Home > Feature Stories

Review: Novatec Sprint Tubeless Road Wheels

23 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

IMG_9458

I’m sure you’ve heard it many times before, so I’ll apologize, because you’re going to hear it again. Without doubt, wheels are one of the best areas on your bike to upgrade. Any experienced cyclist will tell you that if you’ve got dollars burning a hole in your pocket, there is no better component on your bike to throw money at than a new set of hoops.

Providing you get the right option, a lighter, stiffer, or more aerodynamic wheelset can transform the overall ride quality of your bike. When you ride, your wheels are constantly rotating. Compared to a static item on your bike such as a handlebar or brake calliper, a wheelset comprises a rotating mass that needs to be accelerated and decelerated thousands of times on every ride. Therefore, even a relatively small drop in weight from your tyre or rim can result in a noticeable change to your bike’s ability to pickup speed.

Of course aerodynamics and stiffness are important too, because wheels are the direct link between your pedals, handlebar and the road. Even the most high-end race bikes on the market will ride like a bag of bones if they’re fitted with a heavy and floppy wheelset. The good news though? Upgrading the wheelset on an entry-level road bike can inject a serious dose of performance that you’ll immediately feel out on the road.

Do the Novatec Sprint wheels tick the upgrade box? Read on for our review!

IMG_9446
All photos captured by Scott Vaughan

Looking to tap into the wheelset upgrade market, Taiwanese brand Novatec offer a complete line of road and mountain bike wheels that are designed to deliver high performance, without a high sticker price. As the performance arm of Joytech, the Novatec name is typically best known for its enormous range of bicycle hubs, and they also manufacture hubs under license for many other big-name wheel brands. In the last 6-7 years however, they’ve been making a concerted push with their complete wheelset lineup too.

The Sprint wheelset is Novatec’s lightest alloy road wheelset. At a claimed weight of just 1355 grams, they’re targeted towards criterium racers and hill climbers. With stainless steel spokes, sealed cartridge bearings, alloy rims and a machined braking surface, Novatec claim that the Sprint wheels provide “race readiness and workhorse reliability”.

With an MSRP of $769 USD and $799 AUD, the Novatec Sprint wheels are certainly appealing on paper. But what are they like to ride in the real world?

IMG_9464

Initial Impressions

Out of the box, the Sprints certainly look lightweight. The diminutive front hub, skinny stainless steel spokes and shallow rims leave a lot of negative space within the tyre line, which I’ll admit is a nice change from the deep-section carbon rims I’ve been testing lately. I think it’s the more ‘classic’ look that I dig.

The Sprints feature rims built from Novatec’s proprietary alloy blend, which we’re told is similar to a 6069 alloy. They have a sleeved joint and a machined braking surface that works with regular brake pads. At 23.4mm tall, the tubeless compatible rims don’t have a particularly deep profile, but the emphasis here is on a light system weight versus outright aerodynamics. Novatec have other wheels for that.

IMG_9441

The wheels themselves are handbuilt in Novatec’s Taiwan facility, with only the initial tensioning process being carried out by a machine. Everything else is done by hand.

Pillar stainless steel double-butted spokes are used all round, with 20 spokes laced radially on the front, and 24 used on the rear with 1x lacing for the non-drive side, and a 2x lacing pattern for the drive side. Novatec spec 14mm alloy nipples on the Sprint wheelset, with two red nipples tying down the silver spokes that straddle the valve hole on each wheel.

At the centre of the wheels you’ll find Novatec’s high-end road hubset. These feature lightweight alloy hub shells, 7075-T6 axles, Japanese sealed cartridge bearings and a 3-pawl freehub mechanism. With just 2 x 5mm hex keys, the hubs can be pulled apart for freehub maintenance and to check bearing condition. For longterm serviceability, every component inside the hub is replaceable.

IMG_9450 IMG_9452

Aesthetically, the Sprint wheels look slick with their black micro peened surface finish. However, comments were split on the red anodized highlights on the hub end caps. I quite like them, but there will be bikes out there that won’t suit the colour scheme. Minimalist quick release skewers are included in the box, but annoyingly, the logos are upside-down if you want to run your skewers facing backwards.

Our test wheelset came out to 1396 grams on the scales, which included the supplied tubeless tape and valves. The tape was pre-installed, but depending on the Novatec distributor in your country, the Sprint wheels may or may not come with the tubeless kit. In the case that they don’t, you can easily sub in Stan’s Yellow tubeless tape and universal valves.

DSC02103

The wheels were setup predominantly with a pair of Schwalbe One Tubeless tyres, and I experienced nothing but faultless performance. The tyres did require a blast from a compressor to get them to seat initially, but once the bead ‘snapped’ into place, the tyres stayed put for the entire test period. We also tested the wheels with a pair of 28c Bontrager AW3 tyres, and a pair of 25c Continental GP 4000 tyres. Both of these were standard clincher-types with inner tubes.

If you’re looking for further details and the full spec rundown on the Novatec Sprint wheels, be sure to check out our comprehensive First Look article.

