Home > Clothing-Gear-Tools

Brim Brothers wearable power meter makes going from bike to bike just a click away

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

brim-brothers-Zone-DPMX-wearable-cycling-shoe-power-meter-01

Power meters come in all shapes and sizes nowadays, but they’re all attached to the bike. That makes transferring it from bike to bike a pain in the tookus. They crept their way from the rear hub, to the crankarms, and on to the pedals, but Brim Brother’s Zone DPMX power meter leapt right off of the pedal and onto the shoe!

Check out details and rather comfortable price points after the break…

Zone Power meter 1 Zone Power meter 2

We first saw Brim Brother’s Zone DPMX wearable power meter at Interbike a couple of years ago. Currently it is only compatible with Speedplay Zero pedals and comes as either a single ($440), or dual-sided system($881). The only real requirement past that is that you need to have a strap on the shoe to mount the pod to.

It’s been in development for six long years but now, finally, Brim Brother’s have launched a Kickstarter hoping to have product available as soon as May 2016.

Zone Power meter 3

The obvious benefit to the design is that it’ll go from bike to bike without having to move any hardware…assuming you’ve got Speedplay Zeros on all your bikes. That basically rules out mountain and cyclocross bikes for now, but we’re just happy the system is finally coming to market. Gotta start somewhere.

Zone Power meter 4 Brin Zone Power meter

The Zone DPMX uses a thin piezo ceramic sensor plate that replaces the stock Speedplay cleat thus not increasing the stack height. The plate sends a signal to the pod on top of the shoe and measures the pressure applied 100 times a second. The pod also houses a motion sensor that measures cadence as well as sensing exactly what angles the pedals and cranks are and how much they are rocking back and forth. The data is transferred via ANT+ making it compatible with computers and smartphones with ANT+ receivers.  The dual system sends data just like that of the Garmin Vector 2’s so you can see a side by side comparison of your power output on compatible devices. The single sided option just doubles the number to give you estimated total power, much like Stages.

Zone Power meter 5

Installation and setup is pretty straight forward. Assuming nothing’s changed since they showed us at Interbike, it installs just like a regular Speedplay cleat with the exception of putting a sticker on the bottom of your shoe to protect it from the Sugru (this stuff is worth looking up) you apply between the shoe and the cleat. Once you tighten things down, the Sugru sets to form a solid, even contact with the curvature of the shoe to prevent the plate from flexing. Hope you plan on keeping your shoes for a while.

Zone Power meter 6

We weighed the unit at Interbike and though it came in at 50 grams, since it’s replacing the 15g Speedplay plate, it should add only about 35 g per side.

Brim Zone Package

The power meters runs for up to 15 hours per charge and easily detach from their mounts to recharge on the provided USB cradle.

Zone Powermeter deets

Check out their already fully funded Kickstarter Page here and snag your own pair before anyone else.

BrimBrothers.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
fiddlestixbob
8 years ago

seems a little bulky but i like the concept
Would be nice if it integrated in the sole of the shoe instead 😉

someslowguy
someslowguy
8 years ago

“All Powermeters are on the bike.” This source seems to show otherwise: https://bikerumor.com/2014/10/19/ib14-rpm2-power-meter-shoe-insole-inserts-measure-force-everywhere/

Heffe
Heffe
8 years ago

It needs to work with more pedals.

Mike
Mike
8 years ago

I’m not about to buy a different pedal system just to use this.

anonymous
anonymous
8 years ago

Does it show my power doing squats?

Veganpotter
Veganpotter
8 years ago

I’m curious about how this reacts to the different curves of different shoes. Sure, it can be zeroed but if it’s pre-flexed more than normal when not under load, it may not have the right slope once torque is applied

Mario
Mario
8 years ago

Next step: partner with a shoe company and intergrate everything together.

dr_lha
dr_lha
8 years ago

“I’m not about to buy a different pedal system just to use this.”

Yes, a lot of speedplay lovers say this about Garmin Vector or Powertap P1. I see a market for this, people love their Speedplays.

John
John
8 years ago

The strap with the pod mounted on top of the shoes seems weird.

Peter Herman
8 years ago

@veganpotter: I can’t see whether they do something similar or not, but the Speedplay shims that are provided with a cleat set do a remarkable job of addressing this issue (shoe sole curvature). If this plate uses those shims, I wouldn’t anticipate a big problem.

Rako
Rako
8 years ago

It’s spelled tuchus

Allan
Allan
8 years ago

Now, I’m no scientician, but how accurate can this be compared to on-bike meters? Seems like the movement and pressure in the foot would be less predictable and uniform compared to strain gauges on a crank arm, or other on-bike meters.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.