Home > Reviews

First Look! Prestacycle Prestalever tire lever

6 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

It’s not often that companies take the time to re-think something as ubiquitous and established as the tire lever.  Sure, there are some that are stronger than others, and some that become favorites by being a bit more comfortable, but there are very few different tire levers on the market.  At Interbike last year, we had the chance to meet Dave from Prestacycle.  A relentless tinkerer, Dave was excited about his new Prestalever tire levers.  With their patent-pending “Rim Hook,” Prestacycle claim that their Prestalevers are faster, safer, and easier to use than anything else on the market.  Prestalevers in hand, we headed to the workshop to see how the claims held up.  Hit the jump to find out how they worked.

Square in cross section, Prestalevers are noticeably sturdier than garden variety tire levers.  What really sets them apart, though, is the deep groove opposite the fairly standard bead hook.  When removing a tire, the narrow (but thick) lever seems no easier than normal to get under a bead.  Once the bead hook has found purchase, though, the lever’s Rim Hook slides over the edge of the rim.  With the Rim Hook engaged, it’s then easy to leave the lever in place and start a second.  On looser tires, one can just slide the Prestalever around the rim and be done with it.  To disengage the Bead Hook, just push the lever away from the center of the wheel and turn the lever 90 degrees.  Even on snug road tire and rim combinations, I’ve yet to need more than two levers.  Certainly fast and definitely easy.

Better still (in my opinion) is the Prestalevers’ tire mounting ability.  With the Rim Hook engaged and the bead hook on the outside of the tire, it’s easy to run the lever around and mount all but the most stubborn tires.  As always, it’s important to take care not to pinch the inner tube.  The Bead Hook’s self-locking ability makes it easy to keep the bead from coming off in one place as it’s mounted in another- something that standard levers can’t really do.  The only instances where this method hasn’t worked for me were when trying to mount used tubeless tires- the dried sealant on the bead was just too sticky.  When mounting stubborn tubeless tires, I use one Prestalever, Bead Hook engaged, as an anchor and work towards it from the other side of the gap.

What else is cool?  The Prestalevers’ nylon material seems slicker than some other levers’ and as a result less likely to drag on the rim or tire.  The oversized hanging holes make them easy to get on to and off of nails or pegboard hooks .  Because they don’t rely on spokes to stay in place, Prestalevers are a great choice for anyone with deep section clinchers.

Of course, most tubeless tire manufacturers (and some rim manufacturers) recommend against using tire levers at all- they can damage tubeless-specific beads and weaken lightweight beads.  That said, sometimes there’s no other option.  Are they faster and easier than any of my other tire levers?  Absolutely.  Safer?  Maybe- if used properly, I can’t see one launching across the workshop like standard levers can when they lose purchase on their spoke.  At $8 apiece, they’re not inexpensive but, all in all, Prestacycle’s Prestalevers are well thought-out and work noticeably better than anything else in my toolbox.

marc

www.prestalever.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

6 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
h2ofuel
h2ofuel
12 years ago

When I saw this from the home page I thought it was a tiny tire lever that was stored on a wheel by putting on to a (presta) valve stem and hooking a spoke. Clearly when you think about it it would never work, at least on anything more than a few wheels. It isn’t curved anyway, though.

Shop Rat
Shop Rat
12 years ago

When I read this I wondered why anyone would use a tire lever to install a tire. Pretty sure that is not pro style.

Gillis
Gillis
12 years ago

@Shop Rat: When you graduate to “shop mechanic” you’ll find that some tire/rim combinations are just stubborn as hell. Back in my shop days (as a head mechanic) I took pride in getting most tires on without a lever. But sometimes its necessary.

Personally I’ve had great luck with the yellow Pedro’s levers.

marc basiliere
12 years ago

Yup,

I pride myself on my tire skills, but some combinations just put up too much of a fight…

marc

Ryan
Ryan
12 years ago

Tire/rim combos like geax tnt on stans rims are extremely tight. I would like to see someone put those on by hand, i would even pay to see it. I have put on 4 back to back one day and had a bruised hand for a few days. I would like to see how these work on that combo

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.