Home > Feature Stories

Retirement Interview: Bruce Gordon hangs up the torch

41 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

This was a difficult interview to put together for several reasons.

For one, as someone who has been an industry presence for over four and a half decades, Bruce Gordon is influential to a level that is impossible to capture adequately in a single piece. He has inspired scores of domestic framebuilders, including Paul Sadoff of Rock Lobster and Stephen Bilenky, to take up torch. The exceptional caliber and breadth of his work continues to set a bar for builders to aspire to and his early push into what would become 29er territory with his world famous Rock n’ Road tires and framesets shows a builder ahead of his time.

As a co-founder of SOPWAMTOS (Society of People Who Actually Make Their Own Shit), he has been a vocal and flamboyant critic of practices that he feels harm the bicycle as a machine such as outsourcing or simplifying product for better margins. This practice of challenging what many inside the industry perceive as the recipe for doing business has given him a rock star status in some circles and made him a pariah in others.

But really, this interview was challenging because while many interviews are about looking at the present and the future, this interview was done almost entirely looking to the past – and not with a lot of positive sentiment. Bruce was looking for a way to retire, trying every avenue that would allow him to avoid selling everything off. But prospects were not looking good.

Rather than cut this down to something easy, breezy, and palatable, I left everything nearly unedited so that the Chicago art student turned bike builder turned industry critic could speak for himself. Enjoy words straight from the Bruce’s mouth.

Bruce Gordon
Photo by Michael B. Woolsey

BIKERUMOR: You started in art, working on your masters at the Art Institute in Chicago. Within a few years, you were building bikes in California. What did that path look like?

BRUCE: I bought a Raleigh Grand Prix in 1970 when I dropped out of graduate school. Before that, I had Schwinn bikes. A friend of mine was living in Venice, so I moved to California.

I had a spiral bound notebook in which I wrote in pen, handwritten, a letter to Raleigh saying that I owned a Raleigh and really wanted to be a Raleigh dealer. I’m sure it’s still up at the Raleigh headquarters. It was really naive.

BIKERUMOR: “Dear Raleigh! My name is Bruce. I am twenty-four and a half years old…”

BRUCE: Exactly. “I own a Raleigh and I ride a Raleigh and it’s the best bike and I want to be a Raleigh dealer in LA somewhere.” I moved to Venice and worked for the Culver Bike Rack. It was owned by a guy who was a stuntman for the MGM Studios who did bull whips and axe throwing and whatever — this is what he did.

The bike shop he got into because his daughter had a boyfriend who wanted a bike shop. And then they broke up.

BIKERUMOR: And then he had a bike shop.

Bruce Gordon
Photo by Michael B. Woolsey

BRUCE: And then he had a bike shop. He didn’t understand that the boyfriend of the daughter had taken all the good parts out of the bike shop. I showed up and said “I’m here to work. I know about bikes.” I didn’t know relatively anything, but I bullshitted my way in there. Then he sold the business, finally, to an accountant from Beverly Hills. I think I was making six dollars an hour. The guy told me that he couldn’t afford to keep me. He drove a Mercedes and Cadillac. “I can’t afford to pay you six dollars an hour.”

Then I moved to Oakland/Berkeley area because I had another friend in Walnut Creek. And so I walked in what was College Avenue Cyclery. It was in Oakland. The manager was Elmer Bacciagaluppi. He had been in the bike industry a long time. They owned the Bank of America before it split up and became The Bank of America. He didn’t have any money. He hired me.

Then I met Albert [Eisentraut]. Albert was teaching classes.

BIKERUMOR: Both Chicago dudes on the West Coast.

BRUCE: Yes.

BIKERUMOR: Did you stick out? Did you notice each other for that?

BRUCE: No, no. Before that, I almost bought The Missing Link in Berkley. That was a cooperative that was on the campus originally. It was owned by the people who currently worked there. I showed up. I was a long haired hippie and I had $27,000…

BIKERUMOR: Wait, what kind of hippie were you that you were walking around with that kind of money?

BRUCE: And that was 1973. Yeah, so they never trusted me. So I went to a meeting. They said, “You may be a hippie and you may fit in, but how come you have so much money?”

After the Missing Link thing fell through, I went to work for Peter Rich. Peter offered me a job. I worked for Peter for two weeks before Albert’s class, with Joe Breeze and Danny Nall and all these guys. I was going to back to work for Peter, but I decided I really liked building. Albert was looking for money at that time. He had made forty bikes with six people— forty bikes a year.

BIKERUMOR: So not really an optimized operation.

BRUCE: And he didn’t have any machine tools— he had a lathe.

BIKERUMOR: What did the class look like? How many people? What was he teaching?

BRUCE: Maybe ten people. It was maybe ten days or two weeks. That was back in the days when we only used lugs. He would braze, “Okay, go at it.” Whereas when I taught the class, I would put my arms around them and hold the torch, but Albert didn’t want to do that.

I still have the book that Albert printed out. It was a pro forma thing. It was before computers. So it was all typed out by hand. Six columns of figures and pro forma invoices and pro forma data and pro forma revenues. It was a business plan. My father looked at it and said “You’re out of your fucking mind.” My father didn’t swear a lot.

Bruce Gordon Building
Photo by Michael B. Woolsey

BIKERUMOR: But he swore about that.

BRUCE: He swore about that. I was the typical middle class kid from the seventies. My father and mother — my father was against it. My mother was, “Well, if that’s what makes him happy!” So I invested $27,000 in Eisentraut Bikes, which was a shitload of money in 1973.

BIKERUMOR: You learned only in lugs, ten people in the class. Joe Breeze was in the class. Did you know him ahead of time?

BRUCE: No, I didn’t know any of those people. I went into business— Mark Nobilette had taken the class before I did, in Chicago. The one I took was in Oakland. Mark Nobilette was already working for [Eisentraut]. I agreed that I would go back to work for him and I would invest this money. I was under Mark Nobilette… all of a sudden, I invested money and I was Mark Nobilette’s boss. The magical thing was doing the brazing at Eisentraut. That was the ultimate job. He wanted to braze some forks and I needed some forks cleaned up. He says “I’m going to braze these forks first.”

“No, you’re not going to do it, Mark.”

So I fired him.

That’s a funny thing. This is 40 years later and Mark and I are good friends.

Bruce Gordon
Photo by Michael B. Woolsey

BIKERUMOR: Was it funny at the time?

BRUCE: No. I had never fired anybody. It was totally anti-everything I was thinking about. I stayed there for almost two years.

I was the Vice President of Eisentraut Bicycles Inc. My $27k bought me 33% share. But Albert said, “Oh, we’ll run it as though we are 50/50 partners. Within two years of being in business, we went from 60 bikes a year to 750. We bought a bunch of machines.

