Home > Bike Types > Commuter

NAHBS 2016 – Road, cyclocross and a do-it-all bike from TripleThreeFab, Caylor & DeSalvo

1 Comment
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

triplethreefab-sram-etap-road-bike-nahbs-2016-01

TripleThreeFab hails from Seattle, Washington, and builds in steel (regular and stainless) and titanium. For the show, they brought an eTAP-ready road bike (front in pic above), another road bike with sparkly paint, a cross bike and the builder’s own do anything, go anywhere mountain bike/commuter.

The eTAP bike gets no shift ports or guides for a streamlined look, which is accentuated by its shapely stays. Check ’em out and more from Caylor and DeSalvo, below…

triplethreefab-sram-etap-road-bike-nahbs-2016-02

The ends of the seatstays come to a point, which is mirrored on the chainstays, you just can’t tell until you get on top of them.

triplethreefab-sram-etap-road-bike-nahbs-2016-04

The dropouts are cut into the outer edge of the ends for the chainstay, which gives it a unique look.

triplethreefab-sparkly-paint-road-bike-nahbs-2016-02

The sparkly road bike was painted by Spectrum.

triplethreefab-cyclocross-bike-nahbs-2016-01

Cross bike gets Syntace dropouts and is built with SRAM Force 1 with AbsoluteBLACK oval chainring.

triplethreefab-cyclocross-bike-nahbs-2016-02

triplethreefab-commuter-mountain-bike-nahbs-2016-01

This “commuter” is 333fab builder Max Kullaway’s personal bike and could be anything from mountain to cyclocross but is currently set up to be his dream commuter bike.

triplethreefab-commuter-mountain-bike-nahbs-2016-03

The Paragon dropouts were attached to a round tube that let him weld it on Breezer style instead of cutting a slot into the chainstay (Like what they did with the eTAP bike. Click to enlarge).

DESALVO

desalvo-os-road-titanium-bike-nahbs-2016-01

DeSalvo’s bikes maintain their classic aesthetic, but get some modern updates. This OS Road Titanium gets larger 1-3/4″ diameter butted downtube, a 44mm headtube and oversized straight gauge top tube. Connecting all that to the rear is a butted seat tube and larger T47 bottom bracket shell.

desalvo-os-road-titanium-bike-nahbs-2016-03

$3,150 custom, or $3,650 with ENVE fork and CK headset

desalvo-builders-special-steel-road-bike-nahbs-2016-01

The Builder’s Special is a stock sized road bike offering in steel that’s just $3,650 complete with Ultegra, Ritchey and Rolf Prima parts.

desalvo-builders-special-steel-road-bike-nahbs-2016-02

desalvo-builders-special-steel-road-bike-nahbs-2016-03

DeSalvo also does a lot of lugged frames, but this year’s collection was heavier on the welded ones. This bike does show a lugged crown fork, and with the fatter gumwall tires could be inching close to a “gravel grinder” for him.

CAYLOR

caylor-cycles-steel-road-bike-nahbs-2016-01

Gunnar Caylor’s been building frames for something like 40 years!

caylor-cycles-steel-road-bike-nahbs-2016-03

This track bike puts the fork crown low, with a notch to clear the tire. The seatstays blend into a seat collar lug and run the bolt through the tops of the stays to clamp the post.

caylor-cycles-steel-road-bike-nahbs-2016-04

caylor-cycles-steel-gravel-bike-nahbs-2016-01

While Caylor focuses on a classic aesthetic, he’s offering modern options like disc brakes.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
PsiSquared
PsiSquared
8 years ago

The Ti DeSalvo is drool worthy.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.