Home > Clothing-Gear-Tools

Just In: The ultra-adjustable BOS Deville TRC Enduro fork & Kirk 2 rear shock

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2016-04-19 0P1120012

BOS suspension, based in France was established in 1999 and has a similar, albeit much shorter history to that of Öhlins as far as being a manufacturer of high-end suspension in motor-sports… except that BOS actually started out in bicycle suspension. Founder Olivier Bossard started BOS for the purpose of improving a stock mass-produced fork’s damping and in turn assisted many in becoming world champions in downhill and XC. His talents in suspension damping then led him to motor-sports and away from bikes with many wins including a World Rally Championship.

Getting back into the un-motorized sports (insert e-bike jab here), BOS went all out as they felt their dampers needed a deserving chassis. They sent us the revised Deville TRC, (we got one of the only ones in the wild… it’s #009 off of the assembly line), that has some interesting tech without any of the excess “modes” found on most others. We also got our hands on their highly acclaimed KIRK 2 three-way shock that has the same abundance of tune-ability…

2016-04-19 0P1120029

Having had quite a successful and well-established presence in Europe, despite their worthy performance, the biggest thing holding them back in the US was a lack of parts and service centers to maintain them. To remedy that, BOS has set up shop with QBP’s service center to provide easy to obtain parts and service. Currently most parts are in stock with more on the way. Shops and tech-savvy consumers can purchase parts to perform basic services and complete services will need to be sent in. According to QBP’s service department, there is an average 4 to 5 day turn around on all service, and for a slight up-charge, they offer a 2 day “Premium Service” turn around.

Deville controls

If you’re looking for a turn-key fork that you can pretty much just air up and go… this is not it. The Deville TRC fork ($1,200), is designed to be properly tuned. There is no lock-out or “ride characteristic” modes. Rather than using a sealed damper cartridge, BOS uses an open bath design using shims like that of motorcycle forks. Adjustments include the TRC (Twin Rate Curve) switch, rebound and high & low speed compression. This may sound complicated, but it’s really rather simple as you set and forget and only make small adjustments if need be on different trails.

The TRC switch (L) ramps up the fork’s compression & rebound (it gets firmer in both directions) as well as limits the fork’s travel to 110mm (but will give up 130mm if you hit something big). I don’t get along with lockouts, (unless on a long road), as the suspension still needs to do its job if the climb is anything but concrete smooth, (that and I forget to unlock it sometimes). The TRC sounds like something I could live with since there is little compromise so I’m looking forward to see if it works as good in practice as it sounds in theory.

Rebound (C) is pretty much just that… it’s when you turn the fork over you see the business end. The two knobs, though enticing, it’s worth doing a little research before messing with these. The high & low speed compression (R), controls the speed at which the fork reacts under compression. Slow speed compression controls things like pedaling forces and gradual changes in the terrain, but needs to be adjusted to keep the bike from suffering from too much sag while riding so it can use the optimal amount of travel when needed. High speed compression controls the speed of the fork over sharper bumps like roots and squared edges. Blindly messing with these can mess things up, but luckily, BOS provides a great set of recommendations for all of these and even has air pressure recommendations for both recreational and racing use.

2016-04-19 0P1120025Deville thru

I’ve always like’d BOS’s thru-axle as the simple effective design doesn’t require a massive amount of tightening down to hold it in place. Even better the few people left out there hurt over the death of the 20mm thru-axle on sub 7-inch travel bikes can rejoice as the Deville’s lowers are made for a 20mm thru axle and uses an nifty little adapter so it will work with the more common 15mm thru-axle.

2016-04-19 0P1120018

The Kirk 2 three-way piggy back shock ($850), has the same rebound and high & low speed compression adjustments as the Deville as well as a switch that locks out the low speed compression to aid in climbing. You can also add volume spacers to change how progressive the shock’s curve is.

