Home > Feature Stories

Hacktastic! DIY Automatic Electronic Suspension Lockout w/ Stealth Remote Buttons!

20 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More
Vladimir Kolotov DIY automatic terrain sensing mountain bike suspension electronic lockout system with stealth remote button controls
We left this image really large, click to see full size. Detail shots after the page break!

After hearing nothing but positives from those that have ridden the LaPierre x Rockshox EI Shock collaboration and seeing the potential for battery powered suspension adjustments from Fox using a Shimano Di2 battery, we’re excited for the future. If nothing else, they can offer minuscule (and aesthetically pleasing) buttons to change shock settings. On the big end of ideas, pulling power from an eventual electronic drivetrain’s battery and truly offering precognition for trail conditions is pretty slick. Retro grouches be damned!

Seems Vladimir Kolotov agrees and didn’t wait for others to roll it out en masse.

Combining his love of riding with a talent for small electronics, he’s built his own terrain sensing system that can automatically adjust between a fork and shock’s open or closed position. And for control freaks, he’s built what’s arguably the cleanest set of controls we’ve seen. Or, rather, not seen…

There are really two systems worth calling out here. The first is the remote lockout shown in the video. Tiny buttons are hidden under the grip, making them invisible on the bike but easily accessible.

That’s an awesome hack in and of itself. But wait! There’s more!

From there, Kolotov put small accelerometers on the fork’s crown and inside the steerer tube (unsprung and sprung), a cadence sensor linked to a microcontroller and battery hidden inside the steerer tube. The idea is that you can teach the system to react to forces at the front of the bike to control the suspension settings based on impact forces, riding speed and pedaling cadence.

The LaPierre x Rockshox system uses similar data sets to firm up the suspension when the terrain is smooth and open it up when things get rough or a big landing is expected after launch. Kolotov says his system can very easily be programmed in C++. He’s done just that and created three modes built around Fox’s new CTD shock. The first is the manual mode described above

The second reads the bike’s incline angle and automatically selects the appropriate setting within Fox’s stock CTD settings, like so (note the rotation direction and position of the levers as the bike’s front or rear is lifted):

The third setting is where it gets really interesting. He’s created an Android app to view system activity and control the settings. Currently, it lets you set baseline incline/decline points where you’d want it to move between CTD settings, but eventually it could provide complete control over the system however it needs to be controlled:

Basically, it could let you dictate where the suspension should be during different activities (coasting, pedaling on flat, pedaling on climbs, etc.) and/or let predefine positions based on suspension movement so it automatically adjusts based on trail conditions. Because it’s easily programmable, the options are essentially limitless. With built in Bluetooth, the changes can be made wirelessly via smartphone or using the buttons on the handlebar.

Controls and data on left are for semi-automatic mode where you set gradient points for suspension setting changes. Red line is raw inclination data and blue is the averaged (more like actual) bike incline. On the right are settings for full auto mode where it measure front end impacts for both the shock (red) and steerer tube (blue) and lets you set the severity at which it changes modes.

Settings pages within the app give you plenty of system control.

It gets better. It’s very low power, meaning it only needs a small battery that can fit inside the headtube (or draw minimal power from a Di2 battery when the time comes). It powers off when not in use, too, giving it months of standby.

It’s also light. Kolotov says the entire system weighs in at just 120g, about a third of the LaPierre EI system. Lastly, it’s cheap…his parts total was under $100 using off the shelf electronics.

Big thanks to Vladimir for sending this over!

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

20 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
bikerdrone
bikerdrone
11 years ago

Genius. Now watch Shimano or Sram make the same thing but bulkier with a crap battery life and a price of around $1000.

Joshua Murdock
11 years ago

Probably one of the coolest things I’ve seen. That’s awesome!

Topmounter
Topmounter
11 years ago

Performance Enhancing Technology.

GN
GN
11 years ago

To bad the Monarch Plus or LaPierre Spicy 916 are not available in the US in 2013. This guy should start a Kickstarter project!

notmikeb
notmikeb
11 years ago

Just rife with badassery

Greg
11 years ago

this is sweet. and I completely agree with notmikeb, well said!

trickle
trickle
11 years ago

This is the next big jump for mountain bikes. Intelligent suspension. Cant wait!

Taylar
Taylar
11 years ago

I hope this man is patenting this… potential for income here..

pepe
pepe
11 years ago

excellent

Xris
Xris
11 years ago

Rock Shox needs this man and his ideas.

John
John
11 years ago

Electronically controlled, single pivot design (why bother with all the DW/FSR/blah blah links with a smart shock?),180 mm of travel, SRAM 1×11, and 650B. Put it all in one package, and it’ll be the Holy Grail – a big travel bike that pedals like a hardtail when it should, yet plows through chunder with ease. I CANNOT WAIT – BRING IT!

Purist
Purist
11 years ago

While I salute the tech involved & creativity of the designer I can’t help but feel, like so many technologies, it is ripe for ab-use.

The ability for smart suspension has obvious benefits, but who amoung us will just set-it-and-forget-it..& appreciate the improvement …answer…no one. Be honest, can’t you just see yourselves constantly fiddling & concentrating TOTALLY on screwing with the adjustments & forgetting about the RIDE? Like idiots texting on a ride.

This is in no way meant as a criticism of the concept…just an unintended consequence of human nature.

Balor
Balor
11 years ago

@John
You mean true, non-linkage dirven single pivot, I presume? It has limitations beyond ‘pedalability’ (anti-squat). Brake jack, pedal feedback, shock curves, etc.
In fact, I suspect best suspension would still be DW-iink or other VPP variant – but tweaked for less anti-squat because it would be up to the shock.

This way, you can have truly ‘do it all’ bike.

Federico F.
Federico F.
11 years ago

Genius! Is there any website to link to in order to send the word out? Or evev only to contact him in order to ask for a bit more in-depth DIY manual? If it is really so cheap it would be worth trying!

bin judgin'
bin judgin'
11 years ago

my nomad already rides perfect.

Wilson
Wilson
11 years ago

I would pay $400 for this system. Tell Vlad to ramp up the Kickstarter and make it happen!

Andy
Andy
11 years ago

Why?

Martin
Martin
10 years ago

EXCELLENT!

zrr mntl
zrr mntl
10 years ago

“..LaPierre threatens with lawsuits..”
Seems Vlad have problems with patents that were registered AFTER he posted a video on YouTube(now deleted) lol.
Maybe someone can help him (vkolotov at gmail)

LJ
LJ
5 years ago

He should have left the videos up, claimed prior art and an infringement of his own IP and taken them for every penny they have.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.