Home > Bike Types > Mountain Bike

Elixir Brake Service Update

3 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

If you haven’t seen it already, soon after Sea Otter Pinkbike had this video on updated bleeding procedures for the Elixir brakes posted on their site. The video is of none other than SRAM’s own technical wizard Chuck Perryman going over a few new additions to the previous Juicy bleed procedure which has now been tailored to the Elixirs. While overall a great product, many Elixirs had been affected by unreliable performance especially with the rear brake.

However, it seems that brakes that had been bled using the old procedure were suspect to feeling OK at the shop, only to have stubborn air bubbles hiding underneath a seal in the lever work their way free causing poor lever feel while riding.

Think this is happening to you? Maybe, but it could be only part of the problem…

RE-BLEEDING RESULTS:

First off, I’m happy to say that after using the altered procedure to re-bleed many problematic brakes on our shop’s customers’ bikes, the results have been outstanding. Even brakes that showed no signs of issues other than having not-so-positive brake lever feel have been vastly improved. Personally I recently received a set of Elixir R’s on my Fuel, and although the brakes had worked fine for the first two rides, I decided re-bleed them and was pleasantly surprised with the results in regards to performance. Both brakes had extremely positive feel to the lever, equal pull, and decreased drag on the rear brake.

The left syringe is the stock fluide from the rear brake.
The left syringe is the stock fluid from the rear brake, on the right is new 5.1 fluid.

SURPRISE ISSUES:

It wasn’t all good news though, as the fluid I removed from the two brakes was questionable at best.

The fluid I pulled from the rear brake was much darker than fresh Avid DOT 5.1 fluid, and seemed like it has a different density than the fresh fluid it mixed with in the syringe. It was easy enough to replace, and between the new fluid and the proper bleed the brake felt great. On the front brake the fluid was the right color and consistency, although it had gum-like solids floating in the fluid (shown below). Again, I’m not quite sure what it was but I thought it best to remove it from the system.

Brake fluid from the front brake.
Brake fluid from the front brake.

So what can you take from this? Well, it definitely seems the Elixirs have had a bumpy ride into the public arena and not without warrant.

If you’re having issues with your Elixirs, it’s likely they just need to be re-bled using the proper method. If you don’t feel competent to bleed your own brakes, then take your bike into the local shop and be sure to mention the new video…and have them double check the fluid itself for any of the issues shown here.

To SRAM’s credit, whenever a company is manufacturing components overseas it is nearly impossible to keep tabs on all materials used and processes implemented. Talk with any product manager (Editor’s note: In just about any industry) and they will tell you horror stories of how one of their suppliers switched material spec on them to cut costs. What’s important here is that SRAM has stayed SRAM and provided top of the line warranty service and support to insure Elixir owners are happy.

All said and done, my Elixirs are now performing the way they should. The brakes continue to have great modulation and incredible power, and after quite a few miles on the new set up I am extremely satisfied with the results.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

3 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Mikey
Mikey
13 years ago

I am shocked that it took so long to issue a bleed procedure for the elixers.. I’ve owned the CR’s for almost a year now and have been doing it the old way cause everyone always said to just do it the same as the Juicy’s… Luckily, I am a brake bleed bada$$ so the feel was good, but there was always some slight noise that I could hear that bothered me. I will definitely be trying out this new procedure along with completely replacing the fluid. The CR’s were a great improvement over all my previous brakes, but I’m just disappointed that I have not been able to use their full potential due to this huge oversight by Avid.

Alex
Alex
13 years ago

Can anybody tell what amount of brake fluid do I need to replace it all in front and rear brakes?

rob c
13 years ago

its great to see SRAM / AVID step-up and finally admit there was a problem with bleeding the rear Elixir disc brake

I have been using Avid disc brakes for a while now….4 years on my Avid Juicy 7 brakes with NO issues, a solid, reliable disc brake and easy to bleed using my “hybrid” method – Avid syringe / fittings at the caliper end, and a “catch bottle” with fittings at the lever end = 100% reliable / solid bleed every time!!

this also worked for the more basic Elixir R

however, with the Elixir CR you had to go back to the Avid “method” as the different location of the brake lever bleed port, and construction on the Elixir CR meant my Juicy method would not work on my CRs, and you would get a soft bleed which would feel “soft” initially and then get firmer into the ride as the DOT fluid temperature rose……

big fan of Avid brakes, but not a fan of the Elixir CR compared to the older Juicy or the newer Elixir R brakes 😉

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.