Home > Bike Types > Gravel Bikes

NAHBS 2016 – Rob English’s bikes blow minds on road, gravel, dirt and city

39 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Rob-English-Cycles-gravel-road-bike-best-road-bike01
Perhaps its fitting that this year’s Best Road Bike award went to a gravel bike. There’s simply no denying the category’s growth, with most builders not only showing one or more models but also saying that a significant chunk of customer bikes going out the door are designed for riding the rough stuff.Rob English is known not just for making some very light bikes out of steel, but also for making some very interesting frames, too. The bike above may look normal, but it’s got a few treats worth seeing. And the rest of his bikes just keep turning things up, notch after notch…

Rob-English-Cycles-gravel-road-bike-best-road-bike05
A carbon fiber headtube gets sleeved inside a custom cut steel tube. Note the extremely clean cable entry for the rear brake and the molded one-piece bar and stem. This one’s his own Gravel Race Bike and is made specifically for SRAM eTAP.

Rob-English-Cycles-gravel-road-bike-best-road-bike04
A bent seat tube lets the larger 700×35 tires tuck in tight, and thin seatstays smooth the ride.

Rob-English-Cycles-gravel-road-bike-best-road-bike13
There’s ample clearance top and bottom, leaving room for fenders. But where are the mounts?

Rob-English-Cycles-gravel-road-bike-best-road-bike11
Oh, there they are! Note the tiny holes on the seat tube, seatstay bridge and rear dropout. Remove the plug screws and you’ve got threaded fender mounts that are all but invisible when not in use.

Rob-English-Cycles-gravel-road-bike-best-road-bike03
No wire or cable holes, stops or guides continue the ultra tidy appearance.

Rob-English-Cycles-gravel-road-bike-best-road-bike08
Thru axles and flat mount disc brake front and rear.

Rob-English-Cycles-gravel-road-bike-best-road-bike12

Rob-English-Cycles-gravel-road-bike-best-road-bike15

Rob-English-Cycles-campagnolo-contest-road-bike01
Over in Campagnolo’s booth was this entry for Best Campy Bike.

Rob-English-Cycles-campagnolo-contest-road-bike02
Maybe it didn’t win because of the chain? Maybe, but worth it.

Rob-English-Cycles-campagnolo-contest-road-bike03

Rob-English-Cycles-campagnolo-contest-road-bike06

Rob-English-Cycles-Obree-tribute-hour-record-bike01
This Obree Tribute bike is made for one thing: Speed.

Rob-English-Cycles-Obree-tribute-hour-record-bike02
It may look odd, but it’s designed to get the rider in a very specific position. It also shows off the amazingly detailed, thoughtful work coming from English.

Rob-English-Cycles-Obree-tribute-hour-record-bike03

Rob-English-Cycles-Obree-tribute-hour-record-bike04
The bolts are to hold the eccentric BB in place, allowing for chain tension adjustments since the dropouts don’t:

Rob-English-Cycles-Obree-tribute-hour-record-bike05

Rob-English-Cycles-Obree-tribute-hour-record-bike06

Rob-English-Cycles-triathlon-travel-bike01
His Travel Triathlon Bike reduces the headaches of traveling with a tri bike by making it fit inside a large suitcase.

Rob-English-Cycles-triathlon-travel-bike05
Detach the seat stays from the seat tube and the rear end folds and pivots up against the bike…

Rob-English-Cycles-triathlon-travel-bike06
…rotating around the bottom bracket shell.

Rob-English-Cycles-triathlon-travel-bike07

Rob-English-Cycles-stainless-steel-superlight-road-bike01
The Stainless Ultralight comes in at just 9.9lbs with this build, which is admittedly over the top. The pedals are no longer available, and, like many of the bikes shown here, is for Rob himself. Being a smaller guy, he can get away with a lot, but it’s 100% rideable.

Rob-English-Cycles-stainless-steel-superlight-road-bike06
The cable stops are removable, so it’s eTAP ready.

Rob-English-Cycles-stainless-steel-superlight-road-bike07

Rob-English-Cycles-stainless-steel-superlight-road-bike05

Rob-English-Cycles-stainless-steel-superlight-road-bike02

Rob-English-Cycles-stainless-steel-superlight-road-bike03

Rob-English-Cycles-Right-29er-mountain-bike12
The Right 29 is a single-sided bike that puts everything on the driveside. A singlespeed, belt drive setup keeps it simple, and it is indeed a very simple bike, which makes it all the more amazing.

Rob-English-Cycles-Right-29er-mountain-bike10

Rob-English-Cycles-Right-29er-mountain-bike07
The front brake hose enters through the stem and pops out of the fork leg, completely hidden from view.. The rear brake enters just behind the head tube and runs all the way back to the caliper inside the frame.

Rob-English-Cycles-Right-29er-mountain-bike06
The hubs are custom for English.

Rob-English-Cycles-Right-29er-mountain-bike08
An eccentric BB gets the belt’s tension set.

Rob-English-Cycles-Right-29er-mountain-bike01

Rob-English-Cycles-Right-29er-mountain-bike13

Rob-English-Cycles-integrated-commuter-special-bike01
This electric blue commuter bike had the most amazing, deep blue with just the right amount of metallic.

Rob-English-Cycles-integrated-commuter-special-bike02

Rob-English-Cycles-integrated-commuter-special-bike05
Note the front fender mount under the fork’s crown.

Rob-English-Cycles-integrated-commuter-special-bike03

EnglishCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

39 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
bendehos
8 years ago

nope

flx
flx
8 years ago

Is it just me or does anyone else has problems with the pics? They don’t load at my end.

Rowan
Rowan
8 years ago

Pictures are not working, please fix this. Love seeing his work.

wallymann
wallymann
8 years ago

pictures no worky for me, either.

