Home > Feature Stories

TRP Parabox Hydraulic Disc Brake Converter – Unboxed & Weighed, Changes Coming

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos
9 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

The TRP Parabox drop handlebar hydraulic brake converter debuted at the 2011 bike show in Taipei and quickly ran through the production process to start shipping late last year.

We just got our test unit in and immediately threw it on the scale and took lots of photos. In short order it’ll be on the MonsterCross project bike for testing and some first impressions. For now, check out the details…there are quite a few features features we hadn’t noticed on the early versions used on show bikes. Oh, and they’re already making running changes to get it ready for disc brake road bikes…

WHAT’S IN THE BOX?

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

You get the Parabox master cylinder converter, two 160mm rotors, the noodles for guiding the brake cable into the front of the box and necessary bolts for mounting everything. The calipers come with mount adapters for IS on both front and rear. Presumably, you could run smaller rotors if you’re bike’s set up for them.

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

There’s also an instruction manual. The system comes fully bled with hose lengths at 750mm front and 1,500mm rear. If you plan on shortening that, you’ll need TRP’s bleed kit and extra parts, along with a bottle of their TRP Mineral Oil Based Hydraulic Brake Fluid. If you don’t have that, TRP says Shimano’s bleed kit is a decent option, better than Avid’s for these brakes. Ideally, you’d use the kit made for the brand.

ACTUAL WEIGHTS

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Without disassembling the unit, here are approximate part weights followed by actual system weight. Master cylinder converter comes in at 196g.

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Front caliper at 131g and rear at 122g. No, those weights aren’t different just because the cable was resting differently, keep reading for an explanation.

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

System weight plus two twist ties comes in at 490g.

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

From left to right:

  • IS F180/R160 adapter plus bolts: 27g
  • IS F160/R140 adapter plus bolts: 23g
  • Noodles: 15g

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Rotors are 93g each and 105g with mounting bolts.

DETAILS

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

The master cylinder converter unit leads the brake cables in through the noodles at the front. The cables run through the silver bolts and are clamped down by small allen screws. Once tightened, small cable tension and pad adjustments can be made via allen keys on the plungers that push into the master cylinders. The noodles also have barrel adjusters to remove slack from the brake line. The black bolt in the middle/side of the body is the bleed port.

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

The master cylinder has front and rear specific sides designed to push different amounts of hydraulic fluid to each side. Shown above are the different rear (left) and front (right) calipers. Not only are the brake calipers different, but the front gets larger, longer brake pads, too. More details below. Here’s side by side visual comparisons:

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Front – Rear

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Front – Rear

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Front – Rear

Tektro TRP Parabox cyclocross hydraulic disc brake converter for drop handlebars unboxed and weighed with detail photos

Why the different size calipers and plungers?

“We started this as a cyclocross project and we wanted to make sure the rear didn’t overpower the front,” said TRP’s marketing director Lance Larrabee. “So, on the Parabox master cylinder, the rear has a 9mm plunger and the front is 10mm. On the calipers, the front has a 21mm piston with larger pads and the rear has a 19mm piston. Besides balancing the power for ‘cross, we also wanted to make sure the rear caliper was small enough to fit on bikes that placed the disc brake mount on the chainstay rather than seatstay.”

For early 2012, they’ll make a running change to make the system more compatible with road bikes, too.

“We’re seeing more road applications coming, so we wanted to make the system more universal,” Larrabee said. “The new system will have a 21mm piston for both front and rear and a 10mm plunger for both sides. The Parabox master cylinder’s mount’s current stack height is 14mm but that’ll get shortened to just 5mm, and it’ll have a bit longer reach. We found that the larger pistons didn’t have any adverse affect on cyclocross bikes.”

Larrabee says the weight and price should be about the same. The current system uses calipers pulled from TRP’s existing mountain bike disc brake line. The new version will have all-new calipers designed specifically for road and cyclocross.

Retail on this system is $469.00. It’s available in Black (shown) and White, which includes white hoses as well.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mark W.
Mark W.
12 years ago

so can anyone answer me this?
why did they feel the need to do not only different calipers but also different pads and different pad loading then decide now to make them both like the front in the future?
I dont see that rear caliper pictured anywhere in their line up like they say it should be.

yesplease
yesplease
12 years ago

Math right?

Full parabox kit w/rotors=763g total

BB7 road w/ 160mm rotors=658 + (Gore Pro) brake cables 60= 718g total

So BB7 is 45 grams lighter than the TRP disc set up…..

Thats not a huge weight gain when you consider the added feel of hydro…..

JT
JT
12 years ago

Dude,
Avid uses DOT fluid. So their bleed kit is probably not compatible with TRP/Shimano’s mineral oil based setups.

Atgani
Atgani
12 years ago

All of these systems are a “bodge” and stop gap until one of the big manufacturers incorporate the piston into their brake lever / shifter, imho

However, having seen the Hope version being used every weekend on the North West cyclo-creoss association races, there’s is a far better thought out “bodge” than this…

I could overlook the much greater stack height required by the TRP unit, but the use of different pistons etc. for front and rear is just plain daft

Gino
Gino
12 years ago

are those “noodles” using spring modulators?…
140mm rotors should be enough?….. no?
bring on the road bikes!
…. final question, will I get myself to carry that extra weight up the hill so I can enjoy that extra feel of a disc brake, or will the luxury wear off after a while?

Fred
Fred
12 years ago

Hydraulic disc road brakes scare the crap out of me… every hydro mtb disc brake I’ve owned has had moments of unpredictable, inconsistent braking. Can’t imagine diving into a descent on my hydro disc equipped road bike, approaching the first switchback at 40+ mph, pulling the brake levers and getting…. nada.

I’ve never had my cable actuated calipers fail me. Not once. Sure I’ve had poor braking in the rain. But I know its wet and know to respond accordingly.

ColinS
ColinS
12 years ago

JT, I’ve used the Avid kit on Shimano brakes (mineral oil), with no issues.

JohnM
11 years ago

Would like to see pics of this system fully installed on a bike….

leo
leo
11 years ago

Fred you’ve probable got air in your hydaulic lines, need a bleed. I find the exact opposite, hydraulic brakes in my experience are far more consistent than cable brakes.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.