I came to the realization that if I had a good idea and Albert liked it, we did it. If I had a good idea and Albert didn’t like it, we didn’t do it. I was always going to be that person. On the 2nd of January of ‘76, I showed up and the door was open, the shop was there, and there was a guy sitting at Albert’s desk. I had no idea who he was. It was total mind-fuck kind of thing.

Finally, I realized it was Albert. He had shaved.

Bruce Gordon
Photo by Michael B. Woolsey

BIKERUMOR: It was business time.

BRUCE: Yeah. We agreed to split up. I said, “We’ve gone from 60 bikes a year to 750. We’ve grown this thing with my $27,000 dollars. I think perhaps, in two years, I’ve earned 10%.” I remember Albert saying to me, “It doesn’t matter what you think or I think, it’s what someone is going to pay for the business.” Albert changed the locks. I had invested all my money and I couldn’t get in the place.

BIKERUMOR: So he went home for the holidays and came back like this?

BRUCE: He went back to Chicago. Yes.

BIKERUMOR: Uffda.

BRUCE: I couldn’t go in the place. It was way before email and faxes and things. I had a lawyer in Oakland, who was a big time lawyer for the Raiders or the Warriors or whatever. Albert had what I call the sleazy guy. He was from San Francisco. They would write letters to each other. Six weeks went by. I’m sitting at home because I can’t get into the shop. Albert has the keys and is still writing himself checks.

BIKERUMOR: You needed cash to do something.

BRUCE: Yeah, I wanted to open a bike business.

It was a corporation so I had to find someone to buy the stock. After six weeks I got an offer that said when the corporation could afford to pay me back, they would pay me back at $14,000. I said, “No, there has to be a payment schedule.”

I went to a lawyer on a Friday. He said, “You can dissolve the corporation. Albert will end up with nothing. You will end up with nothing. And the lawyers will end up with money. Once you file the papers for disillusion, that’s it. It’s started.” I said, “Go for it, because I can’t sit at home thinking about this thing any longer. If I’m going to end up with no money, then Albert is going to end up with no money.”

BIKERUMOR: Wow. Whoa dude. That’s some spite engine shit right there.

BRUCE: Yeah, I’ve always been spiteful. I was sitting there and my lawyer called Albert’s lawyer. Albert’s lawyer was not in town, but he talked to a partner. It was interesting. Lawyers talking to each other aren’t adversaries. He was in the same law firm and said, “We’re going to file for dissolusion.” The other guy goes, “It sounds like you made up your mind.” “I think you owe it to your partner’s client to tell your client that it is happening at 9am on Monday morning.”

I was at home and someone slipped an envelope under the door that had another offer. Albert was paying me $300 a month and I was four or five months behind on my wages. Yeah, I would get $14,000 at $300 a month plus my back wages. I remember thinking: every month, the check would come a little bit later. By the end, it was two or three months behind. I remember thinking, “I don’t need the money terribly, but I know how pissed off Albert is writing this check every month.” We didn’t talk. He ended up paying me the $14,000 and my back wages of two years.

So I moved to Oregon and started my business with $14,000. That’s where Bruce Gordon started. With the $14,000, and my dad loaned me some money and I bought some machines and started Bruce Gordon Cycles with that.

BIKERUMOR: Did you set out to build a specific type of bicycle when you started Bruce Gordon Cycles?

BRUCE: No, we made mostly lugged racing bikes. Albert and I had done the Limiteds, which was my name. It was a weird deal because they were actually the Unlimiteds, they were named after the Buicks, so we did a bunch of fun logos.

BIKERUMOR: Eisentrauts were racing bikes?

BRUCE: They were mostly racing bikes, but he also did custom bikes. When I moved to Oregon, I looked at the market and touring was a dirty little secret. I always said that if people went to a trade show and saw what the industry thought about touring bikes, they would find a different sport. Touring bikes were the dirty word. I ended up making touring racks because it was a market. There were a million people — well, there were maybe 30 or 40 people making racing bikes. So I made touring bikes. I’ve never really long distance toured because I’ve never really had time to do it. I’ve done some tours.

I started in ‘76 and moved to Oregon. Lived there for 12 years and made bikes. Ross Shafer — I was painting the Salsa stems. Ross Shafer would send them, I would get a box full of stems in the morning. I would powdercoat the stems and send them back the same day. It was a pretty quick turn around. I was friends with Ross and I would come down here. I thought, Wow, the weather is really great in February here. The weather is really good in November. It was ten degrees warmer than Oregon. It didn’t rain as much, and the rain fell straight down. It didn’t come at a 45 degree angle.

I decided to move back to Petaluma after twelve years. I was in the back of Ross’s shop, which was down on the river, a couple blocks. I wasn’t really happy there because it was below the Mexican restaurant that Sean [Walling of Soulcraft] was talking about last night. I was underneath the street part, and there was a brick archway — it was maybe 300 feet long and maybe 20 feet wide.

BIKERUMOR: Was it in a basement?

BRUCE: It was above ground, but it was a basement. It was a building from the 1860s. I was in the part that stone walls — they were grout. I would come in and there would be all sorts of gravel on my things. I wasn’t really happy. The air came from 300 feet away, went by this doorway to my shop — just in front of the doorway was the chop saw. All day I smelled that thing. I wasn’t happy. So I moved to what was two blocks away from my shop now, which was another place. Ross never understood my sense of humor…

BIKERUMOR: So you went from being in the same shop to being next door neighbors.

BRUCE: And not talking. I didn’t have a bathroom, so I would use — this is really funny — Ross had a bathroom in his space next door to mine. So I would go in there and use that.

I used to get a whole bunch of people who would come into the shop. “Is Ross here?” I would go “Ross who?” “Salsa Cycles?” “Do you see anything named Salsa in here? This is Bruce Gordon Cycles.”

I made a map with Corel Draw that took you from my shop, downtown, across the river, back across the river to 2nd Street to next door. I still have a copy of that. It was a hand drawn map.

BIKERUMOR: I bet Ross loved that.

BRUCE: I give credit to Ross — he made the effort to say, “Hey, let’s cut it out.” I’ve had feuds with a whole bunch of people. Yeah yeah yeah. So we’ve had a love hate relationship.

Ross got bought out by QBP. And I remember, we weren’t talking at that time, but we were sharing a wall. I remember sitting out and I’d say, “You know Ross feels pretty strongly about his brand. It isn’t his name on it like Bruce Gordon. But Salsa was his thing, with the pepper man.” I didn’t want to be around in six months when they had aluminum tig welded bullshit from Taiwan. It took less than six months. QBP said making stuff in Northern California was way too expensive. They bought the name. They bought the logo.

