Home > Bike Types > Cyclocross

NAHBS 2016 – TºRED shows unique titanium, steel & alloy bikes, plus slick one-piece double crankset

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

tred-Callithrix-fillet-brazed-steel-gran-turismo-road-bike02

TºRED is an Italian brand making bikes in Italy from steel, titanium and, with the launch of a Kickstarter campaign for their latest, now aluminum, too. The name is pronounced “tred / tread”.

Above, the Callithrix is their butted, fillet brazed Dedacciai steel frame that blends the classic material with modern features like thru axles, disc brakes and a full carbon tapered fork. It’s a beauty, as are their other road, cyclocross and race bikes…

tred-Callithrix-fillet-brazed-steel-gran-turismo-road-bike03

The brass fillets are brushed smooth and combine with the graphics to create a good overall look (IMO).

tred-Callithrix-fillet-brazed-steel-gran-turismo-road-bike04

tred-Callithrix-fillet-brazed-steel-gran-turismo-road-bike05

TºRED has mostly stuck with threaded bottom brackets across the range.

tred-Callithrix-fillet-brazed-steel-gran-turismo-road-bike01

Their flat mount disc brake design is one of the most minimalist we saw at the show, which is now a stock part in steel from Paragon (with ti versions coming soon, according to Mark at PMW). Those rotors are from Carbon-Ti, as are most of the skewers/axles shown on their bikes.

tred-Aracnide-titanium-disc-brake-road-bike01

The Arachnid VedovaNera Edition is a custom blended titanium road race frame that’s sand blasted and then partially painted in matte black.

tred-Aracnide-titanium-disc-brake-road-bike02

Up front is a tapered headtube for their custom carbon fork. They say their welds come away this smooth, that no sanding is done after the build.

tred-Aracnide-titanium-disc-brake-road-bike08

The carbon components (wheels, fork, etc.) come from their own line called Toot. The fork has a 15mm thru axle with large knurled nut rather than the threaded insert, which lets you put the lever on either side depending on your preference. The brake hose runs internally, and a version of it is used for their ‘cross bikes, too.

tred-Aracnide-titanium-disc-brake-road-bike04

Seat tube had to be custom worked to handle the different stresses put on it by moving the seat stays down, and then they used a softer, almost pure titanium for the stays to give it a bit more comfort. The rest of the bike uses totally custom tubes from Russia – 3/2.5 for the main triangle and 6/4 for the BB shell and head tube.

Asymmetric seat stays to clear the brake caliper.

tred-Aracnide-titanium-disc-brake-road-bike06

The frame uses a standard threaded BSA bottom bracket, which doesn’t leave much (any) room for passing a cable or hose by it. But, they wanted a completely enclosed brake hose line. The solution was this custom tube welded onto the BB shell, so there’s no compromise to the BB shell and the cable or hose is protected.

tred-Aracnide-titanium-disc-brake-road-bike10

Even they admit it’s a pain to route the rear brake hose, required a guide string or cable to be inserted first, but the result is rather clean compared to the hose exiting the downtube and then re-entering at the chainstay.

tred-Aracnide-titanium-disc-brake-road-bike11

They offer both flat mount and post mount brake attachments, with the latter getting replaceable threaded inserts.

tred-manaia-alloy-road-bike-kickstarter01

The Manaia is their new alloy road race bike that uses a 7000-series alloy blend of scandium-zirconium in the aluminum/magnesium tubes to create a stiff, light bike with construction made to take all the abuse you can throw at it.

tred-manaia-alloy-road-bike-kickstarter08

The model name comes from the Maori culture of New Zealand, with the logo on the top tube representing the head of a bird, body of dragon, and tail of a fish. The story goes that it represents sky, land and water, and is shaped like an infinity “8”.

tred-manaia-alloy-road-bike-kickstarter04

Compared to a normal design, the wrap-around seat tube design has 75% more welding surface area at the seatstay/seat tube junction, which they say makes the frame laterally stiffer.

tred-manaia-alloy-road-bike-kickstarter03

It uses a standard round seatpost but gets this faceplate style clamp.

tred-manaia-alloy-road-bike-kickstarter05

They made their own dropouts since no one had flat mount thru axle for alloy bikes (some of the other bikes, like a large portion of custom builders, use Paragon Machine Works dropouts).

