Home > Bike Types > Cyclocross

New Lauf Grit leaf spring gravel road bike fork tames the road less traveled

lauf grit gravel road bike leaf spring suspension fork
26 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

lauf grit gravel road bike leaf spring suspension fork

Taking their short travel carbon leaf spring suspension fork design to a wild new frontier, the Lauf Grit gravel road bike fork gives your drop bar bike a new, adventurous life.

The Grit uses the same overall design as their Trail Racer XC fork, but it cuts the travel in half, offering just 30mm of suspension. It still uses their virtually unbreakable carbon composite leaf springs, but in a different tune. The idea is to take the edge off those pot holes, washboards and rocks while keeping your bike fast and light. Judging by the photos here, Lauf’s volcanic Icelandic terrain provided the perfect inspiration and proving grounds.

lauf grit gravel road bike leaf spring suspension fork

The Grit has an effective axle-to-crown of 409mm, which is calculated with 6mm of sag accounted for. While that number is a bit taller than the stock 395mm to 405mm A-to-C measurement of the bikes it’s meant to go on, that was intentional. First, it had to clear some fat tires, up to 700×42 or 27.5×2.1, when fully compressed. Second, it’s designed to turn your ‘cross racer into an all-day (or multi-day) adventure bike, for which a slightly longer wheelbase, more relaxed head angle and taller front end makes sense.

We spoke to Lauf about this in detail over the past few weeks, and here’s their (slightly paraphrased) commentary on it:

To summarize how our design works out for the ‘standard’ 395mm CX bike, the effect of Grit on the geo would be:

  • Standard fork geo: A2C 395 – HA 71.0° – Rake 45
  • Grit resulting geo: A2C 409 – HA 70.34° – Rake 47

So as you can see, the HA change is less than you usually see between different sizes of the same frame from the same manufacturer, where the norm is a HA range of a full 1° between sizes. We increased the rake from the ‘standard’ 45mm to 47mm to maintain similar trail (only +3mm) without lengthening the wheelbase too much. If we had gone for a maintained trail (by pushing Rake up to ~50mm) we would have gotten a pretty long wheelbase at the same time, while we wanted to stay closer to the original geo of the donor bike in general, not just Trail wise. But these are just details that can probably be compensated for with your fine-tuning of the setup of the bike (read: stem length, saddle position, etc.).

We’ve tested with excellent results on the Niner RLT9 Steel, Trek Boone and Norco Threshold.

lauf grit gravel road bike leaf spring suspension fork

Here are the official specs:

  • Travel: 30mm
  • Weight: 900g with 210mm steerer and including axle
  • Axle to Crown: 409mm* (with 6mm of sag)
  • Rake: 47mm*
  • Axle: 12x100mm or 15x100mm
  • Brakes: Flatmount for min.160mm discs
  • Steerer: Tapered 1 1/8” – 1 1/4 “ (adapter for 1.5” included, adapter for 1 3/8” available)
  • Tires: Up to 700x42c / 27.5×2.1
  • Rider weight limit: 110kg/242lbs

*For maintained steering characteristics from a 45/395mm rake/A2C rigid fork

lauf grit gravel road bike leaf spring suspension fork

lauf grit gravel road bike leaf spring suspension fork

The Grit has been in development and testing for about a year, with folks from Niner, Salsa, Ridley, Open, Haro, Framed, Marin, Lamere and Engineered bicycle brands all praising it. No word on whether you’ll see OEM spec from those brands yet, but we wouldn’t be surprised if it was at least an upgrade option on some.

lauf grit gravel road bike leaf spring suspension fork

Here’s how it fits into their lineup. The weight savings comes mostly from the shorter overall stature and 20% shorter spring leafs. Other differences, as explained by Benekikt Skúlason, Lauf’s CEO and founder:

“The key difference is obviously the shorter Axle to Crown (in part facilitated by our thinner-than-ever-before crown design, compared to our previous forks) and the shorter travel. Making our technology fit into the geometry and riding style of Gravel/CX. Then there are details such as flat-mount brake mounts and 160mm disc compatibility (compared to 180mm for the TR). This fork is also designed using what we’ve learned from the TR29 and the TR Boost, in a nutshell, it uses the deeper fork leg design from the TR Boost to get better front/back stiffness and it has the improved cable routing of the TR Boost as well.

Aside from these technical differences/improvements from the original TR, the key is how perfectly our technology fits into this segment. For XC, the TR forks offer very clear pros but some riders definitely want more travel and rebound damping in that segment. In XC we are the in-between solution. Between rigids and full-on suspension forks.

For Gravel/CX however, for the short travel required/desired, the technical pros (responsiveness, lightweight, maintenance-free, energy efficiency) shine brighter than ever, and the cons are eliminated (no damping, meaning that long travel suspension does not work with our technology does not matter at all here). We simply can’t see how a traditional suspension fork can match the performance of the Grit.”

lauf grit gravel road bike leaf spring suspension fork

The Grit is aimed at the fast riding crowd rather than the bikepacking/touring cyclist. There are no rack or fender mounts, and here’s why:

“That’s a slightly different market,” says Skúlason. “Those who prefer their gravel bikes to be fast and light (and clean looking) would see it as a turn-off. It’s always going to be quite significant added weight, and it simply doesn’t appeal to those who like things fast and light.  Maybe we’ll do something like that in the future though, as we believe it makes perfect sense.”

