Home > Bike Types > Gravel Bikes

Review: Bulls Bikes Grinder 1 Gravel Bike – Newcomer to the USA

13 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

BullsGrinder1Review2016-1

Bulls Bikes is a brand that may be unfamiliar to cyclists in the USA, but to Germany and the European market, the company has been around since 1994. The company is best known for quality road and mountain bikes at affordable prices. Zach captured details of the company’s top end Wild Edge full-suspension MTB at Sea Otter 2015, during the company’s initial foray into the USA market.

Since that time, Bulls Bikes has gradually increased their range of product available to the USA market, and now offers two gravel bikes – Grinder 1 and Grinder 2. Both bikes feature the same 7005 series aluminum, double butted frameset. Differentiating them are their paint liveries and respective groupsets; Shimano’s Ultegra mechanical / hydraulic brake groupset on the Grinder 2, and Shimano’s 105 mechanical / hydraulic brake 11-speed groupset on the Grinder 1. Bulls Bikes sent us a Grinder 1 to review, click on through to see how it fared…

BullsGrinder1Review2016-20

I have a preference for a more aggressive fit. That means, I typically choose the smallest bike I can get away with, and use a setback seatpost and longer stem to attain my ideal position. Clearly this isn’t for everyone, or the internet bike fitters who frequent BikeRumor 🙂 The seatpost supplied with the Bulls Grinder 1 isn’t of the setback type, and while it was on the limit of horizontal setback with my personal Arione saddle, it got the job done.

BullsGrinder1Review2016-5

The Grinder 1 is available in five sizes, with effective top tube length starting at 53.6cm and ending at 60.4cm. Standing at 5’11” with an 32″ inseam, I fall between the size 49 (53.5cm top tube) and 52cm (55.2cm top tube).

BullsGrinder1Review2016-7

The deciding factor was the shorter head tube of the size 49, which measures 135mm in length. Incidentally, the Bulls Bike website “What is my frame size” selector insisted I choose the size 52 (55.2cm top tube). Sometimes you have to cut the bull and break the rules…

BullsGrinder1Review2016-8

The Bulls Bikes Grinder 1 complete bike is equipped with Shimano’s workhorse 105 11-speed mechanical groupset and their latest ST-RS505 hydraulic shifter / brake levers and BR-RS505 hydraulic brakes.

BullsGrinder1Review2016-3

The distinctive shape of Shimano’s 105 RS505 shifter levers are immediately noticeable. They are quite bulbous compared to the RS685 Ultegra hydraulic brake levers, but the hood shape proved to be very comfortable.

BullsGrinder1Review2016-21

Don’t expect Ultegra level performance from the 105 build kit. Shifting doesn’t feel as crisp and is a little vague feeling versus a comparable Ultegra drivetrain, but the lower end 105 group stayed in adjustment for the duration of the review and fired off reliable gear shifts time after time.

BullsGrinder1Review2016-15

Finishing out the build are Bulls branded cockpit parts (I substituted the supplied 90mm long Bulls stem for a 110mm Zipp stem for the review) and WTB XC-21D disc brake rims / Formula hubs fitted with Maxxis Rambler 700c x 40mm 60tpi gravel specific tires.

BullsGrinder1Review2016-16

Topping off the Grinder 1 is an attractive dark blue paint finish with subtle branding and white panel with contrasting blue accents. The flattened top tube of the Grinder 1 is noticeable in the above photo, and would come in handy for those moments when you need to shoulder the bike. Welds on the Grinder 1’s 7005 series aluminum frame are clean and weight has been shed where possible.

BullsGrinder1Review2016-19

At about 155lbs, I am not a powerhouse rider, but the oversized pressfit bottom bracket junction refused to creak, groan or flex during repeated out of the saddle efforts. There is plenty of tire clearance between the chainstays with a 700c x 40mm wide tire mounted.

BullsGrinder1Review2016-14

With tire pressure inflated between 35psi and 40psi, the Grinder 1 provided a very comfortable and pleasant ride across every road surface. One of my review rides included 125 miles of solo fun aboard this bike. I finished the ride tired, but it wasn’t due to a beatdown from the aluminum frameset. Adding to the flexibility of the Grinder 1, the flattened seat stays (they taper towards the seat tube junction) are fitted with convenient built-in rack mounts – the Grinder 1 easily doubles as a sweet commuter bike.

BullsGrinder1Review2016-9

The Bulls branded WTB XC-21D rims / Formula hubs are laced with 32 spokes and shod with the excellent Maxxis Rambler tire. You can read a full review of the 120tpi version of the Maxxis Rambler over at Gravel Cyclist.

BullsGrinder1Review2016-2

Bulls fit the Grinder 1’s wheels with the 60tpi version of the Rambler, which feature Maxxis’ Silk Shield puncture protection technology. While a little heavy, the provided wheels rolled nicely once up to speed and stayed true for the duration of the review. Converting the wheels to tubeless is a cheap and easy way of dropping some weight, and the addition of sealant provides a certain measure of puncture protection. Ideally, a lighter set of wheels would drop a nice chunk of weight from the bike, but for the asking price of this bike, the wheelset and supplied tires are a great starting point.

BullsGrinder1Review2016-12

The Formula hubs utilize Shimano’s center lock standard for rotor installation, and are fitted with the company’s excellent Icetech brake rotors in 160mm. Note the flat-mount disc brake and discreet mounting points for rack or fenders located just above the rear dropout.

