Home > Bike Types > Road Bike

Mad Fiber Full Carbon Fiber Wheels… and We Mean FULL Carbon!

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

mad-fiber-carbon-composite-road-bike-wheelset1

Mad Fiber launched these wheels at the Tour of California, and they’re just gone into full production and should be on the market soon. Besides the obvious design differences (look at those spokes!), they’re supposedly just as fast straight on as in crosswinds and climbing…and they tip the scales at just 1085g/set!

Shown above, the first production from Mad Fiber is a full carbon road wheelset. Mad Fiber marks the return of Ric Hjertberg, company President, to wheel manufacturing. Founder of Wheelsmith, Wheel Fanatyk, and previously New Technology Manager for FSA, Hjertberg says, “For me, all roads have led to this. Mad Fiber is the culmination of everything I’ve loved my whole life, and ultimately, it’s about a very simple vision: the dream of creating the perfect wheel. Not with preconceived notions or existing technology, but rather with carbon optimized engineering.”

Joining Hjertberg is Max Kismarton, chief technologist, and an instructor in aerospace engineering with Kansas University. Max is also an engineer for one of the world’s largest aerospace firms, with engineering and production responsibility for some of the world’s most innovative aircraft, both commercial and military. His career success, accomplishments and numerous patents revolve around his ability to develop product that is simultaneously aerodynamic, reliable, and lightweight – and that can be consistently and efficiently produced – making him exceptionally qualified to develop high performance bicycle wheels. (that last bit is directly from their press release. – Ed.)

Make the jump for photos, closeups and specs…

mad-fiber-carbon-composite-road-bike-wheelset3

The front wheel uses a minimal, carbon shelled hub. Technically, the wheels aren’t all carbon, there is an alloy axle running through the body, but it shows off the unique build of the wheels. When they started out, Mad Fiber threw out the conventional notion of how spokes, hubs and rims went together.  Rather than emulate traditional wheels, the wide carbon spokes bond directly to the hub and rim, eliminating the reinforced, high stress areas caused by drilling or molding a spoke bed into carbon rims.

mad-fiber-carbon-composite-road-bike-wheelset5

To create spoke tension, the spokes are first bonded directly to the rims and the flanges, which are initially sitting near the center of the hub. Once those are set, the flanges are pushed to the edge of the hub, which “stretches” the spokes to create tension and lateral rigidity needed to make the wheel rideable. Mad Fiber says this creates a wheel that’s perfectly straight and will never go out of true.

The icing? There’s no rider weight limit, with tests showing them hold up a 600lb static weight. They claim the wheels exceed every standard test by a considerable margin, plus several harsher manufacturer specific tests that various cycling industry folks like to use.

In tests to simulate brake heat, they’ve subjected their wheels to 220º F temps for 120 hours with no effect on the bonding or resin, and they’ve tested structural integrity with lateral (ie. brake pad) forces at 250º F.

mad-fiber-carbon-composite-road-bike-wheelset2

Where the front wheels use a straight pull design of spokes aimed square at the center of the hub, the rear wheel’s spokes create a two-cross pattern by lining up perpendicular to the hub flange.

mad-fiber-carbon-composite-road-bike-wheelset4

The rear hub internals are built by White Industries with a titanium freehub body, here’s their description of it:

Lighter than steel, and more durable than aluminum (no notching from the cogs), titanium may be the perfect freehub material. A three pawl/24 tooth ratchet mechanism strikes the right balance between durability, strength and quickness of engagement. Including the 15mm cro-moly axle (steel remains an exceptional material choice for delivering strength and stiffness when space is limited – like inside a hubshell), White Industries delivers a freehub and axle assembly that makes an excellent, highquality, high-performance complement to the Mad Fiber carbon wheels. It will serve you well for years to come.

mad-fiber-carbon-composite-road-bike-wheelset6

Specifications:
Weight: 1085g
Tires: tubular
Freehub body: Shimano 9/10 or Campagnolo 9/10 speed
Included: Lightweight skewers, cork brake shoes, wheel bags, valve extenders
Warranty: 4 years
Crash replacement program: 4 years
MSRP: $2599

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Bysickler
Bysickler
13 years ago

Oh man, I have $9 in my pocket. MUST find $2,590 more in a huge hurry. WANT!!!!!

Aaron
Aaron
13 years ago

Someone finally had a big think out the square which many wheel builders are still stuck in. This is potentially the future standard for all composite wheels, aero and non-areo.

Brian
Brian
13 years ago

I have a set of these wheels on my bike for two criteriums today and they are SICK. So incredibly light … Quick acceleration. Now, if I get clobbered it will be only myself to blame. But dropping a couple pounds off my wheelset can’t hurt.

garyl
garyl
13 years ago

One word WOW…finally traded in my ZIPP 404s. These not only look cool — but are a significant step up in performance. The braking is significantly smoother (e.g., no “grabiness”) than the 404s and accelerate like, shall I say, Mad. Can’t wait for racing season so I can unleash these bad boys.

Shawn
Shawn
11 years ago

I could put on a set of rusty chrome/metal old as hell Schwinn rims with crackled tires from 1980, on my 1975 Ten-Speed, with caked-up derailers and a rusted chain…and still beat all you guys with your $2500 rims, ha.

Shawn
Shawn
11 years ago

…LOL…jus’ kidding, have a sense of humor

TONI GAGS
10 years ago

Unbelievable… Someone please tell me where i can buy these beauties…

pete d tink
pete d tink
9 years ago

Have you any 4 x 16 tubless rims with bead clamps capable of 4-5 psi with disk hubs and Alphine internals? I may be sick but I want to be the guy who builds the first 49cc trials bike that splats a 4 footer. My last build was awsome 60#’s so how more would this be?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.