Home > Clothing-Gear-Tools

TPE16: Praxis Works goes carbon, shows gravel ready micro-compact rings, chainguide and MUCH more!

15 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Use P1100165

Praxis has been busy the past few years growing what started off as some worthy aftermarket chainrings to now making some really nice cranks, BB’s, and even their new wide-range 10 speed cassette. That said, they showed up to Taipei with a lot of serious, well thought-out (as usual) new products.

Check out their Lyft carbon mountain bike cranks, new road cranks, micro-compact rings gravel-heads will love, a chain guide, plus much more…

Use P1100147

Front and center was this subtle yet striking carbon goody. From a company that is known for putting a lot of attention into the details, I anticipated I would be impressed with just about everything they had to show, but “carbon” was not on the list of what I was expecting.

The new Lyft carbon mountain bike cranks use a 3-bolt direct mount that will work with BOTH their non-boost (49mm offset) and Boost (52mm offset) rings. The Lyft crankset will come with their new M30 Thru Series BB and will work with interchangeable BB90/92, BB30, or PF30 spindles, (think Cinch). Adam from Praxis said they’re shooting for early June availability and retail pricing should be in the $500 range. The standard Lyft crankset will come in both 175 & 170mm lengths, and they are also coming out with a Lyft HD crankset (170mm only) that will use the same mold but constructed with a stronger carbon lay-up and even beefier spindle. Weights are said to be at or better than those from other carbon competitors.

Use P1100146

Speaking of bottom brackets, their M30 BB now sports an alloy pre-load ring. It’s made of aluminum rather than plastic so there is less chance of stripping with that tiny locking screw, which tended to be a common occurrence on the plastic ones out there.

Use P1100149

With a new premium trail crank in their line-up next to their current hollow-forged crankset, the new Cadet cranks come in at “good” on the good/better/best scale. Though a great entry-level upgrade for those wanting a direct mount, it also will serve as an attractive offering to the OE market.

Use P1100157

Jumping over to road, their new cold-forged Buzz rings make it easier to fit most road cranks. What makes these rings special is that they will work with both 5-arm visible and 5-arm/4 visible (SRAM EXO) cranks. While Buzz will be coming as standard fare on their Zayante cranks (above), the Zayantes will also be available in 1X configurations.

Chain pin

The trick to being multi-compatible is the two placements options for the catch-pin. The chainrings come with both a long and short catch pin that can be located at either end of the chainring depending on the cranks they are going on and how thick the arms is. We offered a peek at them back at Eurobike, but it has gotten more refined now.

Use P1100164

To keep things clean, the buzz rings come with a plug to place in the threaded hole you’re not using. This not only makes it easier trying to figure out what rings to buy, but also makes a great option for shops as they won’t have to worry about stocking as many variations of rings.

Micro

Also new are the new non-hollow Alba cranks, which we also previewed back in September. Like the Cadet cranks, they will be a viable option for those wanting a good crank as an upgrade or as a high value option for the OE market. Shown here with their new Micro Compact rings, gravel riders will appreciate getting down to a 32 tooth ring thanks to the stepped mounting tab machined down to allow enough space for the chain on that tiny gear.

Yep, that’s a 110BCD road ring setup that gives you a tiny 32 granny gear, while pretty much everyone else doesn’t go below a 34 because of the chainring bolts and tabs of the spider otherwise hitting the outer plates and rollers of the chain with a gear that small.

Use P1100170

The Alba cranks will also be available in direct mount and the rings are designed so that a powermeter can be added.

Chain guide

Last but not least, they have a nifty, easy to use chain guide coming out. One 4mm bolt allows you to adjust the height. Once fixed, you can then adjust the in/out and angle without have to remove the cranks.

PraxisCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

15 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Rixter
Rixter
8 years ago

Praxis puts out some great products. I really love the quality of their chainrings on my bike. Super smooth

pgm
pgm
8 years ago

Nice work Praxis. Seriously well thought out stuff. I wish I could squeeze out the power for those TT rings you also make.

Heffe
Heffe
8 years ago

Praxis is just the best. I can’t wait to see them expand their range even further.

Antipodean_eleven
8 years ago

Great stuff designed by some great people.

STS
STS
8 years ago

If you tend to turn your heel inwards the Zayante is one of the worst designed cranks on the market. And limiting crank lengths to just 170 and 175 mm is poor for a company specialized in cranks and chain rings. What about riders with longer or shorter legs?

WannaBeSTi
WannaBeSTi
8 years ago

STS, you’ve ridden a Zayante crank?

STS
STS
8 years ago
Reply to  WannaBeSTi

Yes, I did. I’m the owner of a shop doing a lot of custom build-ups. Some customers ordered the Zayante and two of them wanted those cranks to trade-in afterwards because they touched the crank arms with their shoes when wearing booties. After installing Sram Rival cranks this problem disappeared.

Eddy
Eddy
8 years ago

When & where can I get that granny gear 32 ring for my Force 22 crank on my adventure rig? I’ve been looking for something to replace the compact 50/34 on there now to help get up some of the steeper and longer grades we venture upon out west here.

Kingdevin
Kingdevin
8 years ago

Love the 4130 32t narrow wide. I believe its there tallest profile out of any of the NW rings.

Durianrider
Durianrider
8 years ago

Will that 32 chainring fit on cranks other than Praxxis?

Im running power meter based cranks that is the reason I ask and Ive already got 10pairs of top level cranks so don’t need another pair just yet.

Veganpotter
Veganpotter
8 years ago

Still hoping these guys make elliptical rings in the future…

Flatbiller
Flatbiller
8 years ago

STS wrote: “If you tend to turn your heel inwards the Zayante is one of the worst designed cranks on the market.”

Huh?

Veganpotter
Veganpotter
8 years ago
Reply to  Flatbiller

When your foot is forward, your heels hit the crank. This is a problem for duck-footed people and they often need pedal spacers for clearance but some cranks are worse than others

typevertigo
typevertigo
8 years ago

That 32T ring has me genuinely interested. I wonder what big ring it’s supposed to work with, though?

Most of Shimano’s road double front derailleurs are meant to work with a chainring size difference of 16T, so a 50/32T combo is two teeth too large of a gap on paper.

I don’t mind having a 48/32T combo but other riders may not be so welcoming of a reduction in top-end gearing.

Peter
Peter
8 years ago

I heard zayante cranks won all kinds of stiffness tests. Hollow forged. Wish I had a pair!
@adam 😉

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.