Home > Bike Types > Road Bike

First Impressions & Actual Weights: Microshift Cento 11 road bike group

Microshift Centos 11 speed road bike group review and tech details
17 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Microshift Centos 11 speed road bike group review and actual weights

It was time to mix up the build on our original World’s Funnest Bike, and Microshift had sent in one of their upper mid level groups for review. I’ve wanted to try a Microshift group for some time because, well, I’ve just wondered how they stacked up against Shimano, SRAM and Campagnolo. And, I mean, honestly, you’ve probably wondered that, too.

The Microshift Centos 11 is billed as sitting between Shimano 105 and Ultegra, with the Arsis 11 group sitting above it as their Ultegra/Dura-Ace competitor. They don’t make cranksets or brakes, so we received the shifter levers, derailleurs and cassette to test, along with one of Taya’s best chains. Here’s how it came together on the Van Dessel WTF…

MICROSHIFT CENTOS 11 ACTUAL WEIGHTS & INSTALL NOTES

Microshift Centos 11 speed road bike group review and actual weights

Shifter levers come in at 248g and 250g each. These and the other parts are all supposedly Shimano compatible with 9000/6800/5800 groups. The derailleurs and brake levers also come in white, and they have compatible flat bar and TT bar-end shifters available, too.

Microshift Centos 11 speed road bike group review and actual weights

Front derailleur is 95g and rear is 198g.

Microshift Centos 11 speed road bike group review and actual weights

The cassette is 368g for an 11-32. They also offer an 11-25 and 11-28 option. I chose the widest range cassette because it’s going on my “fun” bike that’s used for a little bit of everything. Here’s how that compares:

Microshift Centos 11 Shimano 105 5800
Front Der. 95g 90g
Rear Der. 198g 228g
Shifters 498g 500g
Cassette (11-28) 311g (claimed) 277g (actual)
TOTAL 1,102g 1,095g
DIFFERENCE +7g

The Taya ONZE-115 UL chain comes in at 249g with 116 links, including quick link.

Microshift Centos 11 speed road bike group review and install notes

Microshift Centos 11 speed road bike group review and install notes

Installation is straightforward, as easy if not a bit easier than setting up any other mechanical group. The only issue I had was with the shift cable housing’s exit ports. If you were running it straight out, there’d be a little bit less of an issue, but I wanted to use the diagonal groove to run that cable alongside the brake cable under the tape. Both require a  tight bend to put it flat against the bar, the diagonal option more so. Electrical tape helped hold it down while I wrapped the bar, and the bar tape did the rest to get it all laying tight against the handlebar. I thought that bend radius might lead to cable friction, but shifting is smooth and light.

Only other thing worth mentioning is that it’s a bit tough to get to the clamp bolt that secures the lever body to the handlebar. And you might need to get a flashlight to find the right click placement to start feeding the shift cable in, but once it’s in, set up is easy. The brake cable almost guided itself into the hole, putting a smile on my face.

Microshift Centos 11 speed road bike group review and tech details

For the rest of the build, I kept the FSA SL-K cranks from the original WFB project…

…along with the TRP HyRD brakes for now, but these will probably get swapped out soon to review different calipers. Microshift’s cable pull works very well with these calipers, offering plenty of power and easy setup.

So, the big question is, why would you want to stray from the big three drivetrain brands? This group with all parts shown here retails for about $320USD. That’s close to or just under MSRP for the same parts collection from Shimano 105 and Campagnolo Centaur. If not price, it’s got to come down to the details…

MICROSHIFT CENTOS 11 FIRST IMPRESSIONS

Microshift Centos 11 speed road bike group review and tech details

Microshift Centos 11 speed road bike group review and tech details

Microshift’s cold forged aluminum levers use a familiar flared brake lever to make them easy to reach in any hand position. The hoods are similarly shaped to other brands, with girth somewhere between SRAM and Shimano mechanical levers. The shift lever positions mimic Campagnolo’s, but the thumb lever is differentiated with an additional section that makes it useable when in the drops.

The shift paddle and thumb lever are both oversized compared to competitors’ levers. Folks with smaller hands or limited reach might like this. They offer tooled brake lever reach adjust.

It’s equally accessible in both hand positions – advantageous if you’re in a sprint and need to shift to a harder gear.

There’s a lot of lever throw to initiate a rear downshift (easier). At first, I thought this might be where Microshift saved dollars, but I went back to feel Campy and Shimano levers and they have similar “dead stroke” before starting to pull cable. Only SRAM, with its single lever design, has immediate action. You can get four downshifts from a full lever throw, but that ends up putting the lever at almost 90º from its starting position, which isn’t the most ergonomically easy feat. Upshifts with the thumb lever are single click affairs.

Microshift Centos 11 speed road bike group review and tech details

Microshift Centos 11 speed road bike group review and tech details

Since the parts didn’t come with any cables preinstalled, I reused the cables and housing from the original build to speed up installation. The front derailleur mounted cleanly to the carbon Parlee FD clamp, and cable routing under the bolt kept a straight path. Everything worked smoothly after minimal limit screw adjustment.

Microshift Centos 11 speed road bike group review with Taya ultralight road bike chain

A big part of shifting performance is the chain, and the Taya 115 UL impressed me. It’s ultra quiet, shifted very, very fast, and it’s got their ultra hard coating and anti-rust treatment. Plus, with all of the links (inner and outer) cut out and  the pins hollowed, it’s light and looks bad ass. The gray finish matches the bike perfectly. Together, front shifting is flawless, fast and smooth, even under pressure.