Before he sold, Sean mentioned yesterday, Ross made money from tshirts, from coffee mugs, from quick releases. They broke even on stems. Frames were a loss. He had a meeting and he spelled this out to all these people. Essentially it was like, “All the stuff you guys that you think is important… and we’re making money on quick releases.” That was one of the harsher moments.

BIKERUMOR: When was that acquisition?

BRUCE: ‘93? Maybe ‘94? I never knew how much money he got, but I don’t think it was a whole bunch of money.

Ross is extremely talented. Sean is extremely talented. We’re all weird in that we all have our quirks. And the bike business is full of crazy people. It’s like — when you think of Ross and Sean and Steve Potts and Jacquie Phelan and Charlie Cunningham. They are extremely creative people.

BIKERUMOR: Today, you’re doing touring bikes and racks exclusively?

BRUCE: Mostly. I did racing bikes. I would much rather do racing… I would much rather do track bikes. The reason why? There are fewer braze-ons. And then there are racing bikes which have a couple more for them. And then there are touring bikes, which have millions of braze-ons and crazy people dealing with them.

BIKERUMOR: Yep. That’s why the world loves making race bikes.

BRUCE: The industry is run by product managers. I remember in the early 70’s when Colnago and the Italian bikes in the Tour de France went over to chrome forks. I remember seeing the first one and thinking, “It’s too bad. This guy had this nice racing bike, and crashed it and bent his fork and all he could get is a chrome fork.” And then I realized that the team, they made it so that teams in the Tour de France rode those things so that people wanted chrome forks, when in actuality, the manufacturers wanted people to want the chrome forks, because they didn’t have to paint them. Say you had five colors and there were five lengths of steerers… that was 25 forks you had to have.

BIKERUMOR: But if you have a chrome fork, you don’t have to worry about matching paint.

BRUCE: Exactly.

BIKERUMOR: You deliberately avoided industry. “Big Industry.” But you haven’t stopped going to trade shows.

BRUCE: The trade shows are pretty much a social event. The reason why I show up at trade shows recently is so people don’t say that they think that I’m dead. “Did that fucker die and we didn’t hear about it? Did he [choke on a] pork chop? I heard rumors on the internet…” It’s a big social event because I don’t sell enough tires.

BIKERUMOR: When did you get into making tires? Why did you start making tires?

BRUCE: When I was in Oregon, maybe ‘81, I was friends with Jim Merz and Mark DiNucci and Andy Newlands. That was when Jim was just was beginning to work with Mike Sinyard on the mountain bike. One inch top tube with 66 degree head angle. “Ride this thing! It’s really cool! You can ride up and down curbs,” I distinctly remember, he told me. I came back from a ride— it was raining, it was horribly muddy. And I said, “Yeah, you can ride up and down curbs. Cool. You know? But it’s never going to take off.”

And so I was wrong about that.

BIKERUMOR: You were riding up and down curbs on this thing not believing it.

BRUCE: Yeah. Then — it’s sort of like in 1993 we went to Friedrichshafen — which turned into Eurobike. We were in the American Pavilion. There was Paragon and I. I showed up with two bikes, Paragon had a bunch of parts in a box. We had no display. I wish I had a picture of the display because we hunted and gathered some hay bales and some packing pallets and made a display out of that. It was like, we were in a foreign country, we had to do it.

BIKERUMOR: You get some cowboy hats?

BRUCE: That was afterwards.

We were in the American Pavilion with this company that made these backpacks that had a bladder in them, with a clear plastic thing that you clipped on. I walked up to them and said, “I sure hope you didn’t pay American money to come here.” It was Camelback. Recently, I think they sold for 470 millions dollars. I was wrong. I was wrong about the mountain bikes and the Camelbacks.

If I say something is never going to make it, I would invest in it ‘cause I’m the kiss of death.

BIKERUMOR: You were wrong on mountain bikes. And you shared space with people who built mountain bikes.

BRUCE: The tires… the tires… everything was 26in. Before then, up in Oregon, I built a few touring bikes, but mostly they were all 700c. Gary Helfrich is a Titanium guru from back East. He found a Finnish tire… it was a 700×45. I built a couple bikes around it and it was — I made the same comment which was like — the angle of attack on a bigger wheel is smaller. It is less. So it makes sense. The reason that I used to give was the same reason they made six foot diameter stagecoach wheels. It would have been much easier to make two foot diameter stagecoach wheels— but it wouldn’t have rolled over things as easy.

No one was ready for 700c. In ‘93, I called Rock Shox. I know I called Rock Shox, because I wanted the Mag 21’s with longer fork blades so I could run 700c. I remember — I think I talked to Paul Turner. If not, it was someone who worked for him. They told me, “No. It’s crazy. No one would ever ride a 700c mountain bike.”

So I was wrong about that again, you know?

Gary — Gary found these tires, we built a couple 700c bikes around them. Then we decided that we were going to have some tires made. I made it a little rounder. Joe Murray, famous bike racer Joe Murray, he ended up drawing the tires and that was in 1988 and it was pencil line technical drafting. I faxed it to Taiwan. You know, just the way things changed in 25 years, it’s like that. Joe did the drawing, he was my product manager for that.

I couldn’t give the tires away. Everyone rode 26in wheel mountain bike off-road tires.

When I had prototype tires made, Bianchi got a tire and they displayed I think the Project 7, or something in the late 80’s, early 90’s, Bill Horner was the product manager there. They had a bike with my tires on it at Interbike. They had a note that this was their new prototype tire, which pissed me off.

BIKERUMOR: It was branded Bruce Gordon? It was the original Rock n’ Road.

BRUCE: Yeah. Yeah. There was a millimeter or two clearance over the tire. I told him, “This is a prototype bike, this is a bike for a show. But obviously, you’ll make a longer fork, longer clearance.” And he said, “No. Well, you know about the import duty.” I said, “Yeah, I know about the import duty” because I was importing bikes—

BIKERUMOR: The import duty being the tire import duty?

BRUCE: The whole bike. No one was making bikes. The import duty as I understand it — if a bicycle had a tire wider than four centimeters, it was 11%. If a bicycle had a tire that was under four centimeters, then it was 5.5%. So it was 5.5% difference. It was designed to protect American made cruisers. Between Raleigh and Schwinn — that was my theory. Someone paid a congressman to protect American cruisers.

When Gary Fisher first started Fisher mountain bikes, the original Fisher mountain bikes would come with tires under four centimeters on them. They would open the box, throw in a set of mountain bike tires. That way, they got around the duty because the tires were under four centimeters when they were brought in. Then, they changed the tariff so that it said if a bicycle had clearance for a tire larger than four centimeters.

BIKERUMOR: When was that shift? Do you know?

