Home > Other Fun Stuff > Prototypes & Concepts

DH Sneak Peek: Next gen Quadiem prototype 4-piston downhill brakes from TRP

3 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

TRP_next-gen-prototype-Quadiem_4-piston-DH-brakes_Aaron-Gwin-new-caliper-back

Over the weekend at the DH World Cup we spotted a set of next generation 4-piston brakes from TRP on the race-winning bike of Aaron Gwin. The new brakes  look to borrow heavily from the layout of the existing Quadiem SL, but with a caliper body that is even more trimmed down and opened up for what looks likely to offer a lighter setup with improved cooling. Although the brakeset looked very refined, it was clearly a prototype and devoid of any branding on the caliper itself. Gwin had only one set of the brakes set up to ride, with his B bike built with current Quadiem SL’s and his custom lever blades. Take a closer look below the fold…

TRP_next-gen-prototype-Quadiem_4-piston-DH-brakes_Aaron-Gwin-new-caliper-front

The prototype 4-pot brakes use the same architecture as the current Quadiem SL, but it looks like the forged two-piece body then gets machined down to reduce weight. Additionally a series of grooves are machined in that could likely aid in cooling. A good bit of material is removed off of the top of the brake and the window to the pads opened up as well, also likely to improve cooling and shave weight.

TRP_next-gen-prototype-Quadiem_4-piston-DH-brakes_Aaron-Gwin-new-lever

On the lever side, the prototype brakes were attached to a standard pair of  TRP Quadiem SL lever bodies that even kept the stock logos. Gwin prefers a longer flatter brake lever though, so his Quadiem SLs drop the stock two-finger carbon lever and replace it with a custom machined alloy one. The replacement lever is actually available now from TRP for those who want to get the same feel at the World Cup leader. TRP takes the longer straighter alloy lever from their Slate XC brake and machines it to fit the Quadiem bodies. The levers get a dimpled outer to give plenty of easy grip in the mix of conditions a DH pro is going to encounter.

TRP_Quadiem-SL-4-piston-DH-brakes_current-lever TRP_Quadiem-SL-4-piston-DH-brakes_current-caliper

Gwin’s back up bike was built with current TRP Quadiem SL brakes, and his own signature lever upgrade kit.

TRPBrakes.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

3 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Nick O.
Nick O.
7 years ago

Good to see some new stuff coming out. I always heard bad things about TRP hydraulic brakes, but I still went with their Hylex for CX and have used the Slate T4 for quite a while. They have worked quite flawlessly. My main mtb brakes are Shimano, but I can’t really say anything bad about the TRPs in comparison…except maybe the longer levers on MTB (which apparently some people like). The Hylex are pretty much the most perfect drop bar brake I can imagine…ergonomics, lever feel, etc.

jdog
jdog
7 years ago

Part of me thinks he could ride anything and win.. The other part of me loves the longer lever than that of the others out there. Not going to jump and buy these, but I’d love a go.

ERIK
ERIK
7 years ago

i am running the current Quadiem and they are really good… they stop the bike of course, but i like them most because they are not super progressive and on-off feeling like shimano… they have a very linear feel and a bit more lever travel between initial bite and full lock-up so the modulation is great… and they are good looking… which helps…

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.