Home > Bike Types > Road Bike

Trick New Swedish Road Bike Brand A2J – Aero, Lightweight & Custom Electronic Shifting!

A2J swedish bike brand with new lightweight carbon aerodynamic road bike A2Z
14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

A2J swedish bike brand with new lightweight carbon aerodynamic road bike A2Z

A2J is a new brand out of Sweden “born from a shared passion for cycling” whose stated mission is to build top-end, no-compromise bicycles.

Their first creation, the A2Z shown above, looks like it’s well on its way to accomplishing just that. Designed by a team of folks with backgrounds in F1, aerodynamics and, well, here’s how they put it in on their website: (NOTE: Their website has been updated with a better description, which is copied here, replacing the original text)

Light.  Stiff.  Aerodynamic.  Comfortable.  Durable.  We did not design a bike to excel at one of these metrics.  We wanted to build a frame that would be outstanding at all five, simultaneously.  Our R frame features full internal wiring (complete with fully hidden bespoke lightweight battery option) for both mechanical and electronic shifting, modern geometry and aerodynamic architecture, one of the highest stiffness to weight ratios available, and a guaranteed maximum frame weight under 850 grams for a size 56 including headset, seatpost clamp, front derailleur bracket and rear derailleur hanger.  The frame is designed for a rider weight limit is 150 kg. (cont’ at bottom of post)

But that’s really just the beginning…

A2J A2Z lightweight custom carbon fiber road bike with integrated electronic shifting controls

A2J has wind tunnel testing planned for the frame and a complete bike with rider in the Toyota Wind Tunnel down the road. Regardless of the outcome, aesthetically, this bike is on the right track (our opinion). Technologically, it’s trying to get ahead of the curve. With the frame design nailed down, they moved on to cable routing and functionality. Since their goal is to build dream bikes, why not try to hit it out of the park?

Thanks to Shimano’s intentionally easy-to-hack Di2 system, they’ve built custom programmed shifting controls, electronics and battery inside the frame. Rather than traditional shifters, it’ll have simple up-and-down shift buttons that’ll automatically select the next best gear, combining whatever chainring and cassette cog makes the most sense. From there, they integrated cadence and speed sensors into the frame, too. All this creates a slick, clean frame with nothing strapped to it to mar the lines…or air flow.

A2J A2Z lightweight custom carbon fiber road bike with integrated electronic shifting controls

The frame is made to accept either traditional mechanical shift cables or Di2, and you can upgrade to the electronics after the fact if you want to get started, uh, on a budget. I write that half chuckling because the base frame starts at €6,000 to 6,500, which includes an Acros integrated headset and MCFK seatpost clamp .

A frameset is available for €8,000 to 8,500 and includes a THM Scapula F fork, THM Clavicula M3 crank and spider, THM Fibula rear brake and MCFK non setback seatpost. Other parts are available and yes, you read that correctly, only a back brake is included because the Scapula fork has an integrated front brake. Complete bikes are also available with whatever you want on it.

Each frame is hand built in Sweden to order with the statement that nothing they make comes from a “low cost environment.”

The frame shown here is the first one out of the mold and comes in under 850g, and it’s only a proof of concept. Production models will have full carbon rear dropouts and carbon front derailleur mount from MCFK. Word is they get one under 700g with bespoke carbon layup, and their “normal” frames have a 150kg rider weight limit (330lbs).

Thanks to Jason at FreshBikes for the tip! All photos from WeightWeenies forum.

The rest of the manufacturer description follows:

How did we achieve this ambitious goal?  Firstly, we assembled our development dream team, ensuring we had all the available knowledge to deliver a class leading design.  With the team?s experience and backgrounds, we had ready access to the most sophisticated and advanced computer aided engineering (CAE) and a thorough understanding of the most advanced composite materials and resin systems.  Our first decision was to make a monocoque frame rather than tube to tube because of the freedom and customization options it would afford us.  We had a clear understanding of how to develop the frames structural requirements that would primarily be geometry, not materials driven.

Among other things, this choice allowed us to optimize the frame?s sectional and transitional geometry as well as the lay-up and thicknesses, placing material where needed, giving us freedom to tune our pre-determined metrics.  This also allows us to tune the metrics and ride characteristics to personal specifications. A personal frame tuning service is therefore available for the most demanding clientele.

With the monocoque frame decision made, we set about the aerodynamics.  Our frame was not designed specifically to be an aerodynamic frame but our aerodynamics engineer spent around a hundred hours on a supercomputer optimizing the sectional geometry.  We have been able to achieve a frame with a significant watt savings over a conventional round tube shape.  The CFD numbers will be verified in the wind tunnel with a rolling floor, a real rider and fully equipped bike later this fall.