BullsGrinder1Review2016-11

Front and rear, Shimano’s excellent flat-mount BR-RS505 hydraulic brake calipers provide all of the stopping power you will ever need. Unlike the electronic Di2 version of Shimano’s hydraulic brake levers, the 105 and Ultegra mechanical shift / hydraulic brake levers have superb brake feel. There is no vague feeling of brake “hyperspace” as the lever travels at least a centimeter before the pads are engaged. Pad engagement is almost instant on the mechanical shifting levers, but offers plenty of modulation and control, with power increasing as you pull harder on the lever. One finger braking is a delight with the 105 mechanical / hydraulic shifter / brake lever combination.

BullsGrinder1Review2016-10

The Bulls branded all-carbon fork with its 15mm thru axle and well-hidden fender eyelets helped smooth out the front end of the bike. However, the supplied Formula thru axle quick release is less than desirable. It lacks the smooth cam action of a Rockshox Maxle Lite, and had a tendency for the lever to flop about the place – unless the skewer is cranked down overly hard, which makes removing the front wheel a little more difficult.

BullsGrinder1Review2016-13

The brake cable for the front fork is routed externally and in front of the fork leg. While this makes for a clean cable run, it is aesthetically displeasing when you consider how nicely every other cable on the bike is routed. This minor quibble aside, the fork performed as expected. The thru axle interface is stiff, and the fork does a nice job of soaking up plenty of the bumps you’ll encounter riding dirt and gravel roads.

BullsGrinder1Review2016-22

Another nice touch is the molded recess inside the fork leg to easily guide the front wheel into place. Without this feature, wheel swaps with a thru axle wheel can be a little tricky as you fumble to line everything up.

BullsGrinder1Review2016-17

The rear hydraulic brake housing and shift housing are discreetly routed inside the Grinder 1’s frame. While internally routed cables are never a joy to replace, the housings are shielded from the potential contamination of mud and gunk.

BullsGrinder1Review2016-18

Cable housings exit just ahead of the PF30 bottom bracket, with the rear derailleur and rear brake housing continuing their run externally and below the rear chainstays.

BullsGrinder1Review2016-4

Shimano’s 11-speed RS500 crankset is fitted with 46 / 36 chainrings, which are perfectly sized for riding miles and miles of gravel roads. Far too often I’ve seen gravel bikes specified with a 50 tooth big chainring – which is fine for those who push bigger gears – or a road bike, but with the taller tires of a gravel bike, gear ratios change. All of a sudden that 50 tooth chainring becomes a lot harder to push.

The mechanical shifting prowess demonstrated by the 105’s front derailleur is a direct result of the trickle down from Shimano’s Ultegra and Dura-Ace groups. Shifts are fast and never missed a beat, aided by well-placed shifting ramps on the big chainring.

BullsGrinder1Review2016-6

The rear derailleur spec’d is Shimano’s 11-speed 105 mid-cage unit, paired with an 11-32 105 level cassette. For extended periods of climbing, the 36 x 32 low gear works nicely, and the 46 x 11 gear is big enough for the average gravel descent. Optionally, the 36 tooth small chainring could be substituted for a 34 tooth ring for even steeper climbing.

BullsGrinder1Review2016-23

The Bulls Grinder 1 tips the scales at 20.2lbs fitted with my personal King titanium cages, Shimano XTR pedals and Fizik Arione saddle (substituted for the stock Selle Royal Seta S1 saddle). The Bull’s website lists the Grinder 1 at 20.94lbs – nice to see a bike fall beneath the listed spec weight.

BullsGrinder1Review2016-24

Priced at $US 1,799.00 for a complete bike, the Bulls Grinder 1 is a well-priced aluminum framed gravel bike perfect for blasting down your local gravel road.

Photos and article by Gravel Cyclist.
Jayson O’Mahoney is the Gravel Cyclist: A website about the Gravel Cycling Experience.

Bulls Bikes USA

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

13 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
David
David
8 years ago

That crank looks alot more like a RS500 than a 105. Definately not a 5800 105.

Jeff Welch
Jeff Welch
8 years ago

What were they thinking with the geometry? Useless for gravel riding.

TheKaiser
8 years ago
Reply to  Jeff Welch

Can you be more specific about what you would change?

Jeff Welch
Jeff Welch
8 years ago
Reply to  TheKaiser

Slightly shorter top tubes; what I am seeing here is a 49cm bike with a 53.5 top tube…who is that going to fit, yes I understand there will be a few, but not many. Anyhow my comment came from working in a shop and seeing what the majority of folks that are buying gravel bikes are looking for fit wise. I believe this discussion could go on forever based on who you were talking to, but my 2 cents is that the long TT bike is not a good choice for the gravel crowd.

Kernel Flickitov
Kernel Flickitov
8 years ago

Apparently somebody didn’t do their market research. The US is oversaturated with gravel grinders. And thankfully most manufacturers are creative enough at least to name their bike something other than “grinder”. It ain’t 2007 anymore. Maybe in the EU but not here.

Heffe
Heffe
8 years ago

This looks like a nice bike.

anonymous
anonymous
8 years ago

“53.6mm”
Bike for ants?

WannaBeSTi
WannaBeSTi
8 years ago
Reply to  anonymous

@ Anonymous,
Yes, short people ride bikes too. Not everyone is at the national average height. The 53.6TT would translate to a 52 or 53cm bike.

anonymous
anonymous
8 years ago

I have never met anyone that could ride a bike with a 53.6mm top tube

Milessio
Milessio
8 years ago
Reply to  anonymous

At 53.6mm it would need very big ants, but as it’s 53.6cm, all is well for fitting humans 🙂

anonymous
anonymous
8 years ago
Reply to  Milessio

BR is doing stealth typo fixes again. They had the measurements listed in mm before.

Jb
Jb
8 years ago

He is referring to (mm), not the actual number. I guess Zoolander references aren’t always seen as being awesome.

Pete C
Pete C
8 years ago

Why is the 160mm front mount brake adaptor fitted upside down?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.