Home > Bike Types > Cyclocross

Wolf Tooth Components Shows Prototype CX Chainrings, 120 BCD Rings Now Shipping

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

WTC CX 120 narrow wide rings168

Wolf Tooth Components has been busy. Since spotting them at NAHBS, they have been busy machining just about every mountain bike chainring standard you could think of with a drop-stop tooth profile. After seeing the first anti-drop MTB ring, it seems riders have been clamoring for a cyclocross version of the ring, and WTC is listening. Along with Absolute Black’s recent CX offerings, WTC is in the final prototyping stage for both 110 and 130 BCD CX chainrings.

In addition to the CX prototypes, WTC is now shipping 120 x 36T BCD mountain rings – perfect for your SRAM XX, X0, and X9 2x cranks with a 120 BCD spider. Detail on both rings, next.

WTC CX 120 narrow wide rings167

Like the rest of WTC’s offerings, both of the new rings are still machined in house, in Minneapolis.

WTC logo Final

Soon you will also start to see WTC’s new logo popping up – which was created with the help of a local artist/graphic designer.

WTC CX 120 narrow wide rings169

The CX ring design has been completed and is shown here. WTC machined a limited number of 110x42T rings for testing and feedback which will be under elite riders in both the US and Europe. The rings are still in the early stages of testing for things like chainline, chain retention, etc., but WTC expects the performance to be good. While this batch is marked as prototype, there are no plans to change the design unless feedback from the riders requires is.

Since there isn’t a CX specific clutched rear derailleur, WTC makes no claims that the chainrings will be 100% drop proof unless you retrofit a mountain derailleur to your bike. We have used a SRAM Type 2 rear derailleur with SRAM 10 speed shifters and it works well, so that is likely the best set up for the rings. However, we have had pretty good luck with their mountain rings on a non-clutched rear derailleur, and the fact that the rings are larger than MTB models, the performance without a clutched rear derailleur should still be pretty good – we plan on testing that out very soon.

It should go without saying, but the chain rings will not work on SRAM Red/Force 22 or Shimano DA 9000/Ultegra 6800 11 speed cranks due to their different bolt patterns.

CX rings are pre-selling now in 40 and 42T, 110 and 130 BCD now, with the 38 and 44T rings available soon. Pricing for the 38-42T rings is set at $79, with the 44T at $84.

120 BCD Wolf Tooth Ring

On the 120 BCD cranksets, 36T is the smallest ring that will fit. Like their 30T 104 BCD ring, the 36T 120 ring must be offset in order for the chain to clear the spider’s arms. Wolf Tooth does have plans for a 38T ring, but it will be awhile before it is available since demand for rings bigger than 36 is fairly small. According to WTC, they aren’t aware of anyone else currently offering a 120 BCD ring, which has been requested by quite a few of their customers who are running power meters.

In order to work with the SRAM cranks, the chainrings are threaded and require the use of SRAM’s chainring bolts. You can pick up a 120 x 36T ring now for $79.

WTC CX 120 narrow wide rings171 WTC CX 120 narrow wide rings170

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
HubsGuy
HubsGuy
10 years ago

I’m guessing NOT Campy 11 compatible

don
don
10 years ago

I ran a prototype wolf tooth 42t 110bcd ring this past weekend. My major jake was already set-up single ring 42t, so changed rings and took off the k-edge cross guard. Had planned to put on a X0 type-2 derailleur, but ran the Force that was already instead.

Rode, some fire-road, singletrack, and even a long stretch of rail road tracks (because my daughter was in silly mode). I dismounted/remounted with authority a few times, back pedaled on the top of short climbs in the 28t rear and tried to make the chain come off. It didn’t.

After an email to wolf tooth with my feedback I learned they are confident it will work with a clutch/type 2, but are looking for veification it will without. I did so by accident and thought for sure I could make the chain come off. If it continues to be bomber they just saved me a few hundred bucks in X0 derailleurs. Good stuff!

don

JF
JF
10 years ago

Order in! Pumped to put this on my bike.

Rain
Rain
10 years ago

Offset inside too!

Sold

Ck
Ck
10 years ago

Very excited to see these crop up for CX use.

jose espinoz
jose espinoz
10 years ago

sweet!!!, good to know that now I can swap the 42t from my XX for something else.

K11
K11
10 years ago

Interested in the cyclocross version. Bike Rumor, when testing these please include extremely adverse cx conditions, mud / grass. See if chain releases smoothly from tooth profiles. thanks

nick
nick
10 years ago

given the INNER width of the 11spd chains is the same, can you confirm the issues with use of the 11 speed Sram/Shimano groups?

1×11 should be great for CX

Wolf Tooth
10 years ago

@nick they work great with 11-speed chains, derailleurs, etc. Unfortunately, both SRAM and Shimano chose to use non-standard chainring interfaces for their 11-speed cranks so our 110 & 130 BCD rings won’t physically bolt on. You can just use a different crank though and eventually we plan to make rings to fit the new cranks as well.

slippyfish
slippyfish
10 years ago

Boom. Done. 110×40.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.