Home > Bike Types > Cyclocross

BMC SLR03 Gets Affordable, GF02 Goes Carbon & New CX01 Cyclocross Bike Jumps In

14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2015-BMC-teammachine-slr03-road-bike

In addition to the new Speedfox mountain bikes, BMC has just unveiled three new skinny tired bikes. There’s something for every budget and style, whether it’s cyclocross, adventure riding or just good ol’ fashioned road riding.

For pure pavement, there’s the new entry level (but still carbon) Teammachine SLR03, an affordable way to get the Swiss brand’s racy road bike in a very upgrade worthy package. Three builds will be offered, all on the same 1230g carbon frame (size 54, with hardware). Overall, it’s very similar to the higher end SLR02, but adds an even smaller size 47 to the mix to fit more riders than ever…

2015-BMC-teammachine-slr03-105-road-bike

The key difference is in the layup, which results in heavier bikes as you move up the price range:

  • SLR01: frame 790g / frameset 1,360g
  • SLR02: frame 970g / frameset 1,530g
  • SLR03: frame 1,230g / frameset 1,860g

Even at the bottom, though, you’re still getting their TCC (Tuned Compliance Concept) layup and design, which helps smooth the ride and soak up vibrations. It’s even UCI approved should you get into it enough to start racing.

2015-BMC-teammachine-slr03-road-bike-geometry

It’s available in five sizes (47, 51, 54, 57 and 60cm) with the new smallest 47cm size aimed at riders below 164cm tall. The 47cm frame is actually about 30mm shorter than the SLR02’s 48cm size.

2015-BMC-teammachine-slr03-tiagra-road-bike 2015-BMC-teammachine-slr03-sora-road-bike

Further up is the Shimano 105 build. Directly above is the Tiagra (left) and Sora (right) bikes. Pricing TBD.

2015 BMC CROSSMACHINE CX01

2015-BMC-Crossmachine-CX01-carbon-cyclocross-bike

After taking a break from offering a cyclocross bike, BMC returns with the Crossmachine CX01, bringing with it all the frame tech they developed for the GF01 endurance road bike.

The CX01 blends their oversized lower half with wispy seatstays and cyclocross geometry to help riders lay down the power without getting beat up over the rough grass patches. It also borrows the layup tech from their SLR road bikes to bring the frame in at just 1,100g (size 54) with all hardware. It’s disc brake only, designed specifically for 140mm rotors on the frame. The fork will handle up to 160mm, but the bikes will be spec’d with 140s all around. Those mini rotors will be grabbed by the new SRAM Force CX1 Hydro group, which means a 1×11 drivetrain. (Editor’s note: Actual spec is the all new FORCE CX-1 Hyrdo lever. This group was not available at the time that BMC took the photos, they had to substitute to get photos out with the release of the bike.) Wheels are DT Swiss R23 Spline, tires are Continental Cyclo X King 700x35c. Cockpit uses their carbon Compliancepost with BMC bar and stem, too. A Fizik Arione saddle rounds it out. Claimed bike weight is 7.7kg (16.98 lb).

2015-BMC-Crossmachine-CX01-carbon-cyclocross-bike

The frameset, which includes the hardware, fork and seatpost, comes in at a claimed 1,540g (3.4 lb).

2015-BMC-CX01-carbon-cyclocross-bike-geometry

Five sizes will be offered when they come available later this year, hopefully just in time for ‘cross season. Unless you’re in Florida.

2015 BMC GRANFONDO GF02 CARBON

2015-BMC-granfondo-gf02-carbon-ultegra-road-bike

 

Not quite sure if you wanna ride off road or on? The Granfondo is a great bike for testing the waters on less than ideal pavement and country roads with no pavement (we reviewed the original GF01 here). Originally launched as an alloy bike beneath the top end carbon GF01, the 2015 model becomes a carbon fiber bike, too. Unfortunately, it doesn’t get a disc brake option out of the gate, you’ll have to pony up for the GFo1 Disc introduced at Eurobike last year for that.