Deville kirk weight

The weight of the Deville came out 75g above the claimed 2050g, but that is including fluids and the thru axle. The Kirk 2 three-way came in at about 50 grams under the claimed 450g. Overall details of the fork and shock are superb and I’m looking forward to seeing how it performs on my Banshee Spitfire that is currently running a Pike and a Cane Creek Double Barrel.

BOSmtb.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
PRoDiGY
PRoDiGY
7 years ago

Maybe is the case also for Europeans to service Bos products is the US, as the factory in Toulouse is a disaster. 🙂

J N H
J N H
7 years ago

Well giving QBP all the parts explains why there are no spares for Kirks in the Europe right now and haven’t been since before Christmas. As the owner of a Deville and a Kirk I can wholeheartedly warn everyone else off BOS.
.
When it works the performance is second to none, however the moment something goes pop (and it will) you will be armed with a paperweight for months, not days. This has been the case through four UK distributors since 2012 (when I bought my suspension) and shows no sign of changing whatever noises come out of Toulouse. My next bike will have a DVO fork and a CCDB, but that has to wait for spare budget.
.
Apologies for the negativity but I expected better from £1500 worth of suspension hardware.

bearCol
bearCol
7 years ago

110×20 makes more sense on a number of levels. I’m glad a number of companies offer it. I’ve still yet to buy anything 100×15 and probably won’t have to. Not that it’s a big deal performance wise, it just annoys me when the industry changes things up for no good reason.

TheKaiser
7 years ago

From the article:

“Slow speed compression controls things like pedaling forces and gradual changes in the terrain, but needs to be adjusted to keep the bike from suffering from too much sag while riding so it can use the optimal amount of travel when needed.”

You’re really baiting the suspension know-it-alls Trey playing fast and loose with your use of the term “sag” in relation to compression damping, and especially in an article on a super techy product like BOS. As any number of them will be glad to tell you, compression damping won’t change your sag, it will only alter how quickly the bike sinks down to the sag point. Now if you were to instead say compression damping alters the dynamic ride height, you might have a leg to stand on…

“I never found reducing the suspension’s travel on a climb worthy as it always felt the change in geometry buried the front end and slowed me down.”

Many people have observed this feeling with travel reduction forks, and I have felt it myself, although I have never seen a good explanation as to if it is real or just a sensation. There is no reason that I can see that switching from an enduro to XC geo by dropping your fork should slow down climbing. If anything, it should do the opposite, if we assume that XC race bikes are optimized for climbing.

MKJ
MKJ
7 years ago

J N H, did you have regular service performed within the recommended service interval?

J N H
J N H
7 years ago
Reply to  MKJ

Forget the recommended service intervals. For reliable operation both ends need servicing at least three times a year. BOS recommended service interval is 2 years, which like their customer service is pure fantasy.

Chris
Chris
7 years ago

‘Rather than using a sealed damper cartridge, BOS uses an open bath design using shims like that of motorcycle forks’

You should really fact check this stuff. Open bath on motorcycle is mostly offroad. Motocross and higher end forks use closed cartridges. All use shims, as do almost all MTB forks.

Rich
Rich
7 years ago

“The TRC switch (L) ramps up the fork’s compression & rebound (it gets firmer in both directions) as well as limits the fork’s travel to 110mm (but will give up 130mm if you hit something big). ”

Unfortunately this statement is completely incorrect.
TRC does nothing to the damping of the fork.
TRC simply closes off part of the main air chamber making the fork much more progressive with less available travel.

From the BOS Site itself:
“The TRC system (Twin Rate Curves) can change in an instant the volume of the positive chamber of the spring and thus the escalation of the fork. With the TRC activated, the fork becomes firmer for better performance. It also keeps a higher base in the slope.”

Gunnar Westholm
7 years ago

Is there any shock on the market today that got TRC switch or similar adjustments of Spring Rate Curve / Progressivity?

How does the Dual Air chamber shocks like Scott, Canondale or Trek uses compares to BOS TRC switch?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.