Home > Bike Types > Cyclocross

NAHBS 2014: Engin Revs Up Titanium Bicycle Frames, Shows One of Each

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

NAHBS2014-Engin-custom-painted-titanium-mountain-bike01

In short order, Engin went from showing an early (and impressive!) titanium build last year to a complete collection this year, making it his primary frame material. We got a peek into his change with our pre-show interview, then we got a look at the real bikes in Charlotte.

Not too many people opt to paint titanium frames, but when they do, they usually go for broke. The red one above gets a gorgeous candy apple gloss with masked sections to show the metal. Click through for detail pics and a look at road, ‘cross and a bare ti mountain bike, too…

NAHBS2014-Engin-custom-painted-titanium-mountain-bike03

Even the masked sections get subtle paint detail to create shadows where the lines overlap. This hardtail 29er comes in at 3.2 lbs for the frame with one heck of a paint job. The entire bike as shown was right at 20lbs with Stan’s new Valor carbon rimmed wheels.

NAHBS2014-Engin-custom-titanium-mountain-bike02

Builder Drew Guldalian has done more than just start welding titanium sticks together. He now has tooling to butt titanium tubing in house, which he says saves 115g per frame. That’s about a quarter pound, and he says everyone who’s ridden one says it feels more lively. By butting them that way, it lets him use larger diameter tubes, which lets him utilize the material as it should be and better fine tune the ride.

Titanium butting is done on a centerless grinder, which grinds away the metal in the center of the tube. Contrast that to steel tubes, which are bent and stretched around a mandrel from the inside. Drew says it’s dangerous in that titanium likes to spark, but the process isn’t terribly difficult to learn.

NAHBS2014-Engin-custom-titanium-mountain-bike03

The ti hardtail 650B (two photos immediately above) has his new 1″ diameter chainstays. The default has generally been 7/8″, but Drew says the benefit is that it’s stiffer. But it took a lot of work to fit it into that application and still have good tire and heel clearance. It’s an option on all ti frames with a Pressfit BB shell -road, cyclocross, etc.- and a few threaded BB shells (mainly 73mm MTB) can take it.

Not shown, he also had a raw, unfinished titanium 29+ frame with their own box sectioned, CNC’d clamshell yoke. It’s headed for Paul of Paul Components. It has a steel fork, titanium stem and the new Paragon Toggle Drop thru axle dropout.

NAHBS2014-Engin-custom-titanium-cyclocross-bike01

A titanium cyclocross bike.

NAHBS2014-Engin-custom-titanium-road-bike01

And a ti road bike. All road bikes now have clearance for 28c tires, but they keep the tight chainstay around 410mm for most. Guldalian says the shortest they can go is 405mm and not have a 28mm tire hit the seat tube. It’s custom, of course, so it should suit your style.

NAHBS2014-Engin-custom-dropouts

New road dropouts made by paragon but proprietary for them, and they look fantastic. Note the sculpting on the back edge of the replaceable dropout – that’s the kind of attention to detail we like from small builders.

DSC05925

EnginCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
steamcat
steamcat
9 years ago

Gorgeous – simply gorgeous. I am drooling. I love the attention to detail that the small builders bring to bike manufacturing.

Doublebagger
Doublebagger
9 years ago

Yeah. Gorgeous bikes, but I’m wondering why he bothers butting the tubes then uses those, uhm… let’s just say “not well thought out” dropouts. Pretty, but a real waste of material and weight. And the road version looks like a rough prototype of the Firefly dropouts.

K11
K11
9 years ago

name the bicycle category, there isn’t a carbon frame i would rather own and ride than one of these, or another custom ti frame builder. (there are a lot of options for ti frame builders)

ABW
ABW
9 years ago

Gotta give credit where it’s due. Peter Verdone is responsible for Engin’s dropouts, both road and mountain: http://www.peterverdone.com/?p=5102

ABW
ABW
9 years ago

Gotta give credit where it’s due. Peter Verdone is responsible for Engin’s dropouts, both road and mountain. I’ve tried twice to link to his page, but the comments don’t seem to like it. But check out Peter’s blog if you like to read a strong, well-considered opinion about how things should be done.

pornitswhatlwouldratherbmaking
pornitswhatlwouldratherbmaking
9 years ago

Peter Verdone is one smart dude.

greg
greg
9 years ago

ditto on Peter Verdone’s site. if for nothing else, his chart on suspension oils and their viscosity.

Singletrackroadie
Singletrackroadie
9 years ago

Simple and just amazingly beautiful.

Yolo
Yolo
9 years ago

@Doublebagger – Peter Verdone also did the dropouts for Firefly’s titanium road bikes – hence the similarity.
I’m curious as to why you say they are not well thought out?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.