Brian S
Brian S
8 years ago

Nice photography work 😉

Ryan S
Ryan S
8 years ago

That single sided belt 29 is almost my personal “dream” bike, as in the one I have often thought about building…if I was a builder. Mentally, however, I would need the front a rear “sides” to be opposite of one another in order to feel balanced.

Champs
Champs
8 years ago

I left this tab open. Well worth the wait!

Cody leuck
Cody leuck
8 years ago

Does anyone know what kind of cable housing is on the 9.9lb bike? It wasn’t Nokon, I didn’t get a chance to as Rob.

Tyler Durden
Tyler Durden
8 years ago

God Rob is such a boss. I live two miles from the guy… this makes me want to head over there and order a bike.

Chris
Chris
8 years ago

So good to see him back and building after his accident. That gravel bike is my dream bike though maybe without nearly so much drop from seat to bars.

satisFACTORYrider
satisFACTORYrider
8 years ago

beautiful work.

dFOX
dFOX
8 years ago

wait sram etap with disc brakes?!?! that is sweet!!! didn’t know that was possible.

Mick
Mick
8 years ago
Reply to  dFOX

TRP Spyre…mechanical disc

Jason
Jason
8 years ago

The fender mounting is clean, but IMO it would have been cooler if he used the same attachment system as the Enve fork.

sanrensho
sanrensho
8 years ago

Does anyone know the frame/fork weight on the Stainless Ultralight?

Greg
Greg
8 years ago

Hells yeah

Ol'shel'
Ol'shel'
8 years ago

Rob needs to take some engineering classes.

PsiSquared
PsiSquared
8 years ago
Reply to  Ol'shel'

Obviously Rob English must have thought the same thing, else why would he have have got a masters in mechanical engineering from Cambridge University?

JasonK
JasonK
8 years ago
Reply to  Ol'shel'

Wow. Just wow. Your posts have been smug and uninformed before, but this one tops them all.

FWIW, I’m also a mechanical engineer, and Rob English’s work involves a lot more actual engineering than most NAHBS entries. Most of those involve a great deal of skill, but few approach English’s thoughtful engagement with design.

JasonK
JasonK
8 years ago
Reply to  Ol'shel'

My previous comment was deleted, probably because I said some unkind things about the OP.

But the thrust of my comment still stands: while most NAHBS entries are exquisitely crafted, Rob English’s bikes exhibit this craftsmanship *and* manifest his (degreed) engineering skills in a creative and deeply design-focused manner.

jlg
jlg
8 years ago
Reply to  Ol'shel'

What do you mean ?
He’s study Mechanical Engineering at university and start at Bike Friday in Oregon as their engineer and production manager.

jlg
jlg
8 years ago
Reply to  jlg

Sorry, i forgot to refresh the page since yesterday and i was responding to Ol’shel’

Patrick
Patrick
8 years ago

I am in love….

Dude
Dude
8 years ago

Rob IS an engineer. Mechanical. With the degrees and work history to prove it. Which is why his designs push the performance function of his bikes way beyond what other “artisan” types can manage. Stripped of paint, most NAHBS bikes would be boring, unimpressive in innovativeness, functionally identical, and the only thing making them better than an off the shelf frame is custom geometry and everyone’s doing pretty lug work. Rob actually thinks through every detail from a high performance perspective and doesn’t let tradition hold him back. The core value proposition of like 90% of NAHBS bikes is “made by hand in the USA”, Rob’s is “works better”.

Craig
Craig
8 years ago
Reply to  Dude

@Dude, I like your comment….The core value proposition of like 90% of NAHBS bikes is “made by hand in the USA”, Rob’s is “works better”.

Robert Underwood
8 years ago

Easily the best builder around.. A clone of that Gravel Bike is on my to get list.

David
David
8 years ago

Don’t understand how Rob English doesn’t win all the NAHBS awards, all the time.

Matt
Matt
8 years ago
Reply to  David

I agree.

Lumpa Lumpa
Lumpa Lumpa
8 years ago

Great job, great spirit and more…. Great English looking !!! 😉

matt
matt
8 years ago

I’d imagine that these bikes aren’t inexpensive, but I can see them all having buyers… except the O’Bree bike. It’s cool but seems like a complete waste of time and material. When would anyone use that? Glad he has the time to spend on such endeavors.

PFS
PFS
8 years ago
Reply to  matt

I’m glad he has time too. Everyone deserves to have some downtime. That is what the weekends are for! It would appear that his favorite hobby is also making bikes…

Huffytoss
Huffytoss
8 years ago
Reply to  PFS

Obree set the hour record with that position before it was banned. Then he did it again with the Superman position which also got banned.

Mick
Mick
8 years ago
Reply to  matt

The Obree tribute is his own personal project.
There will always be people who question it, when they don’t get it…

Tom
Tom
8 years ago

for some reason, his work leaves me cold. Undoubtedly well constructed, but much of it seems over the top in details or novelty, the result being art work instead of a bike. For instance, the carbon fiber head tube – how much weight did that save? To what effect? To each his/her own…

Ryan S
Ryan S
8 years ago

The clearance on many of these gravel bikes makes me wonder if it never rains where these owners/builders ride. Dirty Kanza, Land Run, OGRE, etc. often include snapped derailleurs, immobile wheels, and rocky peanut butter mud jammed up in the stays and forks.

Adam
8 years ago

Anyone know what tires those are?

Tim G
Tim G
8 years ago
Reply to  Adam

The tires on the pink gravel bike are 700 x 35 Compass Bon Jon Pass. Tubeless!

Adam
8 years ago
Reply to  Tim G

Thanks Tim!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.