BRUCE: It was ‘89? 90? Bill Horner said, “If we change a cable…” At that time, I was bringing in the Hikaris. They were a lugged bike from Japan. They were XT equipped. They were light, recreational bikes. I knew — they were $450 they cost me, for a whole bike. So it’s like, what’s 5% of that? $20 bucks. I said to them, “For $20, you’re not going to make a bike that’s as good as it can be but fits the tariff.” I remember when Bill Horner said to me “If we change a cable guide and it costs a quarter more, that is a board of directors meeting.”

People don’t know this about the bike business, but it is ruled by money. It’s ruled by product managers and bean counters. I was pretty pissed off at Bianchi about that, the note saying that it was their new prototype tire… and it didn’t have enough clearance.

I had a thousand tires made.

BIKERUMOR: How long did that first batch last you?

BRUCE: Pfft! Years. Five years ago, seven years ago maybe? Sean helped me build — when 29ers were the big thing. Okay, I’ll build a 29er. Sean does this so I got tubing from him. I put the big Schwalbe tires on them, it was more or less a city bike. It’s upstairs in my showroom. They were lousy. So I said, “You know, I have one set of Rockin Road tires that aren’t all krispy that are 25 years old.”

BIKERUMOR: You kept them in the vault!

BRUCE: Right. I put them on that bike and took it to the tradeshow and everybody loved it. It’s like, “Wow!” That was the impetus. But, you know Wes Williams from Willits who worked for Ibis. Remember the 700c shock fork? He built that and he built himself one… and he became a big proponent of 29er. He always gives me credit.

BIKERUMOR: You designed a 29er tire.

BRUCE: As I say, there were 29ers before 29ers were 29ers.

Bruce Gordon
Photo by Michael B. Woolsey

BIKERUMOR: So you did the godfather tire. What was it like in 2008 where everyone was like, “26 is dead!” You’ve had this. You were making these.

BRUCE: But they weren’t as big. 29ers were way big. They were bigger. They were wider. Mine was essentially monster cross or gravel grinder. We used to call them road bikes with fat tires. But marketin g— you have to have a name for it. “It’s a fat 700c tire.” That’s what I called it. But they came up with 29er and the gravel grinder and the monster cross and all these names. I ended up putting those tires on and I took it to a show, and everyone loved them.

I switched over to Panaracer because they made tires in Japan. The country of origin is really important to me. I never look at anything, I never buy anything, that I don’t look at the country of origin on. I’ve been in manufacturing my whole life.

I’ve been very conscious and as a result, when I called I talked to Jeff Zell from Panaracer. Panaracer has three factories. They have a factory in Japan where their best tires are made. China is second. And there is a place cheaper than China, which is Thailand.

“Just for shits and giggles, tell me what the same tire going to cost…” because the molds were specific to the country. “I’m only interested in Japanese tires. But how much is the same tire going to cost me.” It was a $1.80 per tire less. I said, “Why would anyone in their right mind have the tire made in Thailand when for $2 more…” He said to me, “$2 becomes $20 retail.” That’s the way product managers and bean counters think. It’s the difference between a $50 tire and a $70 tire. What I’m doing is a tire for $52 without shipping. The trouble I have is that people are comparing it to a $50 tire at Mike’s Bikes. There is a vast difference because I’m eliminating one of the middle men. I always say, if I wanted a table made, I would go to a guy that made tables. I wouldn’t go to Ikea.

BIKERUMOR: Or you would make the table.

BRUCE: Or I would make the table. And the other story that I tell all the time to people is like, I’ve been at this for over forty years. In the forty years, there’s been many, many improvements. Shock forks — before that, there were motorcycles with shock forks, but nobody ever made a bicycle shock fork… they did, but turn of the century. Salsa made TIG welded stems. No one did that before. Phil Wood made sealed bearing hubs. No one did that before. All these things were made in three or four person shops.

The Taiwanese or the Chinese — if we were to wait for them to come up with the mountain bike, we would still be waiting. They can fabricate stuff.

My point is, you should support the people that think of this stuff.

BIKERUMOR: Rather than wait for companies that figure it out to make it, for that product to be safe space.

BRUCE: Yeah. That’s the drift of the thing. I’ve spent my whole career trying to make stuff cheaper. The only way to make stuff cheaper is to eliminate the middlemen. I sell tires direct to dealers, but I don’t sell them to Quality, who sells them to dealers. I’ve sent a whole bunch of tires to people who work for Quality. I say, “Please don’t copy my tires.” If QBP comes out with a $50 tire retail? It’s going to be a tire made in Taiwan or Thailand, it’s going to be a shittier tire.

I sell a lot of them in Europe to shops. You can’t buy them on the store. I have to figure out the freight for Europe. I’m not an Engineer. Quality and Specialized have these “tire engineers.” It’s like: bullshit. My tires are from before they had directions on tires. I get a whole bunch of people who call me and say “there’s no direction arrow on the tire.” I always put them on so that the label is on the right side. If you find that putting them — Sean actually put the back one reversed. If you find that it works better, call me and let me know. I can’t do that.

It somewhat bothers me that I’m making my money off of tires. But, I designed it.

BIKERUMOR: Cause you’re a founding member of SOPWAMTOS (Society of People Who Actually Make Their Own Shit).

BRUCE: Yeah. The storefront that I want to start, I kiddingly say to people in the industry, is the anti-Velo Orange store. I want to sell stuff where — and I’m not xenophobic, it can be Japanese or Italian — I want to sell stuff where the name of the factory is the same as the name on the product. There is no Velo Orange factory. There is a Honjo factory. Their fenders are world’s better… and that’s an important thing. There is a Nitto factory. There is not a Soma handlebar factory. I’m trying to eliminate the middlemen and sell the good stuff.

I don’t fit in the bike business.

BIKERUMOR: Let’s discuss SOPWAMTOS as a concept. It re-manifested for the first time in ten years at NAHBS. I think it is an important concept.

BRUCE: It is!

BIKERUMOR: I don’t think people understand the world it was created in.

BRUCE: SOPWAMPTOS started — Mark Norstad and I went to Eurobike, the precursor to Eurobike. When we were on our way back, we were thinking, “You know? Joe Breeze and Tom Ritchey? They get flown to Friedrichshafen. They get picked up from the airport in a Mercedes. They sign autographs for two days. They get driven to the airport and they fly home. We were the CEOs of our own company. We made all the shit. We flew in all the shit. We made the display. We manned the display. Four days later, we were going to Las Vegas after we came back. On the way back, we founded SOPWAMTOS.

This was ‘93. It was tongue in cheek. It was a funny, stupid thing. It was all about country of origin and actually making shit as opposed to causing shit to be made— which I’m not poo-pooing. But, it’s a difference.

