Home > Event Coverage > Eurobike

EB16: Birzman shows cure for the common cable crimp, new fat bike and hand pumps, bags, and more

18 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-140

Regardless of the type of bike, if it has cables it likely has one thing in common. The crimp. These tiny little aluminum caps have a simple purpose – to protect the end of the cable from fraying after it has been cut. The concept has worked for years, so why change it? As with any new concept, Birzman thinks there is a better way. Reuseable, tool free, and versatile, the Birzman Cable Cocoon may be that one bit you didn’t even know you needed…

birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-141

Compared to the standard cable crimp which is crimped onto a cable with a tool, the Cable Cocoon is a tool free cable management solution that can be installed by hand. Most mechanics have their own methods for installing and removing traditional cable crimps as efficiently as possible, but for every bike that comes into the shop missing a crimp, the Cocoon could be an interesting solution.

Other than installing without tools and being reuseable, one of the main benefits seems to be that it shortens the exposed tail of the cable considerably, but still leaves a longer section of cable to work with if you have to readjust the brake or derailleur. The design is also compatible with frayed cables meaning you won’t have to sit there and try to rebraid the exposed end of the cable to fit it inside a crimp. The dual exit holes allow it to be used inline or at 90 degrees for V-Brakes, and the clamshell design should keep it locked and in place until it’s ready to be removed. Technically, the Cable Cocoon is still a concept, but it is quite far along and could be in production very soon.

birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-137

birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-138 birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-136

Taking their Maha-Apogee MTB pump a step further, the new Maha-Apogee Fatty pump is geared specifically towards fat and plus bikes. Because of that, its gauge tops out at just 25psi offering much better resolution at lower pressures. The large diameter barrel is better for pushing larger volume and is tilted 5º towards the user for better ergonomics. The premium pump uses a varnished wood handle and their patented Apogee head which works with presta or shrader valves and sells for $80.

birzman-tools-bags-clams-eurobikeeurobike-2016-5

birzman-tools-bags-clams-eurobikeeurobike-2016-8 birzman-tools-bags-clams-eurobikeeurobike-2016-6

The Sheath Apogee is a clever little pump that combines the best of both worlds. Fully assembled, the pump is a standard road pump with a flexible hose and Snap-It Apogee head which is capable of reaching 160psi. However, if you want to speed things up, the Apogee head is removable and threads onto a standard CO2 cartridge for 2-in-1 inflation. The whole thing packs down into a jersey pocket friendly size and sells for $44.

birzman-eurobike-fat-bike-floor-pump-conceptseurobike-2016-131

A similar concept is available for mountain bikes with the Infinite-Apogee MTB with CO2. Inside the pump is a dual function chuck which can be threaded to the CO2 cartridge for flexible inflation.

birzman-tools-eurobike

birzman-tools-bags-clams-eurobikeeurobike-2016-2

Moving into their saddle bag range, the new Elements 1 and 2 offer simple, water resistant storage. Starting with their incredibly easy twist lock installation, the bags mount to your saddle rails with a simple 1/4 turn. The inside of the bag is accessed through the roll top enclosure with two elastic bands that anchor to the hooks on the side. The 0.25L 1 will sell for $27.65 while the 0.4L 2 will sell for $29.40.

birzman-tools-bags-clams-eurobikeeurobike-2016-3 birzman-tools-bags-clams-eurobikeeurobike-2016-4

For even simpler, minimalist storage, the FeexPouch can be slipped into your jersey pocket or velcroed to your saddle. The water resistant design is 0.3L in storage and sells for $21.89.

birzman-tools-bags-clams-eurobikeeurobike-2016-10

Perhaps one of the simplest tools in the Birzman line up, the Clam is a stainless steel tool for measuring and setting disc brake pad gaps. Especially for mechanical disc brakes, the Clam can be slipped over the rotor and then allow the pads to be set quickly for the novice mechanic who struggles with proper caliper and pad set up.

Stay tuned for more from Birzman – they had a few other concepts on display that were very exciting, though not quite ready for the spot light.

birzman.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

18 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
tyler
7 years ago

ziptie cable to arm. done.

DJ
DJ
7 years ago

Seat bag needs place to mount a light. I guess most Europeans don’t use the LED lights for better visibility.

Adrian Frey
7 years ago

If you do cables right, you don’t need the cocoon. Of course in the picture they’ve cut the cable too short to take advantage of the tabs on the brake to tuck the cable away, which looks way better than the loop left behind by the cocoon.

If you don’t have sidecutters to crimp the cable end, then this is useful. But I’m sure you can get a good set – and a bottle of cable ends – for $20 so there’s really no excuse.

Nelson Muntz
Nelson Muntz
7 years ago

I wish they would make a floor pump designed for gravel grinding…..or fondoing….or maybe even fonduroing

duder
duder
7 years ago
Reply to  Nelson Muntz

What features would a fonduroing pump have? A hipster beard? A video game console to keep you entertained while you plod along at a slow, steady pace on a flat, straight course?

Zed
Zed
7 years ago
Reply to  duder

A cheese melter, skewers and a control puller, of course!

Artisart
Artisart
7 years ago

I dig on the traditional cheap ends.

When I install XXI, I go full on and actually chrimp “XXI” on the end…

Do you… step up… your customer won’t notice and you’ll look dumb showing em your art… still, you’ll know.

“Art is the right making of the thing to be made.”

This new invention is stifling art….

Bikesrrad
7 years ago
Reply to  Artisart

Fully agree, cable crimps are the best place to leave your mark and let clued in bike aficionados know this bike was built with love.

KitKat
KitKat
7 years ago

I think they’ve done to many BOA reel replacements…

Scotty
Scotty
7 years ago

Doesn’t anybody solder the cables anymore?

Gef
Gef
7 years ago
Reply to  Scotty

I like to TIG the ends, faster than solder, just as clean.

Bob Rippleston
Bob Rippleston
7 years ago
Reply to  Gef

Impressive that you can TIG the cable end and not have it ball up. I’ll bet you dimes to dollars that I can use the mapp torch that sits on my bench to get the job done in 1/3 the time it takes you to set up a tig machine and do the same thing. Plus, I can pull my cable back through the lines without having to snip the tig bulb off the end.

Bikesrrad
7 years ago
Reply to  Scotty

One guy… Pretty sure he lives in Portlandia

Erik
Erik
7 years ago

Super Glue is the new solder

Milessio
Milessio
7 years ago
Reply to  Erik

or heat shrink

Groghunter
Groghunter
7 years ago

I can’t say I’d want a loop of cable hangin from my derailleur… I bash it into enough things as it is, I don’t need a loop hanging off of it that could actually catch on things.

Crimpthis
Crimpthis
7 years ago

Cable crimps look waaay cleaner. Are people just running out of new things to come up with? Trying to force feed us a new cable crimping standard….psshhhh.

Funkytown
Funkytown
7 years ago

There are no bad ideas. Some are just better than others. This crimp thing isn’t one of them.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.