Home > Bike Types > Road Bike

BFS2017: New all road endurance Soma Fog Cutter, plus off-road tour Wolverine update

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Sometime it takes looking around the streets of Berlin to get a closer look at a bike that we really had only seen as a prototype from a US-based company. That was a bit of the case with one new and one recent Soma frameset, each of which we encountered while riding around on the gravel & cobbles north of the German capital over the weekend. Then when we came back into the city for the Berlin Bike Show we got an up close look at both bikes, all cleaned up. The first one above is Soma’s new Fog Cutter. The steel-framed, disc brake bike is the latest generation of Soma’s long-running concept of a large volume road bike capable of all day rides, with a bit of speed and thirst for adventure thrown in for good measure. Then after the break we get a glimpse of the off-road touring Wolverine that took their super popular Double Cross and popped some even wider tires inside for truly limitless adventure…

Fog Cutter

Getting it’s seattube design from the Pigeon Point Lighthouse southwest of Soma’s Bay Area, CA home, the Fog Cutter is in essence a simple disc brake update to Soma’s sport/endurance ES road bike with its typically 73° headtube & 73.5° seattube. But since disc brakes freed up space around the old brake caliper, Soma decided to add a bit more tire clearance and ended up growing the chainstay length by 6mm to 424mm to make more room. That means that the bike will fit up to 42mm (or 47mm tires on a 650b wheelset) or 38mm tires with fenders so it needed a new fork too. That comes by way of a straight blade carbon fork with a straight 1.125″ alloy steerer from tubing maker Tange, but goes with a cross standard 395mm axle-crown opening up the possibility to use other forks.

Soma has designed the bike to be their ideal gran fondo bike, with enough flexibility built-in for credit card touring as well.

 

The Fog Cutter frame gets built from a full heat-treated chromoly Tange Prestige steel tubeset, double-butted on the main triangle and single-butted on the stays. Disc mounts stick with the IS standard, and while intended for 160mm rotors, can be adapted down to 140mm.

The frameset is designed to work with full coverage fenders front & rear, but also builds in rack mounts in the back if you want to carry some heavy loads out on an adventure.

The Fog Cutter sticks with a standard BB and round seattube, so it can get most any drivetrain setup you can think of. This bike goes the simplest 1x route, but since it is sold as a frameset, it is really up to your imagination. The frame itself can max out with a standard road double 53/39 with a 48.5mm chainline or a max 52/39/30 touring triple and a 45mm chainline.

The Fog Cutter sells separately in seven sizes from 48-66cm for the $490 frame & $250 fork, both in matching deep, dark Rosso Red. Frame weight for a 58cm is claimed at 1925g/4.25lb for the smallest, or 2040g/4.5lb for a 58cm, and pairs with the 775g fork. While details rolled out last summer, it has just recently become available to buy.

Wolverine

In fact the Wolverine isn’t really even remotely new, but we kinda couldn’t resist, since we hadn’t taken a look at the bike in a couple of years since it was a prototype. Even though this bike started out as a Monstercross on their drawing board, it has really evolved into more of an all-around off-road touring machine. And with a good bit of flexibility and thru-axle compatibility built-in, this bike still can hold its own with most of the newer, more-expensive crop of off-road adventure bikes.

With a quality chromoly steel frame with a heat-treated Tange Prestige front triangle and a matching flat-crown, lugged Tange Infinity fork, the Wolverine is a mix of durability and that comfortable steel ride quality everyone is talking about. Key to the Wolverine is flexibility. The bike gets a nice set of IRD/Tange slider dropouts and a seatstay break that means you can set it up as anything from a single speed, to a belt-drive internal gear hub setup, or pop on a slider with a hanger for a traditional derailleur drivetrain. You can even swap in thru-axle slider drops in the back if you so desire, and since the fork is sold separately you can pick this lugged version, or get a matching orange unicrown fork that has a 15mm thru-axle (and typical rack & fender mounts).

A whole host of braze-ons mean you get full front & rear rack and fender compatibility, down-tube shift bosses, full external housing for the disc brakes. The lugged fork even adds both double eyelets for a standard pannier rack and mini rack mounting points. Both frame and fork are designed to clear a 45mm tire with fenders, or about a 50mm tire without. This bike was setup with Soma’s own Japanese-made 42mm skin wall Cazadero fast-rolling, meaty shouldered tires.

The $530 Wolverine frame comes in a wide size range from 50-66cm and this orange or a black. It claims a small size weight of 2170g/4.79lb for the frame & 1040g/2.3lb for the fork. Adding on the lugged fork will cost another $126, while the thru-axle unicrown version sells for $220.

SomaFab.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mik99
Mik99
7 years ago

The Handlebar Angle just looks wrong

Kernel Flickitov
Kernel Flickitov
7 years ago
Reply to  Mik99

Correct! It ain’t your bike.

mudrock
mudrock
7 years ago

I know that Soma’s roots and aesthetic has always called for flat top tubes on the road models, but that Wolverine calls out for a taller head tube and more crotch clearance. If the Saga has a slanted top tube the Wolverine has even more reason for one, since it will see more dirt and trails.

Love the brand otherwise, the Rush was my favorite bike for years.

Maus Haus
Maus Haus
7 years ago

Love my soma bside. On my second one now. Waiting for a 29/27+ specific frame to get my third. The prestige tubing rides amazing and brings back o’skull memories. Current set up has dura ace friction shifters and is quickly converted for bikepacking when needed.

Dinger
Dinger
7 years ago

” 775g fork”
This is a carbon disc road fork. Is that a typo?

Volsung
Volsung
7 years ago
Reply to  Dinger

It could have an aluminum steer tube. Those often add a lot of weight while still being called carbon

mudrock
mudrock
7 years ago
Reply to  Dinger

Al steer tube, typically 200g more than all carbon.

lop
lop
7 years ago

Yeah, it’s “carbon/aluminum”, which basically means 90% aluminum with some carbon blades.

At 775g, I think I’d rather it just come with a painted-to-match steel fork.

Marcus
Marcus
7 years ago

One thing that’s always driven me bonkers about Soma is their insistence on separating the frame and fork. Just raise the price and include the fork.

Vincent
Vincent
7 years ago

I’ve owned a double cross and juice, and now ride the wolverine as my daily commuter and gravel grinder. It’s an amazing bike with the ride feel of a custom built frame. Wish Soma would update the juice or release a new 29/27.5+ with progressive geometry and 30.9 seat tube w/ gates compatibility. I love the way this frames look and ride.

Maus Haus
Maus Haus
7 years ago
Reply to  Vincent

@ Vincent – Yes, a 30.9 or 31.6 post would be great… dropper compatible w/ 29/27+… sick.

Estivalia
7 years ago

I think I’m in love with the Fog Cutter. It ticks all the boxes of my ideal bike: geometry, steel, discs and wide tire clearance. It even comes in my size! (the struggle is real when you’re 5′)

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.