The first year, I don’t think we did tshirts. The second year, we did an award ceremony. That was when David Falco was working for Recycle Town at the landfill. “SOPWAMTOS is the Society Of People Who Make Their Own Shit, so let’s give away toilet seats. I can get you as many used toilet seats as you want.”

We used to get toilet seats from the dump. We used to hose them off. That was it. We’d spray paint them gold and letter them and give them away.

BIKERUMOR: Wow. That’s so literal!

BRUCE: Yeah! They were toilet seats from the dump! Sean did it one year, five or seven years ago. I said, “Are you going to do it again?” He said, “It’s a lot of work!” “Yeah, it’s a lot of work.” “I’m not going to do it again.” That was the year of the Cannondale fist award. Cannondale had a big rubber arm which he made into a trophy. I think someone picked it up and put this in the trash. This last year at NAHBS in Sacramento, Robert Ives wanted to do it.

Robert decided that it should be at Interbike as opposed to NAHBS because it is more industry stuff.

The third year we had the hula hoop girls. We wore our fezes. We were wheeled down the aisles. Someone came up and said “You can’t do this! You’re causing a thing!”

All the decisions were made at Dempseys. I still have all the cocktail napkins that we made our decisions.

BIKERUMOR: So Mark comes up here, you have beers, and —

BRUCE: We would think of who deserved an award. Second step was: what award do we give them? Third step was: who are we going to nominate that won’t get the award? In the archives, it’s on my desk, is all the cocktail napkins, all the lists, and all the awards. The second year… we gave the “Smoke and Mirrors” award to Cannondale for the pong bike. Remember the pong bike? The CNC machined bike? Remember the skateboard wheel bike? That was the second year. Scott Montgamery was the president. He would send me Christmas cards thanking me, said that he hung those toilet seats proudly on his wall in his office.

BIKERUMOR: Did he get it?

BRUCE: Yeah, I think he got it. Yeah.

BIKERUMOR: Cannondale was still making their product domestically at the time, though.

BRUCE: But they were making smoke and mirrors shit that wasn’t available. The first year we gave toilet seats, we had the best R and D award, “Rip off and Duplicate.” That went to Specialized. I ran into Mike Sinyard in an elevator after the award ceremony. I said, “I think you got an award.” “What was it?” “I’m not going to tell you. Send somebody to the booth to pick it up. But I think that you got one.” I knew that he got one. I saw him a few days later. “Did someone pick up that award?” “What award?” And he turned around and walked away. He didn’t talk to me for ten years. Since then, we’ve talked. I’ve run into him at one of the handbuilt shows, at San Jose. He was like ten feet away and he was smiling and laughing and talking to somebody. He said, “Are you still in Oregon? You’re still in Oregon aren’t you.” “No, I moved 25 years ago.” “Oh! You moved!” “I’m in Petaluma.” “Wow, that’s Bay Area! We should have you do some design work or something!” “No.” That’s where the excellence in litigation award, the grand prize, came from Specialized.

The bike business used to be more fun. I’ve been saying for years, no one makes nearly enough money doing what they do, so you might as well have fun with it.

BIKERUMOR: You did make mountain bikes for awhile.

BRUCE: I’ve made maybe ten or fifteen mountain bikes.

BIKERUMOR: How many bikes do you think you’ve made total?

BRUCE: Two, three thousand? Somewhere between two and three thousand.

BIKERUMOR: What about the Hikaris?

BRUCE: They were a cast lug — my first foray into Japan. I learned my lesson on that. The Hikaris were recreational bikes. They had racks, but they weren’t full blown touring bikes. The Rock n’ Roads that had Bruce Gordon stickers on them, those were made in Japan. I ended up hearing “All Bruce Gordon bikes are made in Taiwan.” Then I had all the Bruce Gordon’s made at my factory. The rest would say “designed by Bruce Gordon.”

The Hikaris… I went to the factory, I told them I wanted “Made in Japan” underneath the clear so you couldn’t peel it off. I also told them I wanted on the bottom bracket, all the tubes mitered full. They said, “Why?” “Cause that’s the way I do things.” Their answer to that was, “For the same amount of money, we could paint the headtube a different color.”

BIKERUMOR: And you were like, “Nah.”

BRUCE: Yeah.

BIKERUMOR: Why have a bike line made in Japan?

BRUCE: To bring the cost down.

BIKERUMOR: Expand your income? Your impact?

BRUCE: Hopefully. It didn’t work out that way. There were only 100 Hikaris. Maybe 200. The Rock n Road became a TIG welded bike. The Bruce Gordon Rock n Roads are very rare. Only about 100 made. They became the “BLTs.” I decided that all bikes that said “Bruce Gordon” on the downtube were going to be made in California in my shop.

I designed the BLTs… they were going to be the same thing. I couldn’t give em away. The Taiwanese ones, that was a third effort. That was a nightmare.

I would rather sell 100 tires than sell one bike.

BIKERUMOR: It’s less work on your part.

BRUCE: I’m 68 years old. I’ve done it. I don’t have to prove it to anybody. I’m secure enough in my masculinity that I was pretty good at doing stuff, I’m not as good as I used to be. The L’Eroica, that’s a later thing. There is a guy that shows up on the internet. It’s a bike I built in the 70’s. He’s had it repainted, there are pictures all over the internet. He rode it in the L’Eroica. Paul and I had gone down for that. He ended up coming up to Petaluma and said to me, “Do you have any souvenirs?” “Souvenirs?” He ended up buying two water bottles. $10. “Mine is one of the good old ones because Bruce Gordon doesn’t make them anymore.”

Fuck you. I made this stuff. Do I make the entire thing? No. As I said, I wouldn’t ride a bike to the mailbox that I welded. I’m not a welder. When the welder comes in, the only thing that I do is that I drop the dropout on the chainstay so I can miter them and they weld the rest of it.

Bruce Gordon
Photo by Michael B. Woolsey

One welder comes and he says, “I can always tell when you’re welding. Number one, there’s nose prints on the inside of the screen. Two, the tungsten looks like a metal q-tip…” because I have all sorts of steel on it.

Would you ask Mr. Colnago, Mr. Cinelli? No! It’s made in my factory. I do way more work on my bikes than those guys, who are deified.

BIKERUMOR: You’ve got these brands like Colnago and Cinelli where their founders are deified without building. And then you have this culture of small builders in the US where it is one person, slaving away in poverty, spending 300 hours polishing a headtube in the shop by themselves.

BRUCE: Yep. Do you know why Brian Bayliss died? Pneumonia because he didn’t have health insurance. No one dies of pneumonia in your 60’s anymore. You go to the doctor if you have health insurance, you get a $10 prescription. It’s fixed. He waited too long.

