Home > Feature Stories

Ibis Introduces New Ultra Wide Carbon Rims

34 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Ibis-Wide-carbon-fiber-mountain-bike-rims-wheels1There’s a new industry trend afoot that won’t send you into an apoplectic fit of new-standard-itis. It’s called wider is better and Ibis Cycles wants you do adopt it as the New Normal for a variety of compelling reasons. We’re sure having an OEM spec option for their phenomenal Mojo and Ripley mountain bikes is part of that equation, but we can’t overlook their desire to follow the tenants of the ancient mountain bike proverb – “You can’t have too much traction.”

In their pursuit of this higher commandment, they looked to their elders and discovered that in a past not long forgotten rims used to be wider. In those earliest days, the defacto rim of choice was the Araya 7x. A rim born for BMX and adapted to 26″ cruiser bikes. They were wide by modern standards (they had a 25mm internal width), but their method of construction was lacking. So early shredders soon discovered the channel section rims were neither light nor strong.

Our distant cousins known as road bikers had already discovered that a box section design offered superior ride dynamics and soon mountain bike legend Keith Bontrager was cutting down Mavic MA2 700c to OG dirt size. While this process brought lightweight rims and the benefits of lower rotational weight to the forefront of mountain biking, the rims began their lives destined for the road and were designed for racing slicks and not big knobbies. Weight being king though, mountain bikers sucked it up and pumped up their tires for the next thirty years.

Today, the proliferation of new materials promises to bring an end to years of compromise. So jump past the break to learn more about why wide rims are better….

For visual learners, Ibis has put together a great video that illustrates the benefits of ultra wide rims, but here’s the short and sweet:

    • Dramatically increased traction
    • Reduced rolling resistance
    • Less tubeless ‘burping’
    • Stiffer, stronger wheel
    • lighter than most narrow aluminum rims
    • Better braking control
    • Improved flat protection
    • More predictable feel
    • You can run a lighter tire with similar durability
    • Hookless bead rims are far stronger
    • Easy to mount tubeless with just a floor pump

Tech Break Down From Ibis:Ibis-Wide-carbon-fiber-mountain-bike-rims-wheels4

Dramatically Increased traction
Wide rims support the tire’s sidewalls better, allowing lower pressures without the tires folding over or burping. This dramatically increases stability and traction. This shows up as faster cornering and braking, better grip in all conditions. How much lower pressure can you go? In general, for a given rider, using tires you’ve used before in a given locale, you will be able to run lower tire pressures with wider rims. How much lower can only be determined through experimentation. Typically, riders are running 4–6 psi less than normal. Light riders on moderate terrain are running as low as 15-17psi.

Tires: Go Big, Go Small
Big – If gravity is your thing, bigger tires and lower pressures equal more traction. The problem is, you can only go so low with large tires on narrow rims before they become unstable. Enter the wide rim. Select the pressure you want without having to over pressurize the tire to control stability and burping.

Not-so-big – If you’re leaning more toward XC use, you can actually go down one tire size and achieve the same or higher levels of traction and performance, only at a reduced overall weight.

Less Tubeless Burping 
Wider rims dramatically reduce the incidence of burping. With wider rims the tire sidewall can’t exert as much force on the bead to unseat it and allow air to escape.

Low Pressures Equal Low Rolling Resistance
Anyone who wants to ride really fast off-road needs to decrease tyre pressure. The rougher the ground, the more pronounced the effect. Traction and comfort increase too,” said Peter Nilges, Editor, Bike Magazine (Germany) Our wide rim profiles provide better sidewall support, allowing you to run lower pressures with no ill effects. More from Peter’s university thesis: “Any such unevenness means that part of the forward propulsion force is required to lift machine and rider upwards. This is equivalent to riding a short uphill grade that requires a certain amount of lifting energy. A tyre with less inflation can adapt to unevenness more easily. The total system needs to be lifted to a lesser degree and less frequently. Resistance is reduced, less power is required.” Read the great article here

Hookless Bead Rims are Far Stronger
Impact damage is the way most carbon rims die. The rim we’ve designed is much stronger in the area where impacts occur since it’s a solid rectangle instead of an inverted “J”. This spreads the impact out over a larger area that is also supported by more material. We tested the impact strength of several major brands of carbon fiber rims and discovered that the change to hookless bead was a major advantage in impact strength. We also optimized the layup to further increase strength. In the end, our rims are 50 to 300% stronger in impact than competing rims we measured. We don’t want to throw anyone under the bus, but we do want you to know that these are well-respected and well-known manufacturers.

Stiffer and Lighter
The switch to carbon fiber as a rim material has allowed us to build a 475 gram 41 mm wide rim, which is lighter than the much smaller and weaker alloy rims it replaces. The 928 is 100g lighter and several times stronger than alloy rims of the same size.

More Predictable Steering 
Without wallowing sidewalls, and with dramatic increases in rim stiffness and contact patch area, the front end of the bike feels more precise and firmly planted than it ever did before. The difference is even greater than the improvements that came from tapered steerers and through axles in recent years.