But, it will work with the D.Fender. Here’s how it looks on a couple other bikes:

lauf grit gravel road bike leaf spring suspension fork

lauf grit gravel road bike leaf spring suspension fork

lauf grit gravel road bike leaf spring suspension fork

The fork will be available starting in August and retail for $790. The official launch is at Sea Otter Classic, and we’ve just received our own pre-production Grit for testing. Stay tuned for first impressions…and check out our Lauf HQ tour to see early prototypes and testing of their forks.

LaufForks.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

26 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Durr
Durr
7 years ago

lol, or get a Surly Cross Check for the same weight.

JH Aberschmidt
JH Aberschmidt
7 years ago

wait, wuht?

MaraudingWalrus
7 years ago

I’m super stoked about this.

wallymann
wallymann
7 years ago

@pete…how does this leaf-spring design damp suspension movement w/o any damping mechanism?

wallymann
wallymann
7 years ago
Reply to  wallymann

ah, i checked out the previous review:

One of the questions most often asked is how something with no damping can ride well, to which they say the material isn’t like a metal spring that snaps back instantly. Rather, these return slightly slower and in a more controlled manner. It’s still quick, and slow riding can give the impression they’re bouncy, but at speed it does its job of smoothing the terrain and taking the edge off.

Pete
Pete
7 years ago

As a customer who paid for 2 Lauf trail forks, IMO for their intended purposes (obviously not Enduro or DH) they’re the best thing going. They replaced Fox & SID forks on my XC bikes.
Tracking is straight & true, and no, you don’t need a damper with this design, the multiple leaf springs are brilliant. This gravel fork is my new next buy.

Bikeryder85
Bikeryder85
7 years ago

I have always felt that this is where these forks belonged. This looks like a great match for bikes with IsoSpeed or similar. Looks great

GravelRider
GravelRider
7 years ago
Reply to  Bikeryder85

They are not stiff enough for a true XC fork but I think this could be a killer setup. I always liked the idea, now I am actually considering one for my adventure/gravel rig. It looks great on the Open and the Norco, well done with the paint match.

JBikes
JBikes
7 years ago

What is “XCM”?

And on a side note, I’d think CX and Gravel would be in the same category, instead CX is slotted between Road and Gravel, which is strange. Not great on short steep standing climbs?

JBikes
JBikes
7 years ago
Reply to  JBikes

Ah…XC Marathon. Nevermind

Heffe
Heffe
7 years ago

Very cool.

Padrote
Padrote
7 years ago

ironically, the people in the “fast riding crowd” are not going to be the ones buying this

Padrote
Padrote
7 years ago
Reply to  Padrote

it weighs almost as much as an entire carbon CX frameset

WannaBeSTi
WannaBeSTi
7 years ago
Reply to  Padrote

Padrote, I’m with you on the weight. I like the idea for CX use, but I’d hate to carry any more weight than I need to for a CX race.

BH
BH
7 years ago

Is it weird that I’d rather just have a Softride stem?

James Thompson
James Thompson
7 years ago

Interested in buying one of these but I’m afraid my friends would Lauf at me.

Robert Kennedy
Robert Kennedy
7 years ago

Haters and all that. I’d buy one in a heartbeat if I had the $. Lauf, if you want to represent at the Cedar City Fire Road Race and the Crusher in the Tushars, lemme know. I can pay you in… /checks wallet… Love?

PFS
PFS
7 years ago

I dont play golf or perform dentistry (or really ride all that fast) but if it performs like the XC version I have then I will more than happily buy this one. I do with that it had some anything cage mounts but that isnt a deal breaker.

JBikes
JBikes
7 years ago
Reply to  PFS

Golf and dentist comments = too expensive for my needs/wants/budget, so I’ll denigrate those that differ and have the ability to purchase so I can feel better about myself.

By all intents and purposes, the product works and works well for its intended use. Whether it is worth it is a personal matter.

Rick
Rick
7 years ago

Think Klein Mantra people…

will
will
7 years ago

I like the concept of these forks, but I can’t get past the look. Or the cost. Yet another expensive product I’ll probably never even see in person…

Ivan
7 years ago

(deleted)

Tom
Tom
7 years ago

They’ve got the function, now they need to improve the aesthetics and weight a bit more.

Waiting patiently.

Ryan
Ryan
7 years ago

Looks like it might be quite functional, but frankly, it’s so ugly that I’d never want one. I just don’t need suspension if it looks like this.

Rick
Rick
7 years ago

You’re spot on Ryan.

Dennis DeRosa
Dennis DeRosa
6 years ago

I’m looking at this for CX racing… which I got into from XC mountain bike racing… and the main thing that affects me riding/racing CX is pedaling over bumpy grass…. where I tend to coast over such because it’s way too bouncy…. this is where I feel a relatively light suspension system like the Lauf Grit would work…..

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.