Home > Bike Types > Mountain Bike

Crank Brothers Iodine 29er Trail Mountain Bike Wheels Start Shipping

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2013-Crank-Brothers-Iodine-29er-wheels-hans-rey

With 29ers getting more and more travel, wheel options continue to expand. The latest comes from Crank Brothers with their Iodine model getting wagon wheel super sizing and designed for 100mm to 130mm travel bikes.

These were introduced with limited info at Sea Otter, so the news is that they’re shipping now, plus full specs and claimed weights are in. Available in two levels, 2 and 3, the 29er wheels get a redesigned rim profile to handle the increased abuse of all-mountain riding and the additional stresses of the larger diameter. Interestingly, this was done by making the extrusion thinner, which helps minimize rotational mass.

UPDATED: Just spoke with their wheels engineer who said the outer shape of the extrusion is the same as the 26″ Iodine wheels, but the internal shaping is slightly thinner because simply making a 29ee wheel from the 26″ rim would have been heavier than necessary given the intended use. The “stronger” claims come into play when comparing this rim extrusion to the lighter, narrower (19mm inside) Cobalt 29er rim.

Both models use the same rim and come with front hub end caps for 15mm and 20mm thru axles. The rims carry forward their paired spoke design, which attaches the spokes without penetrating the rim bed so they’re tubeless ready out of the box.

Click through for product photos and specs…

2013-Crank-Brothers-Iodine-29er-3-mountain-bike-wheels

The higher end 3-series wheelsets get a double anodization on the rims, and they get a new convertible rear hub that can swap between 12×142 and 10×135. Other premium features are an alloy freehub body and hollow alloy spoke sections (the thicker “nipples” that connect the short steel spokes to the hubs) with Sapim stainless steel spokes.

2013-Crank-Brothers-Iodine-29er-2-trail-mountain-bike-wheels

The 2-series wheels get a steel freehub body, standard stainless steel spokes with solid alloy “nipples” and a non-convertible rear hub available fixed in either standard. UPDATE: you can down comvert the 142 hub to 135, but not vice versa.

Both wheels use the same rim, though, so at least the extra 70g of weight on the 2-series is concentrated more toward the center.

2013-Crank-Brothers-Iodine-29er-wheel-specs

They’re at distributors now and should be in shops soon, with a limited number available through Crank Brothers’ website this week.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
fanboy
fanboy
11 years ago

no comment that I could possibly make would suffice. Best if CB just recall them now and save the trouble later.

Le Piou
Le Piou
11 years ago

any 650b product in the starting block?

MissedThePoint
MissedThePoint
11 years ago

Turner used to run CB wheels on their demos, but switched to Enve. The CBs were really loud, maybe louder than Hopes. Couldn’t make a direct comparison, but I could speculate that their pawls are really strongly sprung. They didn’t seem all that bad besides for that.

Riding the Turner demos again with the Enve wheels is a serious treat though. Skip the high end alloy wheels and go for quality carbon, IMO. Skip the cheap carbon too.

Mtnbikej
Mtnbikej
11 years ago

Have been running a set of these all year. Got about 1500 miles on them. No problems to this point.

Sancho
Sancho
11 years ago

Not stoked about a 24 spoke “all mountain” 29er wheelset.

Mike Spandel
Mike Spandel
11 years ago

Sure to be as burly, durable, and well-engineered as the Kronolog.

Sam
Sam
11 years ago

A local had his 29″ Cobalt wheelset (had about 90 miles on them) on Craigslist for ~$300. Not sure why I decided not to pick it up.

fanboy
fanboy
11 years ago

Mike Spandel – “Sure to be as burly, durable, and well-engineered as the Kronolog.”

well put.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.