I was thinking that if I was French, I would be a Constructeur. I’ve made tail lights. I’ve made handlebars. I’ve made seatposts. I’ve made racks. I’ve made brakes. I’ve made cranks. I’ve made panniers. If anyone qualifies as an American Constructeur, it’s me. I’ve made a whole range of things. I can’t call myself a bicycle Constructeur. Someone else can call me that. I can’t.

The brakes for example, I was building a lugged randonneur bike for a guy for one of the shows. The brakes — there were Shimano brakes, there were Paul brakes… they didn’t fit on the bike. I made a couple different versions of the titanium ones. The Shimano ones worked fine, so I measured from the post to the pad, from the post to the anchor. Came up with a triangle, and made them. I improved upon the PAUL ones a little bit — that mine have a bronze bushing in them that was pressed in that could be replaced. The PAUL ones run on a stainless steel thing that fits over the cantilever post. If you get a piece of grit, it galls the aluminum up.

But basically, I can’t think of the last time I sold those parts. I’m not going to make anymore.

BIKERUMOR: There is a list of stuff that Bruce Gordon won’t do. The Schnozola stuff, however, is an exception to those rules.

Paul Sadoff of Rock Lobster
Schnozola Co-Founder, Paul Sadoff

BRUCE: But that’s a collaboration between me and Paul Sadoff.

BIKERUMOR: You won’t do thru axles.

BRUCE: No. There are just some things that I won’t do.

BIKERUMOR: You’re done.

BRUCE: Yep. I’ve built enough bikes. If that’s what stands in the way of me building more bikes. I won’t build more bikes.

BIKERUMOR: So I’ve talked about Schnozola from Paul’s perspective because he was stalking you as a fan for years. He is one of many domestic builders I’ve talked to who credit you for getting you into framebuilding, for setting a standard. “I’m going to do that too.” Bilenky and Paul Sadoff both said that.

BRUCE: Bilenky — I hadn’t heard about that, but I’m humbled by that. The Paul Sadoff thing… I don’t understand why we’re doing it. But all I do — I powdercoat them red. They are all red. And they all have my tires. Other than that…

BIKERUMOR: There is no design commonality.

Bruce Gordon
Photo by Michael B. Woolsey

BRUCE: Except for the red paint. You want a blue one? You gotta buy a red one and strip it down. There are five Schnozola’s in the world. Three of them are sold. The first one was sold to Jeff Traugott, his neighbor who makes guitars.

BIKERUMOR: I think it’s really sweet. The bikes are interesting. I love the branding. Considering that you’ve made a career out of making statements, this bike is a statement. You aren’t enjoying that aspect of it?

BRUCE: I am enjoying it. When we had the booth at Sacramento…

BIKERUMOR: The Klezmer music! The same six songs blasting on repeat— off a cassette tape!

BRUCE: Off a cassette tape. Yeah that was all Paul.

BIKERUMOR: Handing out yarmulkes.

BRUCE: We were selling them! People came by the booth… it was more schtick than interesting stuff. Paul and I have made plenty of fancy bikes, well, I have. The bikes at the show were bikes that people ride. They weren’t show bikes. As a result, we haven’t sold any. If we sell these other two, maybe make some more. If not, there might be five of them.

BIKERUMOR: Relatively, a lot of hype for the brand, though.

Schnozola
Used with permission of Paul Sadoff

BRUCE: Thank you. Have I told you the story behind the logo? I found this font that was Hebraic in nature. It was $20. I took Schnoz 1 down to Santa Cruz. I had powdercoated it red. I stayed with Paul overnight. We went out to dinner. I said, “You know, we’re going to have to come up with a logo. Let’s just buy this font.” He says, “$20… that’s a lot of money! I can do it for less.” “$20, let’s just buy it!” “We just need some of the letters, we don’t need the whole alphabet!”

Turns out Paul had done calligraphy when he was in college. He’d designed that logo in about thirty minutes. Just drew it out. It’s still — he has it scanned from a pen ink drawing.

Schnozola
Used with permission of Paul Sadoff

The headbadge is his father, Sydney with the big nose. That also doesn’t exist in a drawing form.

BIKERUMOR: What is actually the state of your operation right now?

BRUCE: What is the state? I make all the stuff. I make stuff as people order it. I used to do stock racks. I used to have a bunch of racks in stock. I used to have a whole bunch of bikes in stock. Now I just make em one at a time.

BIKERUMOR: You have some in production.

Bruce Gordon
Photo by Michael B. Woolsey

BRUCE: A few. They aren’t made up. They aren’t finished yet. And toe clips. I try to sell everything that people buy, I try to send out right away. Like the tires — boom. An order comes in from PayPal, I pack em up and ship em out the same day. Bikes, eh. Two or three months delivery time. That’s one of the hardest things. I had one guy who called me about a bike. I told him two or three months. And he called me three weeks later. I couldn’t deliver it in that. He yelled at me for forty—five minutes on the phone. “You’re a sleezy businessman in three months and now you’re saying you can’t do it. I’ve bought tickets to France and you’ve ruined my trip to France.” Well, when you order it and you put a deposit down, you get a date. Until then, it is an estimate. That’s the most difficult thing I have to deal with, is the customers.

BIKERUMOR: Considering… two or three months from a domestic builder? When you’ve got people with 30 year waitlists?

BRUCE: Exactly. My theory is — it’s a few years old, but Richard Sachs and Vanilla used to have this competition going as to who was the best in the world. The best in the world was the one with the longest waitlist.

BIKERUMOR: Paul wrote something hilarious about that.

BRUCE: Paul is making a hundred bikes a year. A hundred bikes this year. He makes two or three a week.

BIKERUMOR: With no one working with him.

BRUCE: Yeah. And they are all different. They are aluminum. They are steel. They are all custom. He has a list of thirty or forty people. I don’t know what the Schnozola’s are. They are maybe $50 or $75 cheaper? So why not? I don’t know why we are doing them except that Paul wants to do them.

But he’s really prolific. He makes a lot of shit. They are all these materials, standards. All these parts. I talk to him three, four times a week. He works really hard. He’s always there. He’s always making stuff. It’s impressive. I stand in awe of the people, you know.

BIKERUMOR: You’ve personally experienced over the duration of your career — you were part of one wave, and then there were two pretty significant waves of framebuilders after you.

BRUCE: When I started, when Albert and I started, I would venture a guess that there were twenty to thirty people in this country building bikes. In the early 70’s… Richard Sachs, Ben Serotta.

BIKERUMOR: Building for themselves somewhere. Because when you started, there were still significantly sized domestic bike factories.