The frames carbon layup system is based on a mix of UK company ACG unidirectional and twill prepregs with resin-weave system and Swedish company Oxeon?s Textreme weave.  The 3 piece frames are made by hand, laid over a preformed bladder into polished aluminium and carbon clamshells and baked in an autoclave in Linköping.  Thomas Mertin from THM is overseeing the layup correlation testing at their facilities in Alt Duvenstedt, Germany.  Finished frames are being tested at Zedler Institut für Fahrradtechnik und -Sicherheit in Ludwigsburg, Germany.

As part of the initial specification, our engineers designed the frame to include complete internal cabling, which needed to work with both mechanical and electronic shifting., as well as integrated sensors, internally packaged battery pack and our in-house developed and patented e-shift control system.  Nothing was to be an after thought.

If you run an electronic group, the e-shift system will allow you to operate the gears as a full sequential gearbox with optimized shifting, eliminating, recovery shifting, cross-chaining, and unnecessary shifts on the chain rings.  Select to shift up or down and the ANT+ ? compatible system will ensure you are in the next available gear.

We do not paint our frames as standard.  We feel it is a shame to hide the artisan craftsmanship required to create each frame, however if you prefer a paint finish, we can of course tailor a bespoke colour scheme for you and our master painters will execute a top class durable finish.

We manufacture entirely in Sweden, under our full control, by hand and to order.  Quality and performance are paramount to us.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Neoides
Neoides
12 years ago

Want!! allthough a regular ole 2 x 10 would be better for me personally

Gillis
Gillis
12 years ago

So you don’t have to do the math: €8,000 to 8,500= $11,500-12,200.

moz
moz
12 years ago

Hand built in Sweden. The Swedish bike version of Koenigsegg.
The only road bike that I really like.

Maple Leafs
Maple Leafs
12 years ago

The price for bikes are simply getting ridiculous. Is this because sales of road bikes (especially high-end) have been stagnant lately?

Eric
Eric
12 years ago

Prices of bikes are skyrocketing because there is demand and they are selling. Buyers willing to pay, so mfg are more than willing to sell

fg4
fg4
12 years ago

for 11 grand you should at least get a bike with a chain….

Maple Leafs
Maple Leafs
12 years ago
Andy
Andy
12 years ago

Most likely to be sold to rich guys who will never do this bike justice. Which leads to the question: what’s the point in making such an expensive bike anyways?

AlexK.
AlexK.
12 years ago

I agree – these bikes are ridiculous. But, on some level, you have to remember that the crazy expensive stuff eventually trickles down and makes its way to the masses, but it has to start somewhere. For example, there will someday be a Di105, but Shimano had to start with Dura Ace to recoup development costs.

CasteelG
CasteelG
12 years ago

Man, Porsche’s/Ferrari’s/Aston Martin’s/Lamborghini’s/Bugatti’s/etc are so expensive. Most likely they’ll be sold to rich guys who will never do the car(s) justice. Which leads to the question: what’s the point in making such an expensive car anyway?

moz
moz
12 years ago

@ CasteelG. You are right & I agree with you, but there is a small issue. The car (no matter the make) has an engine + other sophisticated mechanical parts, the bike has nothing. Even a top notch DH bike can’t compared with a mediocre MX motorbike (which is less expensive than the DH bike), let alone a road bike which has no suspension as well as hydraulic disk brakes.
As I commented on an other article, today’s bikes have carbon frames, carbon parts, e-shifting, a plethora of useless gadgets (as if they were pc) & they cost as a 1.4lt car.
It has nothing to do with price, it is about common sense: it is a bike, it can’t go as fast as a car…
I love bicycles because I love nature & adventure. I am not Steve Jobs to need all this pointless gadgets nor Michael Schumacher to need carbon.
However I like this bike because it is handmade in Europe from the country that produces Koenigseggs.

Andy
Andy
12 years ago

Casteelg, good try, but your logic is flawed. First, you need to be really fit and skilled to harness the miniscule benefits of this bike. Anybody regardless of how old or fat can drive a ferrari. Secondly, this is a *bicycle*, not a million dollar supercar. Its power source comes from a pair of lungs and legs, not a combustion engine. And finally, what’s 11,000$ compared to 1,000,000$ anyways? You might be able to get a couple carbon ceramic discs for the cost of this bike.

Jonatan F
Jonatan F
12 years ago

yeah, and how many of the ferari-drivers do the top-speed? Most of them probably just cruise around town on saturdays, for that you could use a wheelchair if you wanted! But – as well as with the cykles – it’s about having the best stuff! Not neceserely use ’em to that level

(pardon bad english – I’m a swede)

Bri
Bri
12 years ago

Are these really made in an autoclave? If so, why not use vacuum bagging. clamshell tooling is usually reserved for platen press curing but doesn’t give as good a carbon product as autoclave due to the lack of vacuum which gives a lower fibre to resin ratio and more prone to resin starvation/voids.
However, if they have been autoclaved then the high price is justified because it gives a better product, higher cost to run and cost a lot more to purchase in the first place, which is why it is usually only reserved for F1 and aerospace where the weight to strength ratio is paramount.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.