Tire Fit 
We’ve carefully sized the bead area so that it’s easy to mount and dismount most tubeless tires by hand. Many tubeless tires will inflate and seat with only a floor pump.

History Repeating Itself
Mountain bike rims were not always narrow. The venerable Araya 7X, a popular rim from the ‘80s, was labeled 26×1.75″ and had an inside width of 25mm. That gives a tire to rim inner ratio of 1.78. A 2.35 tire on a modern 19mm gives a ratio of 3.14, even higher than our 3:1 outlier number mentioned above. A 2.35 tire on our 741 rim results in 1.73:1, back to the original Araya number. Read more about the history on the story tab to the right.

What to Expect 
The 41 mm wide rims typically increase the tire width about 3 -5 mm at the widest part of the casing. The diameter stays about the same. The shape of the tread cap will be flatter as well. The 741 and 941 change the shape of the tire and you will want to select a tire that has a good profile on the wider rims. Generally we have found that tires that start with a rounder profile across the tread cap work the best.

 

The Models

Ibis-Wide-carbon-fiber-mountain-bike-rims-wheels2

Ibis will be offering three different models available in the aftermarket starting June. Each of these monstrously wide offerings will retail for a very reasonable $1,299. Which is a very reasonable price considering that the weight and that the product is backed by great customer service. Ibis-Wide-carbon-fiber-mountain-bike-rims-wheels3To give you a quick idea of the differences between models, on the left is your typical rim. Pictures in the middle is the 928, they call this the “New Normal” and it has an internal width of 22mm. This is the internal width we’ve seen many companies move towards, for example: the Stan’s Flow EX rim has an internal width of 25.5mm, while the WTB i23 has an internal width of 23mm. A few years ago, those rims where heralded for their internal widths, but companies like Syntace and Derby have pushed the outer limits of what we considered “wide.”

The new 741 and 941 rims from Ibis fall into the realm of the “The New Wide” as they put it, and as you can see pictured on the right, offer a 35mm internal width that dwarfs the offerings of most other competitors. Some of you will note that Derby Rims also manufacturers an ultra wide rim, and you probably won’t be surprised to hear that Ibis liked the idea so much, they funded half the original tooling expense of those rims. According to Ibis, having access to those rims provided invaluable insight. That said, Derby’s rims are made in a different factory due to the higher quantities required by Ibis, but they heartily endorse his product if you’re looking for only rims. 

For those who have made it this far, here are the details:

  • 41 mm outside, 35 mm inside width, 27.5” / 650b diameter
  • 1650g for the set
  • rim only 475g
  • Wheelset Weight: 1650g (pair)
  • SRP: $1299.00 (pair)

  • 28 mm outside, 22 mm inside width, 29” diameter
  • 1580g for the set
  • rim only 375g
  • Wheelset Weight: 1580g (pair)
  • SRP: $1299.00 (pair)

  • 41mm outside, 35 mm inside width, 29” diameter
  • 1770g for the set
  • rim only 490g
  • Wheelset Weight: 1770g (pair)
  • SRP: $1299.00 (pair)

The wheels will be built around hubs manufactured in Taiwan to Ibis’s specifications. They feature Enduro bearings and will be available with either a Shimano or SRAM XD driver. They will employ a conventional 32 hole build (using triple butted spokes!), and each of the carbon spoke holes are reinforced with extra carbon, to ensure the rims will not be damaged if a spoke breaks.

Via Ibis

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

34 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Joseph Clemenzi
9 years ago

#neat

Anthony
Anthony
9 years ago

Too bad was hoping the BIG news today would be a Tranny 29’er.

Tandumb
Tandumb
9 years ago

22mm inside width is considered wide?

Tim
Tim
9 years ago

Are these weights for 26, 27.5, or 29?
Longing for a Chinese copy at a quarter the price.

Tim
Tim
9 years ago

Oh, right. The 9’s and 7’s indicate size. There are no rim numbers starting with a 6.

dougal
dougal
9 years ago

Actually for 1299, it is not a bad deal.

Frank
Frank
9 years ago

I don’t see how this is revolutionary or anything. Sun Rhyno Lite has been a favorite of mine for years. Glad to hear they’re working on making wide lighter though.

Jasen
9 years ago

How convenient, they released these one day before Enve.

groghunter
groghunter
9 years ago

@Frank other than the narrow one, these are almost twice the inside width of a Rhno lite. Heck, even a FlowEX is 25% wider. you haven’t been riding wide rims.

Fattylocks
Fattylocks
9 years ago

Am I the only one who trashes mountain bike parts?
Oh and the Velocity Blunt 35 has been around a while, no?

Danno
Danno
9 years ago

OK, I’ll be the one to ask: how the heck does your tire stay seated on the hookless rim?

groghunter
groghunter
9 years ago

I’m curious to see if you get a good answer, but my understanding is: it’s a combination of air pressure, and the fact that tire beads don’t stretch the way they did when bead hooks were invented.

nh
nh
9 years ago

We have come a long way from Mavic 717 rims!