The top model is the GF01 Ultegra, shown above.

 2015-BMC-granfondo-gf02-carbon-105-road-bike2015-BMC-granfondo-gf02-carbon-Tiagra-road-bike

Also offered are a 105 (left) and Tiagra builds. All come with their full carbon Compliancepost, which works in concert with the TCC frame and fork to improve overall comfort. It comes standard with an 18mm offset, but 3mm and 30mm offset posts are also available. More tech info on TCC is here. Frames use their DTi cable routing, which means it works with both mechanical and electronic groups even though mechanical shifting cables are run externally. All three bikes spec durable Continental Ultra Sport 700×28 tires and have an integrated chain catcher, both of which should help keep you on the road and out of the shop.

BMC-Racing.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Limba
Limba
9 years ago

That cross bike looks awesome.

William
William
9 years ago

Thanks… but No Thru-Axle… NO THANK YOU BMC!

G
G
9 years ago

The promo images on the CX01 look all types of whacky. Force build kit but with Red shifters, hydraulic brakes but with mechanical shifters, single chainring but with a left shifter.

The 2010 Cross Machine was a killer bike. I’m glad to see them back in the game. Especially since they have a sponsored pro rider.

Myke
Myke
9 years ago

Will, why do you want a thru axel on a CX or road bike?

Fleche1454
Fleche1454
9 years ago

Myke, how often do you get a flat or change a wheel? Unless you race a lot and have special race wheels the answer is likely not much and even then hardly ever in a race. Even if you did have a flat in a cross race, when you are putting down money for a bike like that you likely would have a pit bike. So in this the benefit of less brake rub under hard load, such as sprinting or a hard short climb found in cross racing, would mean the bike is stiff and not slowed down by brake rub far out weights the weight penalty of a thru axle

That said I tend to be in the camp,that would like to see thru axles on both road and cross when companies are doing those bikes with disc brakes. You already need wheels why not make the bike more future proof. Mtb has been doing very well with that when companies built routing for dropper posts not on the bike or making it easy to set up 1x in the future.

RIDE BMC
RIDE BMC
9 years ago

@G – Good eye. Unfortunately, SRAM’s CX1 group was not yet released at the time these photos were taken. BMC had to use the RED levers as a substitution. Be assured that the complete CX1 group is spec’d on the bike.

Ben
Ben
9 years ago

It is a well documented fact that every loss in a cross race over the past 11 years has been attributed to the lack of thru-axles.

CXisfun
CXisfun
9 years ago

Pricing?

Matt
Matt
9 years ago

Could never buy a bike that ugly. All the strange angles, gusseting and abruptly different tubing sizes. A seriously ugly bike.

nightfend
9 years ago

Thru axles really do help if you have hydraulic disc brakes. With quick release skewers, the chance of the disc brake rubbing a bit after re-inserting the wheel are high. Rubbing brakes, even if just a tiny bit, is annoying. Thru-axles tend to the position the wheel the same each time and this helps prevent that.

lonefrontranger
lonefrontranger
9 years ago

love that ‘cross bike – I had a BMC cross bike for a season (bought the frameset used) and it was an amazing bike to ride and handled well, however I could not make it fit me properly since I’m 5’4″ and just a bit too small for their 50/51cm size. So glad to see they’re now making their stuff available to smaller riders! Had they done this last year I might not be on a Specialized.

Darwin
Darwin
9 years ago

All these 2015 bikes showing up are making sure I’m not buying that second bike just yet. Especially since nobody wants to discount the 2014 bikes yet.

Velo
Velo
9 years ago

I love the look of the BMC’s. The CrossMachine looks awesome. I agree they should have gone to thru-axles though.

myke
myke
9 years ago

reason i asked is i get a lot of flats, a lot. if pro CX and road racers are not complain then i think we have fallen into the marketing trap.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.