Home > Feature Stories

First Look: Race Face Prototype XX1 Compatible Narrow/Wide Chain Rings

28 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

First Look: Race Face Prototype XX1 Compatible Narrow/Wide Single Chain Rings

It appears that it won’t be long until Race Face joins the growing list of companies providing XX1 compatible chainrings that will retrofit existing cranks. Official details won’t be released until Sea Otter, but we got a little sneak peek at what’s down the pipeline.

Get all the details as well as why companies are able to make these rings, after the break!

First Look: Race Face Prototype XX1 Compatible Narrow/Wide Single Chain Rings

Built on the same narrow-wide principle as all of the other XX1 compatible single rings on the market, word is that the Race Face Narrow/Wide Single ring will be compatible with 11, 10 and even 9 speed chains allowing you to ditch the front derailleur with almost any set up. Built with the characteristic stiffness and performance of other Race Face single rings, the narrow/wide rings will be offered in 32-38t, 104 BCD rings with plenty of Ano color options to match your current Race Face cranks. Weight of the new 32T ring is said to be 38g. Full details from the Otter!

On a side note, we asked Race Face why everyone has been able to produce narrow/wide rings without infringing on any patented designs from SRAM. The surprising answer, is that the concept of narrow-wide chainring goes back to an expired patent from the 1970’s. Race Face, and we’re assuming everyone else other than SRAM, has designed the tooth profiling within the scope of that expired patent, to avoid any patent infringement and create a ring with excellent chain retention properties. Sram will likely be able to patent some of the aspects of XX1, though companies like Race Face have been very careful to design their own versions of this what’s-old-is-new-again technology.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

28 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Andy
Andy
11 years ago

So when are we going to see this for a 5 bolt road crank?

i would love to see a 110 or 130 BCD in say 36 to 44 tooth, so we can use it on cyclocross and commuter bikes, would even be an option for those doing hillclimbs.

Please component manafacturuers, those of us who like 1x(whatever u like) drivetrains ride more that just MTB’s

David
David
11 years ago

Love the idea of XX1 but until the price of that 10-42 11 speed cassette drops its just a dream.

Fredrick
Fredrick
11 years ago

is it just me, or do those teeth not look nearly as tall as the ones on the XX1 crank?

ccolagio
ccolagio
11 years ago

good call – looks to be a few differences in the shape:comment image

Seraph
Seraph
11 years ago

Huh, looks like an E.13 Guide Ring.

don
don
11 years ago

Right on Andy! Race face give us 38, 40 and 42 with compact/road bcd. Combo with the new clutch rear derailleurs and you have a bomber single cx set-up that doesn’t need any front guard.

don

Bob
Bob
11 years ago

This RF ring does not look like the Sram ring because of the potential patent issues discussed in the article. They are working within the confines of the old patent of the narrow/wide tooth profile.

limba
limba
11 years ago

Sram will have XX1 for cross next year.

Lev
Lev
11 years ago

What a shame Race Face don’t do any R&D themselves. Cheap Canadian knock off….

John
John
11 years ago

@lev- race face seems to know how to saddle a gift horse.

Mike
Mike
10 years ago

@Lev Where are you getting that information? You do realize that every single part gets designed in Canada by Raceface themselves, right? Raceface =/= knockoff.

Rivers
10 years ago

@Lev, Do you have any facts to back up your words? Do you have any idea how much they put into R&D? Please think before you spout off.

Reid
Reid
10 years ago

I agree with Lev. The shaping the XX1 single ring is really simple, wide teeth for wide links, and skinny teeth for skinny links. Its surprising that no one came out with it before, for mtn, CX or town bike use. However, the didn’t, Sram was first. The fact that now everyone comes out with similarly shaped chain rings for XX1 or other 1x applications, even if they did their own design, is still a cheap knock off of Sram’s idea.

Bob
Bob
10 years ago

The main point being that it really isn’t Sram’s idea or concept either. You defeated your own point with your own argument. Very nice work Reid…haha…

Woof
Woof
10 years ago

RF not everybody is a racer boy… and some of us actually climb mountains… how bout a 28 and 30 ring also ?

Race Face
10 years ago

Woof – Race Face will have a magical 30t 104 BCD ring to add to the mix soon enough as well.

Lev
Lev
10 years ago

So you are telling me that Race Face was developing this chainring and SRAM beat them to it with XX1? Rubbish. They are jumping on the bandwagon and don’t deserve any praise.

Mike
Mike
10 years ago

Opening the market to other options is a good thing. Do you want to be stuck buying SRAM-manufactured-only rings at a huge markup for your shiny new XX1 system?

Zach
Zach
10 years ago

Lev who cares if it’s a cheap Canadian knock off. Race Face has produced plenty of high quality products over the years. I’d rather buy this ring in a 32 and a 34 and run a X9 Type 2 with a 11-36 for the fraction of the price of a full XX1 system.

JB
JB
10 years ago

@Reid Somebody else DID come out with it before – there’s a(n expired) patent from the 1970s, which is why RF and others can produce the wide/narrow tooth pattern without fear of patent infringement. The only reason it didn’t hit then is the rest of the drivetrain and the style of riding in the 1970s, along with the manufacturing technology, didn’t make it feasible to be a commercial product.

Now, with wide range cassettes, faster riding and rougher terrain, it makes a lot more sense – and CNC machining allows it to be produced much cheaper and more precisely. SRAM brought it back, and they may have come up with the idea again independently, but they didn’t invent it.

Joshura
Joshura
10 years ago

@Lev, you need to realize that there is a difference between a high quality imitation and a cheap knock-off. RaceFace produces high quality components, and are trying to remain competitive in one of the most competitive markets in the world. RaceFace recognized a good idea with XX1 and created a direct competitor. By your logic, any bicycle in the world is a “cheap knockoff” of the first diamond-framed bicycle ever. This is business, there is no room to be offended by a company using another company’s idea. It’s not infringement, it’s competition. If you’re offended, by the SRAM chainring instead. Let your purchases speak for you.

limba
limba
10 years ago

So these rings will work with my Deus 3×9 crankset?

Mindless
Mindless
10 years ago

@Andy: for this to work one needs a one way clutch rear derailler as well. That is why nobody bothered with the concept before Shadow+ and SRAM’s knockoff became available.

DirtyJerzy
DirtyJerzy
10 years ago

@Lev, what part of “the concept of narrow-wide chainring goes back to an expired patent from the 1970?s.” don’t you understand?

RockyJonny
RockyJonny
10 years ago

Got one of these the first week they came out, approx June 11th. 36 tooth red on my Rocky Mountain Vertex 950rls. Works perfectly!!!! The rear derailleur is a 10 spd Sram x9, not type 2. I have not dropped a chain as of yet. Keep in mind this is a hardtail 29er and is ridden as such. That being said I do ride my bikes hard up and down. By removing the front derailleur and everything associated with it I removed over a pound on the bike. This product simply works! Plus it makes for a very clean looking, simple setup. Thank you Race Face!

Calvin
Calvin
9 years ago

I would like to test a 50t N/W chainring with 10-42 casstte on a road bike, this setup has greater range than 34-28 and 53-11

Rakesh
Rakesh
8 years ago

Is this is bicycle ring or motorcycle?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.