. Read this tech post to see how that works and how to adjust your own fork.

The other camp is being formed by MRP and, now, SD Components. MRP launched their Ramp Control Cartridges at Eurobike 2016, and they work by proving a dynamic air volume adjustment through porting that closes off the upper half of the air chamber on a big hit to control ramp and prevent bottom out. We posted a deep dive on that tech here.

SD Components upgrade kit lets you fine tune your Rockshox Pike and Fox 36 air volume for better performance

SD Components takes a different approach by creating two completely sealed air chambers, each with it’s own air pressure setting (similar to the new Formula Nero R DH fork’s triple air design). Designed for modern “solo air” forks that self adjust pressure between the positive and negative chambers, the Dynamic Volume Chamber simply threads into the top of the air chamber of either brand’s fork. It replaces the standard air cap and volume spacer system with a secondary, higher pressure chamber.

SD Components Dynamic Volume Chamber gives you a dual positive air chamber upgrade for fine tuning mountain bike fork performance

At full extension, you set the main chamber at a lower pressure to improve small bump sensitivity and mid-stroke performance. The upper (new, secondary) positive air chamber is set at a higher pressure, and has a floating piston separating the two chambers. As the fork compresses, air pressure in the main chamber will rise to match the secondary chamber. At this point, both chambers compress in sync:

SD Components Dynamic Volume Chamber gives you a dual positive air chamber upgrade for fine tuning mountain bike fork performance

Because the main chamber is larger and set at a lower starting pressure, it can react more quickly to small hits and subtle trail fluctuations. The smaller, high pressure chamber doesn’t move until system pressure is equalized between them, which then controls the end of stroke movement and ramp. And either chamber can be used either way – increase the main chamber pressure to increase beginning and mid stroke support, or increase secondary chamber to make it more progressive. The key is that it offers a lot of flexibility in fine tuning your fork’s performance to match your needs. Retail is AU$260, check their website for all compatible models.

SDComponents.com.au

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Luiggi
Luiggi
6 years ago

You’re kinda leaving the pioneers of dual-air progressive Chambers here (Manitou). Their IRT system is the first stock option for forks.

Hissijono
Hissijono
6 years ago

So in other words this system is actually opposite of the likes of MRP. On MRP, system volume temporarely decreases upon impact and creates more progressive spring curve resisting bottoming. On this, when main chamber pressure reaches DV-chamber pressure (and from then on both chambers’ pressures being equal) system volume increases and spring curve becomes less progressive.

Main adjustment with this system is then the difference of pressure of main- and DV-chamber, which determines at which point in travel total system volume is increased (eg. really small pressure difference -> DV-chamber will kick in sooner, and total fork action is closest to fully stock one / really big difference -> DV-chamber kicks in very late, and total fork action is closest of running solid tokens of equal volume of the whole DV-chamber). With main chamber being smaller than on a fully stock fork, pressure on that chamber to achieve identical fork sag compared to stock can be maybe a tad lower, achieving a bit lower initial force required to start suspension action compared to stock, but on the other hand increasing system stickiness regards to IFP after the point DV-chamber kicks in.

Dual-stage air spring is not the same as dual(or triple)-stage coil spring (one important thing is how progressivity differs in these different spring types).

Muchachos
6 years ago

Ha, this is how the Kawasaki KX450 forks work – and which are generally considered the worst riding MX forks out there, and the hardest to set up

Pinko
Pinko
6 years ago

You can try with dual chambers etc… but you are not going to improve small bump sensitivity unless you are willing to fully service the fork every month. Either go coil or formula or dvo. RS and fox are one step down, besides posting (rs) fake weight

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.