BRUCE: Oh yeah. I’m talking custom shops. But nowadays, there are probably two or three-thousand framebuilders. As I always say — I’m not threatened by them, but if each of them takes two three orders away from a person who really knows what they are doing and who has been doing commercially for a living, that’s how I’ve gone from a hundred bikes to five.

My 95 year old mother wants me to sell everything.

BIKERUMOR: But you don’t want to be that guy.

BRUCE: I just don’t want to be that guy. I don’t want to be that guy.

BIKERUMOR: The 68 year old guy in the back of the room —

BRUCE: Watching people paw through your stuff and saying, “You want a buck for that… will you take ten cents?” You know?

BIKERUMOR: My terminal question every time is, “What do you tell the kid who wants to be the next Bruce Gordon?”

BRUCE: I wouldn’t recommend it.

BIKERUMOR: You wouldn’t recommend it? What would you tell them?

BRUCE: I have a whole bunch of people go, “Well, you know you’re Bruce Gordon.” I say, “Can you TIG weld? Can you TIG weld light steel tubing? Okay, that’s one thing you oughta learn. Two, you oughta learn how to do CAD drawing. Three, you oughta learn how to run a CNC machine. If you can do those three things, you can walk into any place that makes anything, and get a job. And then if you want to build bikes in your garage, be my guest. It’s a piece of cake.

Learn to be a welder, because there is a real shortage of welders. And it’s like, you can almost write your own ticket. But you have a limited timeframe. Like Eric Baar? He’s a spectacular welder, but he’s not going to be 30 years from now.

BIKERUMOR: There is a time limit.

BRUCE: ‘Cause you make money with putting your hood down. You don’t get paid with your hood up.

So, to the person who wants to be the next Bruce Gordon… I don’t know. I’m the wrong person to ask.

BIKERUMOR: Well, okay. End scene.

BRUCE: End scene.

If you number among Bruce’s fans, consider attending his retirement party and warehouse sale next week (November 3-5th). Information found here.

BGCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

41 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
lop
lop
6 years ago

Man, Bruce Gordon sure is wrong a lot.

Dave Porter
6 years ago

Nice article. Bruce, as usual is right, the bike industry isn’t what it used to be. Or, maybe some of us never fit the box. DP

mudrock
mudrock
6 years ago

Wow, what a cool dude. Must be hard being an artisan in this business.

On the other hand, I couldn’t ever afford one of his bikes. A victim of economics.

beezus
beezus
6 years ago

I don’t read the bold parts.
leading the witness is overrated.

Jon Spangler
6 years ago
Reply to  beezus

Leading the witness?!? Hell, getting Bruce to do an interview is a remarkable achievement! For doing that, she can (try to) “lead” the witness as much as she wants. (Not that Bruce would ever follow an interviewer where he did not want to go…) 😉

Smokestack
Smokestack
6 years ago

Bruce and I have a lot in common. I have sat in meetings where both tapered steerers and 12×142 through axles came up. I poopoo-ed each of them. Enjoy the ‘retirement’.

Crash Bandicoot
Crash Bandicoot
6 years ago
Reply to  Smokestack

Forgive my Naivety but what exactly is the problem with a thru axle? Forget the stiffness claims on a Disc brake equipped bike they provide much more consistent rotor centering.

Paul
6 years ago

I met Bruce in Denver at his show. In fifteen minutes of chatting I learned tons about how making bikes doesn’t pay but selling garbage does. I also met Albert and he told me the same.

Brad Comis (@BradComis)

That was an awesome read. Thank you for doing this interview!

fred
fred
6 years ago

I can only hope to be this crusty when I am 68…

Eric Baar
Eric Baar
6 years ago

30 years from now I will be Bruce’s age.

Sherwood Gibson
Sherwood Gibson
6 years ago
Reply to  Eric Baar

Bruce was right though, welding is a perishable skill that goes as your eyes do. Fortunately, so far, at 57 my vision is still ok…your mileage may vary.

curtisinglis
curtisinglis
6 years ago

I wear readers under my helmet now

Tim
Tim
6 years ago

Bruce exudes “good people”. The end of an era.

David Lee
David Lee
6 years ago

Hell yeah. Awesome read. Thank you!

Paul
Paul
6 years ago

Great interview. I feel his pain.

Suzy Hess Wojcik
Suzy Hess Wojcik
6 years ago

He’s totally cool! I have a bike he made for me many years ago in Eugene, Oregon when he lived here. Still love it, still ride it and I’m 75.

paul H. Sadoff
6 years ago

I am so happy that this interview happened. I have known Bruce for at least a decade and known of him since the ’70’s but did not know the history. Thanks !

Jon Spangler
6 years ago

Having known and ridden with Bruce (until he decided to ride faster, that is) since the 1970s in Eugene, OR, I can attest to the authenticity of this interview and to Bruce’s genius and artistic creativity. It is one of my deepest regrets in life that I have never been able to afford the absolutely justifiable cost of having him build me a made-to-measure frame/work of art.

Long live SOPWAMTOS (Society of People Who Actually Make Their Own Shit)!

Hotep
Hotep
6 years ago

Anna, you do a remarkable job with these builder interviews. This one, without out exception is remarkable. Bravo.

Rich Lytle
Rich Lytle
6 years ago

Of all the curmudgeons, Bruce Gordon is my favorite!

Craig
Craig
6 years ago

One of the best interviews I’ve ever read on BikeRumour. Thanks Anna and thanks Bruce. It was brilliant to get the opportunity to hear from someone who has so much experience and skill and who has applied this over decades in the bike industry making fine products. I’ve never met you Bruce, but wish you well for the future.

rusty miller
6 years ago

Great article Anna! and thanks to Bruce for keeping it real for all this time! truly an inspiration!

k
k
6 years ago

I like my Bruce Gordons salty and unfiltered. Great interview!

Adam
6 years ago

Really great interview… lots to think about…

LSP
LSP
6 years ago

Such an engaging interview, well done! What a ride BG has been on, thanks for the insight and ponder points.

dwan shepard
6 years ago

Nicely done, Anna. Bruce is the king. Long may he reign.

AngryBikeWrench
6 years ago

Great interview, but depressing. Bruce Gordon strikes me as being incredibly smart and talented as well as savvy in business, yet in all his years, he couldn’t figure out how to make money on bikes. My honest question to those with deeper industry experience – what does this say about the industry? In cold economical terms, it doesn’t seem to be a supply issue – there are so many options out there from custom, small-batch, and domestic manufacturers. So is there really that small a demand for these products? I worked retail for 15+ years and another 5 for a distributor, and it seems like the industry has been dealing with the same issues the whole time, seemingly without solving anything.

Penn-Teller
Penn-Teller
6 years ago

ABW, your question reminds me of the old joke about how to make a small fortune in the bike industry: start with a large one.

