Home > Feature Stories

The Ibis Ripley Gets Even More Talented with Two Frames and New Features

16 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

New-Ripley7

Once it was released, the original Ibis Ripley has received a lot of praise for its fun, fast ride quality. As it turns out though, many of the same attributes that caused it to be adored led to riders wanting more – more tire clearance, slacker geometry, and essentially the ability to ride the Ripley beyond its original XC/Trail limits.

That’s where the new Ripley comes in. On one side you have a frame with the original geometry that has been updated with new frame features. On the other hand you have the all new Ripley LS, a longer and slacker version of the original better tuned towards more aggressive riding. Both models benefit from new cable routing, improved frame stiffness, and standards, but which Ripley takes the cake is up to you….

New Ibis Ripley LS Geometry

Given the fact that many riders were pushing the original Ripley well past its limits in Enduro type situations the addition of the LS version isn’t that surprising. The frame follows the trend of many new “trail” bikes we’ve seen with shorter travel and slacker angles. Using a 67.5º head angle compared to the original’s 69.2º, and a 15mm longer top tube, the LS geometry is perfectly suited to shorter stems and should be more stable at high speeds. If you’re a fan of the original geometry, it will still be available at least in the medium and large sizes for now. When asked about the absence of small frames we were told that Ibis simply didn’t sell enough of the original small frames to warrant making a small of the New Ripley partially due to the perception that 29ers aren’t ideal for shorter riders. Scot Nicol did point out that they are “huge believers in small Ripleys” so they hope the demand dictates the need for an additional small size in the future.

New-Ripley17

Going hand in hand with using the Ripley for more aggressive riding is the need for bigger tire clearance. Even since the Ripley was first introduced and now, tires and rims have continued to grow making the need for more clearance a must. Claiming to have room for most 2.35″ tires on their 941 (41mm wide) rims for both new Ripley Models, fatter tires caked with mud shouldn’t be an issue. The increased tire clearance is also still available with a 12×142 rear axle, though a 12×148 Boost rear end will be available in November as an option.

Port_All740

New-Ripley11 New-Ripley16

Other changes to frame spec include a switch to a threaded 73mm BSA bottom bracket instead of pressfit. Ibis cites too much variation between various press in cups as the reasoning for the change. More important is the switch to the cable port system used on the Tranny 29 and Mojo HD3. The internal cable routing allows for running nearly every combination of droppers and drivetrains as well as the new Shimano Side Swing front derailleur.

New-Ripley15 New-Ripley2

Along with updating the bike with new suspension bits from Fox like the 2016 Float DPS shock with EVOL sleeve, the actual linkage has been improved as well (again). The suspension components should add up to improved small bump compliance and better mid to end stroke for a playful ride that can be boosted off lips. On the linkage side of things the Gnar Core eccentrics have been massaged to add even more stiffness and use more material to increase the torque spec on the shaft bolts. The resulting numbers are listed at 12% stiffer at the BB even with more tire clearance and only 2g heavier. While the frame and rear swingarm use new or modified carbon molds that are only available on the New Ripley, the Gnar Cores are retrofittable to the original.

chainstay_protector

Even though it isn’t as ground breaking as new geometry or suspension performance, the addition of the new rubber molded chainstay and seatstay protection is still important. Most riders are going to try and cobble something together to protect their frame anyways, so why not integrate it into the bike and make it look good? The new protector will fit the old Riley as well and will be available for purchase in the Ibis web store.

Full-Ripley-Black Full-Ripley-Orange

The new Ripley will be available in Black or Tang with prices starting at $2900 for the frame, and $3950 for the complete bike in the Special Blend build. The first new bikes are expected to arrive at Ibis in early July while the first Ripley LS frames should be arriving in early August.

New Features:

  • Two geometry options: The nimble geometry of the original or a new school long and slack version called the Ripley LS
  • Internal cable routing using our flexible and easy to setup port system
  • Increased tire clearance
  • Threaded bottom bracket
  • Seat mast lowered by 1/2” to accommodate today’s longer droppers
  • Choice of Boost 148 (staring in November ’15) or 142mm x 12mm Shimano through axle (now)
  • Stiffer eccentric cores
  • New rubber molded chainstay and seatstay protection
  • Two new colors (let’s call them “Tang” and “Black”)

Additional Features:

  • 120mm rear wheel dw-link travel
  • Carbon fiber monocoque frame and swingarm
  • 5.5 Pound frame* with Fox FLOAT DPS EVOL
  • Approved for 120-140mm forks, 51mm rake is STRONGLY recommended
  • Tapered head tube (suitable for various Cane Creeks & Chris King InSet 3)
  • Shock Specs: Fox Factory FLOAT DPS 3pos w/Adj and EVOL Sleeve with Kashima Coat 184mm x 44mm
  • Provision for internal cable-actuated or hydraulic adjustable seat posts
  • Post mount rear brake mounts
  • Shimano side swing front derailleur compatible.
  • * Frame weight is for a medium black with shock but without seat collar, rear axle, or water bottle bolts

ibiscycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

16 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
WV Cycling
8 years ago

Being 5’6″ and primarily a road rider, I have a hard time appreciating slack geometry on a mountain bike. Maybe it was my upbringing with more aggressive geometry?

I know the benefits, and I acknowledge them, but I’d rather have a bit shorter wheelbase, twitchier front end, and have to manhandle the bike a bit more.

woodthegreat
woodthegreat
8 years ago

NO SIZE SMALL!

D:

Now I’m thankful for that Pivot Mach 429 Trail.

satisFACTORYrider
satisFACTORYrider
8 years ago

@wv – point it down steeper lines

JBikes
JBikes
8 years ago

I’ll be honest and say I really don’t know what endure riding is compared to trail. Yeah, I can google some videos, but all those are of insane riding off huge lips, etc. No trail around me (and I live in CO) offers what I know to be “enduro” unless you ride the lifts, maybe?
If fact, most professional XC races have harder rock sections and lines than the majority of trails out there.

mateo
mateo
8 years ago

What is the word on 27.5+ capability with the Boost 148 rear end?

Sevo
Sevo
8 years ago

+1 on knowing the 27.5+ capability. If this rig can fit the Panaracer Fat-B-Nimble in the rear this will be one fun bike.

SNIPE-HUNTER
8 years ago

Looks nothing like a tall-boy 😉

Ilikeicedtea
Ilikeicedtea
8 years ago

@WV

It’s funny that you would term a steep had angle as “aggressive” on a mtb, as it seems like the the more legitimately aggressive one rides off road, the slacker one wants their head angle.

YMMV

an_687
an_687
8 years ago

One you go slack, you don’t go back.

an_687
an_687
8 years ago

*once

Vincent R
Vincent R
8 years ago

Very nice !
The reach is still a bit on the short side for the XL, but i really like it…

Padrote
Padrote
8 years ago

67.5 head tube angle is probably rad if you like going downhill in a straight line all day. I don’t.

Dan
Dan
8 years ago

@Padrote – Have you not tried going downhill in a straight line all day!? #OnlyWayToRide

elvis
elvis
8 years ago

@padrote – not sure if ya noticed but there are two frames on this single post. One at 69 one at 67.5. crazy huh? hard to keep all of that information straight apparently.

Padrote
Padrote
8 years ago

elvis yeah! you make one that will handle well and one that won’t. the point is people want dumb things. the internet and all their bros tell them that slacker = better.

AbelF
AbelF
8 years ago

“Other changes to frame spec include a switch to a threaded 73mm BSA bottom bracket..”
Holy effin’ YEAH!!!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.