tred-manaia-alloy-road-bike-kickstarter06

While the other bikes here are already available, the Manaia just went on Kickstarter. Frameset retail will be €2,990, includes fork, headset and seat post, but earlybird and other deals are available.

tred-V-Strong-One-machined-one-piece-chainrings-road-crankset06

On the Manaia are TºRED’s V-Strong One cranks (made by OMC-ITALIA), which use a modular design with a one-piece spider/chainring unit that machines both the large and small chainrings into a single piece.

tred-V-Strong-One-machined-one-piece-chainrings-road-crankset01

The original version of this crankset debuted in 2009, but it’s gotten a recent upgrade with the switch to a pentagonal BB spindle interface.

tred-V-Strong-One-machined-one-piece-chainrings-road-crankset03

The chainring/spider is machined from Ergal 7075 alloy that’s hard anodized with a higher thickness than is usually done for cosmetics. This, they say, gives it a longer wearing, more durable finish.

tred-V-Strong-One-machined-one-piece-chainrings-road-crankset02

tred-V-Strong-One-machined-one-piece-chainrings-road-crankset05

The ranks are machined then drilled the length to reduce weight. The complete crankset comes in at a claimed weight of just 540g. The modular design means you can quickly and easily swap between any of the chainring combos (50/34 – 52/36 – 53/39). Arms are available in 170, 172.5 and 175mm lengths, Q-factor is 145mm and chainline is 43.5mm.

tred-gravel-and-cyclocross-titanium-bikes01

Last up is their CamoBeast, which serves as both gravel and cyclocross bike and comes in titanium or steel. Both use a wishbone seatstay, and both use an open rear triangle so you can swap between chain and belt driven transmissions.

tred-gravel-and-cyclocross-titanium-bikes04

And, because they use interchangeable dropouts, you can switch them between singlespeed, Alfine internally geared ups or standard gears.

TredBikes.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Rohan
Rohan
8 years ago

That is some good looking stuff.

SNIPE-HUNTER
8 years ago

VERY NICE! Excellent work fellas

NUNO PIRES
NUNO PIRES
8 years ago

the Crank is OMC ITALIA

http://www.omc-italia.com/gb/

Veganpotter
Veganpotter
8 years ago

Loving these bikes, I rarely like painted titanium. That said, sand blasting is sanding. That’s half the reason why those welds are so smooth. It doesn’t take much to do that.

TheKaiser
TheKaiser
8 years ago

Those are some good looking bikes, although I personally would pass on that BB brake hose noodle…that thing could win an NAHBS award for most challenging cable/hose routing, as if it needs to be any more of a hassle than it is already. Any Ti gurus out there care to chime in on the effect of using CP titanium vs. 3/2.5 for the seat stays to improve ride quality? I’ve seen tons of shaping of the stronger material to improve compliance, but never seen a downspec in tube type for any reason other than cost.

finechinaster
8 years ago

kind of misleading…

Tom
Tom
8 years ago

not trying to be a hater, but $2990 Euro for an aluminum frameset? Seems a little rich. Though the graphics throughout the line are pretty sweet.

Tom
Tom
8 years ago

Kaiser, I may be mistaken, but various alloys of the same base element usually have very similar modulus of elasticity. hence, I would think cp titanium is nearly the same stiffness as 3.2.

Eric
8 years ago

Commercial Pure (CP) titanium is not alloyed with anything. It is not as strong and vastly inferior to the alloyed grades. As far as ride quality goes, the Modulus of elasticity of CP vs 3AL 2.5v is about 5% MORE. So the seat stays are actually more stiff than the other tubes.
But CP is only about 40% the yield strength of 3/2.5! Not sure what is going on here….

And…..doesnt titanium already have good “flexibility” and ride quality? (out of my price range so I wouldn’t know).
Nice looking steeds though.

comrad
8 years ago

Holy cow, good stuff but terrible naming. V strong one? toot? TOOT?

Allan
Allan
8 years ago

Great aesthetics! Love the brass fillets, that’s a very interesting look

Thomas
Thomas
8 years ago

My gosh… Hone that seat tube so the post doesn’t have nasty scratches!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.