Home > Clothing-Gear-Tools

TPE16: Chosen’s crazy quick engaging & silent hubs plus Shutter Precision now in new electrifying sizes

17 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Hubs P1100365

Chosen had some pretty shiny things in their booth this year, and as good-looking as they are, the real beauty is hidden inside. Their new super fast engaging hubs come in plenty of varieties, and the new silent hub all but eliminates friction. Also in other hub news, Shutter Precision expands their popular dynamo hub sizes to fit more of your adventuring needs…

Hubs P1100359 Hubs P1100361

Chosen’s 150T hub has… you guessed it, 150 teeth on the drive ring. Add to that 3 pawls with 7 teeth each and you get an instantaneous 2.4° engagement! That is slightly faster than Chris King, and again even I9’s 3° Torch hubs. They will be available in both road & mountain versions, with mountain versions using either straight-pull or j-bend spokes and the road hubs in straight-pull only.

Hubs P1100367 output_zWTZW5

Also lurking on their shelf in Taipei was their new Silent Hub. Though undeniably quiet, the key advantage to this hub design is that the pawls are taken completely out of the picture as you coast leaving only the friction of the bearings and seals remaining. As you can see in the animated image above (right), as soon as you pedal, the cassette body snaps the pawls into position and you’re off! These silent hubs will also come in straight-pull only for road, and for mountain will get both straight-pull and j-bend options.

Chosen-Hubs.com

Shutter Per

Shutter Precision showed us a prototype of their 150mm dynamo hub last year and it looks like they’re ready to go to market now. Also they tell us they will have a 110 Boost hub ready soon, so those riding with the new standard up front will be able ride all night long powering lights and charging gadgets. Both hubs run on the 6v, 3watt standard and will be distributed through Cycle Monkey and Merry Sales in the states.

SP-Dynamo.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

17 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Me
Me
8 years ago

Is that a LEGO brick mount on the dynamo?

Tyler Durden
Tyler Durden
8 years ago
Reply to  Me

It’s a pretty standard receiver for the wires that are routed to the light. At least I think it’s standard – it looks a lot like Shimano’s version of the same thing.

typevertigo
typevertigo
8 years ago
Reply to  Tyler Durden

Yep, as far as I can tell Schmidt’s SON dynamo hubs use the same connection.

It’s actually a male-female coupling where the Lego brick is the exterior of the male plug. The Lego brick nubs are where the insulation of the wires end. The bare wire continues on and wraps around the end of the plug, which goes inside the female socket of the hub.

br
br
8 years ago

The text on the hub says Silence Hub, not Silent.

Wired_for_Watts
Wired_for_Watts
8 years ago

That LEGO brick works better than another twice-as-expensive well-known European brand’s connection.

aMTBicyclerider
aMTBicyclerider
8 years ago

It’s a pawl based freecoaster then? Eclat made the blind hub, and Ezra make one similar, the salt plus trapez is just an Ezra clone. My point is it’s nothing new, just a system that already exists, which is pretty poor, made in a mtb compatible package. The problem with this is the stupidly poor engagement, you have to wait on the free hub lifting the pawl, then the pawl engaging in the ratchet. I doubt there is any demand for such a hub.

myke2241
myke2241
8 years ago

Man I really wonder how these really work in the real world!

Needn't Motor Eugene
8 years ago

150T – just try to imagine how it howls!

Bicyker
Bicyker
8 years ago

Or skip…

TheKaiser
TheKaiser
8 years ago

Imagine how many engagements they could get if they made those teeth even smaller! Like a microscopic file pattern. You could essentially get an instant engaging hub. Kidding in regard to the practical application of that one of course…once the teeth get tiny they’ll be less tolerant of wear and contamination, my point being that I wonder where this design falls in regard to that spectrum of real world usability.

myke2241
myke2241
8 years ago
Reply to  TheKaiser

I’m guessing your not going to get 6 months of hard riding out of these before they start slipping.

Ed
Ed
8 years ago
Reply to  myke2241

Halo have a similar multi toothed pawl on their supa drive hubs, they work, they have excellent engagement and they’re loud as hell. Never had a problem.

me
me
8 years ago

if we want instant engaging, why not this concept?

Kernel Flickitov
Kernel Flickitov
8 years ago
Reply to  me

Onyx hubs use a one-way sprag clutch as their driving mech. Instant engagement and totally silent!

onion
onion
8 years ago

Roller clutches are used instead of ratchets in Alfine hubs also; while a great technology, they haven’t made a big impact into road bicycles because they’re quite heavy.

Kernel Flickitov
Kernel Flickitov
8 years ago
Reply to  onion

They’re about 100g more than standard hubs, plus It’s the center of the wheel so it doesn’t apply to rotational weight. If you can’t deal with 100g you need to train harder.

confuseded i guessed
confuseded i guessed
7 years ago

Where can someone eveb buy these? The Chosen website is garbage and all I can find are the road version…

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.