Home > Bike Types > Cyclocross

Pioneer power meters pricing gets even more competitive, OTA updates & more coming soon!

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Pioneer Powermeters price drop for dual and single leg versions plus new upgrade option

When it launched less than two years ago, Pioneer offered the first dual leg product to be offered globally, and the first to offer high definition pedaling metrics. They still offer the most detailed pedal stroke analysis, but several other brands have begun offering dual leg measurement.

But, for the product, Pioneer had very competitive pricing. Which, directly or not, resulted in many other major brands (Quarq, PowerTap, Power2Max, SRM, etc.) dropping their prices. So, at Interbike last fall, Pioneer introduced a single sided (single leg) version to offer their system at an even lower price, but one that could easily be upgraded to dual leg as need or budget allows. And that gave them an option to compete with Stages, and beat them on price by a bit, too.

Now, in the best possible race to the bottom, Pioneer’s pricing drops another 30% ($270 off!) for single leg, putting them at just $529 (€629) for Ultegra 6800 and $649 (€699) for Dura-Ace 9000, both including the non-drive crank arm. But that ain’t all…

pioneer cycling power meter now available for installation on your own crankset

Their dual leg system also drops, coming in at $1,300 (Ultegra, down from $1,550) and $1,500 (Dura-Ace, down from $1,850), which includes the entire crankset.

Even better, for just $579, you can send in your existing 11-speed Dura-Ace or Ultegra crankset and they’ll add single-leg power to the DRIVE side. Why the drive side? Because, since they redesigned it to have a slimmer mounting profile, the driveside hardware fits on more bikes with zero clearance issues. The non-drive transmitter/strain gauge unit sticks off the crank farther and doesn’t work with all chainstay designs. All price changes take effect February 1.

Another bonus of their system? You could take a dual-leg system and move one of the arms to a similarly spec’d bike and get single leg power on two bikes.

pioneer power meter cycling computer now compatible with Shimano D-Fly Di2 wireless information

In order to see the hi-def data, the system has to transmit in Pioneer Mode, which is a modified, private ANT+ protocol. But, it could also transmit in standard ANT+ channels for sending basic data to any ANT+ cycling computer. In December, they updated the software to dual broadcast Pioneer Mode and ANT+ so that it can simultaneously send cadence and power data to something like Zwift, TrainerRoad, a Garmin, etc., while the Pioneer head unit shows the hi-def pedal stroke detail. And this one’s an OTA (Over The Air) update for the computer, not the power meters.

For the actual power meter updates, they’ll soon have web-based, OTA firmware updates that’ll keep the hardware on your bike. Currently, Pioneer would prefer that you send in the unit, but you can also connect them to your computer and spend about two hours doing it. They say the upcoming OTA updates will only take about 10 minutes, though.

Also coming at some point are SRAM compatible versions, but there’s no announced dates. All they’ll say is it’s on their roadmap. And *ahem* should Shimano’s Dura-Ace product cycle push out the predicted new group sometime this year, chances are good Pioneer will be ready. They do, after all, sponsor several Shimano-equipped teams.

PowerIsKing.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Roddy
Roddy
8 years ago

I’m gonna buy a powermeter when prices drop to 250 bucks.

boom
boom
8 years ago
Reply to  Roddy

I think you mean that when prices drop to $250 AND accuracy stays the same. I’m actually getting rid of my Stages because it’s just not accurate enough. Do you want to be able to check the box or to actually use it as an accurate and valid training tool? Big difference.

Allan
Allan
8 years ago
Reply to  Roddy

It’s almost there…I got my PM for $315 after discounts and special offers.

@boom, are you talking about accuracy or repeatability? If you do mean accuracy, how are you measuring that? Do you have a second PM on your bike? While important, accuracy is not as important as repeatability.

spytexisawesome
8 years ago
Reply to  Roddy

I’m gonna buy a powermeter when prices drop to 249 bucks.

Randall
Randall
8 years ago

@Roddy – As long as you know that you’re foregoing a ridiculously useful metric in the interim.

powerwatts
powerwatts
8 years ago

When was Pioneer ever cheaper than Stages?
They launched at IB15 with prices equal to existing Stages prices and Stages lowered their prices at the same event. They’re just dropping them to be the same price as Stages, 5 months later.

dr_lha
dr_lha
8 years ago
Reply to  powerwatts

$529 for 6800 is cheaper than Stages, which charge $579. For $529 Stages will sell you a 105 crank-arm.

dr_lha
dr_lha
8 years ago
Reply to  dr_lha

Although I believe that the price for the Pioneer is actually $559.99, still cheaper than the 6800 Stages arm though.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.