Home > Bike Types > Cyclocross

NAHBS 2016 – Prototype X-Fusion McQueen 27.5+ fork debuts on Retrotec mountain bikes

3 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

retrotec-275-plus-trail-mountain-bike01

When we asked Retrotec builder Curtis Inglis what he was bringing to this year’s show in our Road to NAHBS interview, he said coffee mugs. And he hinted at some 40th anniversary goodies from Chris King and “special parts” on another bike. Well, from what we can tell, those Olive Crate hubs and headset made it onto this bike, which also had an as-yet-unseen Plus fork from X-Fusion…

2017-X-Fusion-McQueen-275-plus-suspension-fork-prototype01

We haven’t heard back from anyone at X-Fusion yet, but some of the details are apparent. Based on the tires and it’s stance, it’s a 27.5+ fork, which means it probably doubles as a 29er Boost fork with reasonably sized tires.

2017-X-Fusion-McQueen-275-plus-suspension-fork-prototype04

The crown is smooth, but we could see the steerer pressed into it, so it’s likely not their more expensive hollow formed, one-piece Uni-Crown steerer/crown part. They look small in comparison to the tires, but it seems likely they’d stick with their 34mm stanchions since the bigger tread has so much more grip.

2017-X-Fusion-McQueen-275-plus-suspension-fork-prototype05

The dual knobs up top mean high and low speed compression adjustments…

2017-X-Fusion-McQueen-275-plus-suspension-fork-prototype06

…and a single rebound knob underneath controls low speed rebound. Our guess it the internals are their new HLR Roughcut sealed system they introduced this time last year. We’re hoping to get the scoop on this fork at Taipei show this week.

retrotec-275-plus-trail-mountain-bike02

Tire clearance on both ends of the bike is good with WTB’s 27.5 x 3.0 Bridger. So, you now have the option of getting Retrotec’s beach cruiser aesthetic with the latest axle standard.

retrotec-275-plus-boost-mountain-bikes01

retrotec-275-plus-boost-mountain-bikes03

He had a few examples, showing off Boost spacing with both Fox and Rockshox forks, too.

retrotec-bent-twin-top-tube-road-bike01

The twin top tube design works for road/cross/gravel bikes, too. That’s the builder back there toasting his beer with a handlebar mustache and plaid pants. Gotta love Curtis!

retrotec-bent-twin-top-tube-road-bike03

It’s not flat mount, but his custom brake tabs are minimal and good looking.

Inglis-gravel-road-travel-bike-with-ss-couplers01

If you prefer the traditional double triangle design with straighter lines, he also builds under the Inglis name. This S&S coupled travel gravel bike was a fine example, putting thru axles front and rear.

Inglis-gravel-road-travel-bike-with-ss-couplers02

retrotec-coffee-mugs01

And true to his word…

InglisCycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

3 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
PsiSquared
PsiSquared
8 years ago

Retroctec’s bikes, especially the road bikes, are some hot looking machines.

Haromania
Haromania
8 years ago

Bad. Ass.

Mike D
Mike D
8 years ago

J*** at X Fusion… did, did you get busy with the art department last fall?? Because I must say, that fork is half-way decent looking. I might even say it’s on the verge of being attractive! Kudos to you, and here’s hoping for better looking forks all the way around this year 🙂

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.