Bruce Gordon is indisputably smart and talented, but no one who’s broadly “savvy in business” expects to make a lot of money in the bike industry. My time in the bicycle trade press made it abundantly clear to me that bikes are a low-margin business, and the only US-based bike-industry companies that turn a substantial, regular profit are the ones that people love to hate such as Trek and Specialized.

What often distinguishes them from “artisanal” operations is that they’re run as businesses first and bike companies second.That means they make some decisions that are deeply unpopular with enthusiasts, many of whom value ideological purity above all else. I’m not necessarily defending those decisions, by the way.

Artisans don’t make much money in any industry, and it’s naive to expect the bike industry to be any different. BG mentions Eric Baar, whose welding is outstanding. He could be making six figures as a nuclear-certified or offshore welder, yet he chooses to work just as hard in the bike industry for a fraction of the pay. In a just world, he’d make the same amount either way. But the world isn’t just, and neither is the bike industry, as BG’s experience illustrates. Some people shake their fists at the injustice and leave the industry disillusioned, while others just decide that the salary/lifestyle tradeoff is worth it.

Butch Boucher
Butch Boucher
6 years ago

Thanks Anna and Bruce. Frame building elegance at it’s best. I was lucky enough to buy a bike from Bruce in ’81 that became one of the inspirations for me to get in the bike building business almost 30 years ago.

AdamBike99
6 years ago

Anna Schwinn for Prez!

Casey F. Ryback
Casey F. Ryback
6 years ago

Definitely a great interview. Although as someone who has not really followed him in my time in this industry and therefore not really developed a bias or soft spot for him, he really comes across as bitter, and holding grudges against nearly everyone. No reminiscing on a life well lived or having had lots of fun or meeting lots of cool people or any of that, but more like Frank Costanza at Festivus – “I got a lot of problems with you people, and now your gonna hear about it!” Bicyclepubes hit the nail on the head.

Paddy
Paddy
6 years ago

The Cannondale rubber arm award did not finish its life in the garbage… It resides on a special shelf in the most secret of bike industry offices… Hahahaha

Dan Christopherson
6 years ago

I met Bruce once at the Marymoor Track during the 1977 Seattle Nationals. He was showing off one of his handmade bike (his personal bike) and was attracting quite a bit of attention. I had built over 50 bikes myself of my own “Futzbinder” brand and thought we might have a bit in common to chat about. I was wrong. He, like so many other young bike industry workers and enthusiasts, was quite cocky and arrogant. I remember asking him why he brazed a steel Campy micro adjustable saddle clamp to the top of his seat tube, which extended through the seat lug, making for an unadjustable seatpost! He answered that he knew his exact saddle height and would never need to adjust it. Well, that was an innovation I had never seen and probably will never see again.

I also had the opportunity to meet Peter Johnson (another California framebuilder) there. What a contrast! He was very friendly, self-effacing, gracious, and polite. Peter represented the way every bicycle framebuilder, designer, or mechanic should present themselves.

Dion Goldsworthy
Dion Goldsworthy
6 years ago

I bought a Chinook (Gordon’s stock all-around frame) from Bruce in 1984. He was still in Eugene and I got it mail-order. It’s a beautiful bike, Lilac, like the frame in one one the included pictures. I have ridden it for more than 30 years, and it is still a lovely ride! Most recently at the Eroica California, where it handled about 35 miles of dirt roads wonderfully. I’ve been in the outdoor specialty industry most of my life and there are a lot of similarities to the bike biz. Unfortunately, it is often not enough to be a fine craftsman or even a gifted artist. Those who succeed commercially at whatever level, usually have to team up with others who have complementary skills to make it a sustainable business. Even if you make great stuff, it usually requires some marketing and business skill (and don’t forget luck), to make a living doing what you love.

Katherine
Katherine
6 years ago

Thanks, Anna. When I first met Bruce at Interbike, someone was passing around “Bruce Gordon was nice to me!” buttons, so I assumed it meant he wasn’t nice. But that wasn’t the case. I and the Dirt Rag crew had dinner with him one night and he could not have been more enjoyable to talk to—a great storyteller, a little bit grumpy about the bike industry (in a funny way and aren’t we all) and encouraging to me as a young woman to stick with my passion for bikes. I’m sorry not everyone had a perfect experience. The characters are part of what makes this dysfunctional bicycle industry family so interesting…

Ed Johnson
Ed Johnson
6 years ago

I have been a fan of Bruce and his bikes for many years, and am saddened by his retirement. In my semi-retirement, I have worked part time in a retail bike shop and I am frequently reminded how often retail shoppers focus too much on a bike’s appearance and price vs ride quality, build quality, or value. Regrettably, it’s the world we live in, and it’s a shame that designing and builiding quality bikes — vs. the BUSINESS of building and selling bikes — aren’t necessarily congruent.

Somewhere in the 90’s, I bought one of Bruce’s Japanese-built BLT’s (I couldn’t afford his Rock ‘n Road US-made bilke) equipped with his racks and later his panniers. The bike has served me well on MANY miles of loaded touring, and will be my ride of choice on a coast-to-coast cross-county tour upon full retirement.

Looking ahead, I hope Bruce can continue to contribute to the industry (and make a living) with design consulting or writing — perhaps even his own curmudgeonly industry newsletter. Similarly, I hope that NAHBS continues as venue for builders like Bruce and others to showcase their talents and make a decent living. As cyclists, we need this. Be well Bruce!

John Caletti
6 years ago

Thanks for the longer interview. There is so much more as well. Bruce has done some very creative work and a wide range. I hope some of his bikes are preserved in a museum.

Barbarossa
Barbarossa
6 years ago

A High School classmate of mine went on to achieve a MFA, from a prestigious university in Seattle. He spent years–decades–crafting art in a wide array of mediums, and sold wood blocks in Pike Place Market. Now, in his mid-50’s, he lives in near poverty in the WA Olympic Peninsula, getting sustenance from the local charity food pantry, and bemoaning on FB that ‘an artist today can’t make a living because no one appreciates fine craftsmanship, and will pay for my art’. So unfair!…he yelps.
We all make choices with our lives. Bruce Gordon made his choice, and lead the life he wanted. His current state is a culmination of his choices–no different then the rest of us. He has nothing to complain about. None of us do.

Caleb
Caleb
6 years ago
Reply to  Barbarossa

Those suffering famine and bombings (to illustrate by extreme example) show us complaint is sometimes valid by most philosophies. Everyone’s current state results from far more than simply their own choices. The simple fact that anyone in the industry has to rely on customers conveys as much, even.

ern
ern
4 years ago

i love my bg. will never get rid of it. RIP Bruce Gordon. a real one

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.