Joseph Clemenzi
9 years ago

@Fattylocks – FIRST THING I THOUGHT OF! LONG LIVE VELOCITY!

Rich
Rich
9 years ago

@ Jasen: Yes, at a 1/3 of the price (or more) of ENVE!

kyle jordan
kyle jordan
9 years ago

@Fattylocks and @Joseph Clemenzi, the blunt has a 35mm external width, not internal.

Waz
Waz
9 years ago

@danno Specialized have been running beadhook-less rims for a little while on their carbon roval wheels. Heres a good vid that explains the (not-so) tech http://www.bikemag.com/gear/exclusive-up-close-with-specializeds-beadless-clincher/

Sean
Sean
9 years ago

@Danno, they would have increased the BSD (bead seat diameter) so the tyre has no ‘slack’ when mounted and inflated ie. can’t lift up over the lip. The channel in the middle like the majority of rims allows the tyre to be fitted to the rim by giving the ‘slack’ needed.

Mindless
Mindless
9 years ago

Picture on the left is NOTHING like “your typical rim”. Could we please not use utter bull’s feces in marketing materials?

Cheese
Cheese
9 years ago

*tennets

Johan
9 years ago

AM Wide lightning, 29mm internal width and only 380gr and about $600 for the wheelset.
I think wide is the new black, would love them but they ought to be cheaper as the hook does not need to be machined. Also the weight is just a bit too high for XC even on light tyres.
How about a 30-32mm internal width and 400gr for XC.

JasonK
JasonK
9 years ago

Jobst Brandt describes an important factor in keeping a tire on a hookless rim: the casing constricts considerably when inflated, which helps secure the tire to the rim. Note that spoke tension falls (a little) as inflation pressure increases.

Jobst’s account is here:

https://groups.google.com/forum/m/#!topic/rec.bicycles.tech/hcK-8-8qZ3c

Whitesnake
Whitesnake
9 years ago

Have been testing my new Dually 29 (45mm) wheel set this weekend and never have I had so many rim hits. Riding 2.3″ tires now but moving over to 3″ in front and 2.5″ in the rear.

Ghost Rider
9 years ago

@Cheese — it’s actually “tenets”, but nice try at correcting the text in the article.

Brian
Brian
9 years ago

What hubs are these wheels going to be running?

Ryan Henry
Ryan Henry
9 years ago

Reduced rolling resistance and increased traction. Oxymoron? Sounds like your typical marketing garbage to me.

K11
K11
9 years ago

am i the only one wonder what “enduro bearings” are?

Ghost Rider
9 years ago

@K11 — Enduro Bearings is only one of the largest manufacturers of high-quality cartridge bearings in the world.

TheKaiser
9 years ago

Whitesnake,

It is interesting that you say that about the rim hits. I had some HED 45ish mm rims on my DH bike years ago, which I had bought because of similar “wider is better” hype back then (anyone remember Sun DoubleWides?). I was pinch flatting every run, even with 2.35 DH tires at 40psi, and I don’t just mean pinching the tube, but also pinching holes in the tires DH casing! This was only remedied by running 3.0″ Gazzoloddi tires. I had other wheelsets with 23mm and 30mm internal rims, and had no such problems with them, so I am inclined to believe that wider is not better beyond a certain point, which may not be much beyond a 2:1 tire to rim ratio.

Mindless
Mindless
9 years ago

2:1 sounds about right. 30mm for typical modern tires. Though for fat bikes, I think 80mm is kinda sweet spot IMO, and that is wider.

plume
plume
9 years ago

$1300 for a set of carbon wheels is extremely aggressive pricing. Puts carbon with in the same conversation as many high quality hand built or fancy system wheels using alloys. I’m intrigued. If the wheels ride as good as the bikes, I’m sold.

Kraft Durch Fruede
Kraft Durch Fruede
9 years ago

Sick animation!

BBikes
BBikes
9 years ago

Been trying a few 29 carbon wheel sets , with the new Roval Carbon 29 wheel set I get confidence with a $125 rim replacement , if an accident should arise, wheels are light and easy to change a tire when needed, use Dt inners with a 36 tooth engagement and have held up even when tires have not. The inner measurement is 23mm and tire profile has a lot of rubber on the ground.
Envy am 60 are noticeable stiffer than the Specialized Roval, seem to put a bit more rubber on the ground and can punch through a rock garden better than any rim I have ever owned. The inner rim measures 1mm wider than the Rovals . The Envy rims are very stiff and alow a more stable line with less imput, this is a big plus as it keeps the tire planted. The Enve’s stiff rim pushes the tire into the dirt on off cambers and builds confidence. For some reason I have not had a flat with the Envy rims , ever, in 6 months of riding. Both wheels are set up using sealant running 29×2.35 Knobbie Nic tires. I would not be able to fit much more tire on this bike.
Will have to try the new wider rims with a 2.1 width tire and see what happens, so far each wheel set has a lot to offer.

ahunter
ahunter
9 years ago

Seriously, no 26″ option? Are you guys abandoning your entire installed base? I am tired of the bike marketing machine obsoleting perfectly good bikes (in particular my HD)

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.