Microshift Centos 11 speed road bike group review and tech details

Microshift Centos 11 speed road bike group review and tech details

The rear derailleur mimics Shimano’s design in that it puts the cable bolt out in front of the parallelogram pivot point. This creates more leverage, which means easier shifts. This requires more cable pull, which is perhaps why the lever throws so far to get four full shifts, but it feels very light and smooth. This is made more interesting because the front derailleur’s “lever” is so short behind it’s pivot, especially compared to current Shimano and Campy designs.

It didn’t take much fiddling to get things lined up and shifting accurately, either. All of the critical parts are aluminum, and it feels very solid.

Microshift Centos 11 speed road bike group review and tech details

Microshift Centos 11 speed road bike group review and tech details

Gear steps on the 11-32 are 11/12/13/14/15/17/19/21/24/28/32. Most of the cogs are drilled out to save grams. So far, it’s performing as a cassette should, really nothing to report other than it works, runs quiet and shifts well.

First impressions are good. I’d put its performance and feel on par with similarly priced groups from the big three, which you could interpret as saying a lot, but Microshift has been making drivetrains for a long, long time. So, really, it shouldn’t come as a surprise. Without a massive weight or price argument in its favor, it may just come down to wanting to put something different on your bike. Stay tuned for a long term review later this year.

Microshift.com.tw
TayaChain.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

17 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Luiggi
Luiggi
6 years ago

Thanks for leaving some room for the smaller offerings out there. Could you guys do a similar feature with Microshift’s MTB stuff?

Ryder
6 years ago
Reply to  Luiggi

I’m also curious about Microshift MTB groupset and LTWOO one. I’m curious too about the electronic Microshift groupset anounced.

Volsung
Volsung
6 years ago

I had microshift thumbies on my first year Moonlander and once I got the tension correct I had 0 complaints. I think their mountain line would make a perfect non-flashy urban setup.

I wish the price on their stuff would come down to be a viable alternative to ordering groupsets from the UK/EU. For $100 more you can get 105 with cranks, a bottom bracket, and brakes.

Masanori
Masanori
6 years ago

Any possibilities if their 11s cassette fits to my shimano 10 speed only body on FH-7801?

Raymond
Raymond
6 years ago

Seems like a pretty good option, although it doesn’t seem to have great availability. Will be interested in reading about the ergonomics in a longer term review, especially of the unusual looking thumb button.

Brian
Brian
6 years ago

Do Taya chains shift better than Dura Ace?

blueberrypi
blueberrypi
6 years ago

brake cable pull same as Shimano?

masanori iwamoto
masanori iwamoto
6 years ago

Is the 11s cassette compatible with the shimano 10 speed only free hub?

felipe rodriguez
felipe rodriguez
6 years ago

my new shimano tiagra 4700 shifters came in 490 gr pair… and the hole parts tested here in 1136gr. a chunky rear del in 256gr….

felipe rodriguez
felipe rodriguez
6 years ago

what’s the weight of the hole bike?

John
John
6 years ago

I’ve been running the Arsis hidden cable 11 speed system on my Lynskey for a few months now and really like it. It’s basically the same system with some carbon components for a little weight savings. I’ve never had a miss shift with the system and with the throw of the levers I find I can go from one gear to two gear changes on the same throw with just a slight adjustment as I feel out the gradient change. I’ve got mine mounted to Zipp SL80 bars and can reach everything perfectly from the drops or from the hoods. It’s more mechanical feeling than shimano and Sram, but is much more repeatable in shifting performance due to operator error. I simply can’t make it miss shift.

Dinesh
Dinesh
6 years ago
Reply to  John

HI John, how do you feel it compares to campag/ sram/ shimano? and what does it sound like? do you think arsis is as good as dura ace?

Hussam Almulhim
6 years ago

I have been using Microshift for more than 6 years! I have used the R8, and R10, and Centos 10, now they moved Centos with 105 to become 11 speeds!, I got to test it too!

John
John
6 years ago

Dinesh, I think it outshifts Sram and is compareable to Campy or Shimano. It’s not duraace slick, but it’s rock solid and repeatable. The only system I like more is a DI2. For a cheap mechanical system it’s fantastic. Put it this way.. I scored a cheap Ultegra system locally instead of ordering another Arsis for a trainer bike build and regret not building with the Arsis again. The hood shape is just right for my hands. I see the mini groupset Arsis 11 speed pop up on Ebay for $279 all the time and Centos for under $239.

Dinesh
Dinesh
6 years ago
Reply to  John

Thanks John. I’m thinking of sticking with 10 speed for the moment and I see there is actually a 10 speed Centos with the thumb shifters, I might give that a go.

Ingram
Ingram
6 years ago

Hi, John: I just bought a set of Centos 10s shifters(compatible with pre-11s Shimano RD). I find something not quite right about tbe left shifter – the shift paddle is too close to the brake lever so as to touch the lever’s inner face instead of the plastic bumper. During use the paddle will tap on brake lever and make an annoying sound. Right shifter is fine. Do your shifters have the same problem?

Ingram
Ingram
6 years ago
Reply to  Ingram

Well, I’ve got the reply from Microshift saying it’s normal for the paddle to touch brake lever. I will put some tapes on the contact point, so it’s not a deal-breaker for me. Overall the shifters seem well made and robust, and have the affirmative shifting feedback which I like.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.