Home > Event Coverage > Interbike

IB13: Wilier Tries Out Road Disc with new Cento1 SR Disc, Offers US Specific GTs

7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Willier Disc road bikes20130918_0203

The list of high end road bikes equipped with disc brakes is growing. Perhaps it’s the availability of Sram’s Red and Shimano’s R785 hydraulic discs, or just companies not wanting to be left out. Either way, when companies like Wilier are putting together high end disc builds, it looks like disc brakes are here to stay – at least as an option along side the standard bikes. For Wilier, their disc brake bike is a variation of their Cento1 SR and joining the ranks next to the aerodynamically shaped Cento1 AIR. Built with almost identical lines to the rim brake Cento1 SR, the Cento1 SR Disc is disc specific with all of the necessary provisions for routing hydraulic lines internally.

See more, plus the new US specific GTs road bike after the break!

Willier Disc road bikes20130918_0204 Willier Disc road bikes20130918_0208

While the rear brake gets the internal treatment, the front brake hose is simply clipped to the back of the fork leg as it travels down to the front rotor. The cable guide plate system of the original Cento1 SR and AIR continues to the Disc which allows for mechanical or electronic shifting systems with clean mounts for the batteries available. The design also aids in aerodynamics with the barrel adjusters tucked behind the down tube. The frame also makes us of the higher modulus 60 ton carbon in key areas to keep the weight down and stiffness up.

Willier Disc road bikes20130918_0205

Like most  road disc brake bikes, the rear caliper is tucked between the stays which prevents the seat stay from needing to be braced against the chain stay which would hamper ride quality. The rear end is spaced at 135mm which sits at the end of asymmetric chainstays. The bikes disc mounts are capable of running 140 or 160mm rotors.

Willier Disc road bikes20130918_0206

As with the other bikes in the line, the Cento1 SR Disc uses a BB386 bottom bracket which should make for an extremely stiff lower half of the frame like other Wiliers.

Willier Disc road bikes20130918_0207

The Cento1 SR Disc uses an integrated seat mast with a Ritchey saddle clamp, which makes the bike one of the few disc brake equipped bikes that also uses a seat mast. Offered in frame set only, the disc brake Cento1 will run the exact same as the other Cento1 road frames and be offered in XS-XXL. Frame weight for the Cento1 SR Disc is quoted at 990g and 360g for the fork

Willier Disc road bikes20130918_0213

Created specifically for the US market, the new GTs is a more relaxed geometry gran fondo bike if you will, that replaces the GT.

Willier Disc road bikes20130918_0212 Willier Disc road bikes20130918_0211

Equipped with a tapered headtube, threaded bottom bracket shell, and a frame that’s capable of running mechanical or electronic drivetrains with internal cabling, the GTs will retail for $2599 as shown. Frame weight on the GTs is 1050g with a 360g fork.

 

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
pornitswhatlwouldratherbmaking
pornitswhatlwouldratherbmaking
10 years ago

that Cento is making my pants a little tighter….thank God for spandex!

Peter R
10 years ago

I don’t know if that shifter cable routing on the Cento Disc is awesome or a huge P.I.T.A.
anyone have experience with it for mechanical setups?

fisho
fisho
10 years ago

Please frame companies, use a BB standard like Press Fit so we can choose what cranks to use in these frames.

ChrisC
ChrisC
10 years ago

BB386 EVO is compatible with pretty much everything.

wheelz
wheelz
10 years ago

Looks like my next road bike will be with disc brakes. Starting to be some nice looking options out there. I was descending from 10,500 feet to 5000 feet on 8% grades in a hail storm a few weeks back and this was the first time I thought “Gee, disc brakes would be nice right now.”

Ajax
Ajax
10 years ago

I like it. The disc cable routing looks neat and tidy. Wilier just needs to add thru-axle dropouts.

Vernon Jackson
8 years ago

Can Ursus CB58 wheels be mounted on the Wilier Cento1 SR disc?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.