Home > Bike Types > Mountain Bike

Unveiled! All-New Orbea Alma 29er Carbon Hardtail Mountain Bike

4 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

orbea-alma-29er-carbon-hardtail-mountain-bike

When the original Orbea Alma 29er debuted at Sea Otter in 2006, it was the first production monocoque carbon 29er anywhere.  Some four years later, they’ve completely redesigned the frame, and it’s gorgeous. This time, the new bike is making its world debut at the Mellow Johnny’s Classic this Memorial Day weekend.

Billed as a 2011 model, the new Orbea Alma 29 takes a lot of the carbon frame technology from their similarly shaped Alma 26″ hardtail, like the Size Specific Nerve (SSN), which means each frame size has a different carbon layup and structure based on the different rider weights and strengths likely to be on various sizes.

They worked with Gore to develop DCR Cable Routing, part of which is the sexy machined cable guides you see on the headtube in the photo above.

Performance-wise, the new frame uses a BB30 bottom bracket, tapered headtube, shortened chainstays and a curved seat tube.  All that, and they dropped 150 to 200g from the original frame (depending on size).

Make the jump for full specs, builds and pricing…plus closeup and full bike photos…

orbea-alma-29er-carbon-hardtail-mountain-bike2

Click on any pic to enlarge to Giant size.  The 2011 Orbea Alma 29er will be available in three sizes and two paint scheme, white and black, as shown here.  Additionally, there are four build kits.  Specs and geometries are at bottom of this post.

orbea-alma-29er-carbon-hardtail-mountain-bike3

No word on a single-speed version at the moment.  Note the alloy cable guides on the seatstay (above) and top tube (below).

orbea-alma-29er-carbon-hardtail-mountain-bike5

Even the seat collar is fast!

Xavier, Orbea’s product designer, explained the design: Notice how the chainstay lines up below the axle and the seatstay lines up over the axle…if you drew a line along them, they would intersect behind the axle. Then notice the bend in the top tube.  These changes serve more than just cosmetic purposes. It allows for larger separation between the chainstay and seatstay, which creates a laterally stiffer bike and, because it creates a slacker seatstay angle, it provides a more comfortable ride.  On the front end, the design actually contributes to front end stiffness as well.

orbea-alma-29er-carbon-hardtail-mountain-bike4

The downtube has a ridged shape on the bottom, curving inward in the middle, that comes down to almost the full width of the BB30 bottom bracket shell.  Massively tall chainstays, the extremely fat downtube and tapered headtube should make for a very, very stiff bike.

orbea-alma-29er-carbon-hardtail-mountain-bike7

orbea-alma-29er-carbon-hardtail-mountain-bike6

Four complete bikes will be offered, specs above.  Orbea has not released pricing on the complete bikes since they’re still waiting on final pricing and availability of 2011 components, but a frame-only option will have an MSRP of $1,799 and should hit dealers mid-July.  200 units are in production now.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jeffrey
Jeffrey
13 years ago

The S30 model appears to be stocked with next-gen 2×10 XTR. Exciting proof of what has been suspected! Interesting that the crank will be 26/38, though…

Dirk Schnase
Dirk Schnase
13 years ago

The top of the seattube sits barely above the line of the toptube.
Looking at the geometry table I see a Large has a seattube of 520mm.
This would place the toptube higher than other 29″ specific bikes from competing company’s.
and hence more standover height due to this ‘crooked’ toptube-design??

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.