Setup

Over the past 6 months, the Novatec Sprint wheels have been ridden under various testers on a variety of different bikes. From daily service on a commuter bike through the winter rain, to high-intensity criterium racing, through to dancing around all-day long in the mountains, the Sprint wheels have seen a lot of miles. And while I didn’t tell Novatec, I did pass the wheels onto a test rider who came in well over the 80kg weight limit. I wanted to see how the lightweight wheels would fare outside of their design intentions, and to uncover any potential flex or durability issues. But more on that later…

IMG_9437

For their first hit-out, the Sprint test wheels were bolted onto my personal Trek Emonda ALR 5. After the successful launch of the carbon version in 2014, the alloy Emonda was released earlier this year, and it’s built around a 1050-gram alloy frame and a 360-gram full carbon fork. The Emonda ALR 5 retails for $2199 in Australia ($1679 in the US), putting it smack-bang in the middle of the range with a full Shimano 105 groupset. As a complete bike, it’s terrific value, but it’s also a great example of a bike that can benefit from a potential wheel upgrade. It’s really the only area on the Emonda ALR 5 that I feel is lacking behind the rest of the build kit.

DSC02112 DSC02114

While I was expecting a decent weight drop, fitting the Sprint wheelset lobbed off over 600 grams from the stock Bontrager alloy road wheels – a staggering 30% weight reduction! With the lighter wheels installed, the bike was immediately transformed into a lighter, sharper and faster machine.

From the very first pedal stroke, it was clear that this wasn’t just a lightweight set of wheels, but a smooth-riding one too. This was particularly noticeable with the 25c tubeless Schwalbe tyres installed, which I was able to run at 75psi for beautifully supple feel on the road. Of course tyre pressure is entirely dependent on conditions and rider weight, but I have found I can drop 10-15psi comfortably with the tubeless setup. Many of the sealed backcountry roads surrounding my hometown of Bendigo are made up of coarse bitumen, so being able to smooth out the ride is highly important for reducing body fatigue on longer rides.

Having run tubeless on my last two road bikes, I can happily recommend it. Providing you have a nice and tight fit between a tubeless-ready tyre and a matching tubeless-ready rim, the system delivers airtight security and the ability to run lower pressures for a smoother ride and more cornering grip. With 50ml of liquid sealant inside the tyres, small pinhole punctures can be sealed up while you’re riding. Bigger cuts will still require a new inner tube and a tyre boot to get you home, and it’s in this scenario where road tubeless gets messy and frustrating. The initially tight fit makes them a pain in the arse to remove and install, and in the case of the Novatec wheels, you’ll need to be careful not to damage the rim tape with tyre levers. Once you’ve had them on the wheels for a while though, they do stretch, and it makes removal a little easier. That all said and done, in over 6 months of testing, I am yet to have any issues at all. That’s compared with my regular tube-type road wheelset, which probably suffers a puncture about once a month on average.

(Note: If you’re looking to learn more about road tubeless, make sure you check out Part One & Part Two of our online articles on the topic.)

On the road

IMG_9343

Acceleration from the Sprint wheels is swift, and minimal effort is required to get them up to speed. Under hard accelerating efforts, they are impressively responsive. Maybe not quite as responsive as some of the stiffer wheels out there, but they’re still damn good. The light overall weight definitely helps during the rapid speed changes you might encounter on a tight criterium course or while battling toe-to-toe on a hill climb.

Handling is also excellent, and after removing the heavy stock wheels, I found the steering to be much more direct overall. Carving corners becomes just that little bit easier, with less chance of understeering and taking corners too wide. Braking is strong and predictable with the machined alloy surface, which gave me more confidence when dumping the bike deep into downhill turns.

On the climbs, the Sprints proved to be a lively set of wheels, and they seem to enjoy being thrown about when you’re reefing the bars side-to-side. Their light overall weight helps to inject a good deal of zip into the bike, and they egg you on to click down a couple of gears and launch out of the saddle. Every time a fellow rider pushed past me, I just couldn’t help myself.

IMG_9403

With their quality build and well-balanced spoke tensions, the Sprint wheels are plenty stiff laterally, which contributes to their whippy feel on the climbs. And despite our best efforts to mash them during flat-out sprint sessions, none of our testers could achieve any discernible brake rub from the lightweight alloy rims. Our larger test rider did detect a small amount of flex through the front hub when pushing hard, though to be honest, it never presented an actual problem in the real world.

Certainly compared with some deep-section rims out there, the Sprints aren’t quite as rigid. The flipside of this however, is that there is a little more damping to the ride quality. It’s part of the reason why they feel smooth out on the road, and not bone-jarringly stiff like some of their competitors. Of course there is such a thing as having a wheel that’s too stiff, and a little bit of compliance can go a long way. For their intended purpose, Novatec seem to have gotten the balance right with the Sprints.

DSC02906 DSC02905

As you would expect from a hub specialist, the bearings continue to spin beautifully smooth after 6 months of all-weather punishment. Exacting tolerances and good sealing helps here. When the bearings do eventually show signs of wear, they’re relatively cheap and easy to replace.

There are 27 engagement points inside the freehub, which clicks along at a medium frequency and volume. As a comparison, it sounds very similar to a Zipp freehub. Higher engagement is typically more important for mountain bike wheels, but criterium racers and cyclocrossers may wish for faster pickup. With exactly that in mind, Novatec is currently working on a 6-pawl freehub mechanism that will double the engagement points, with only a slight increase in coasting drag.

DSC02908 DSC02118

Durability

I’m afraid I’m going to have to be boring here, because during our time with the Sprint wheels, we experienced zero durability issues. There have been no broken spokes, no buckles to the rim, and not a skerrick of popping or creaking from the freehub. Just yesterday I pulled the hubs apart to check out the internals, but it appeared unnecessary, as everything was as clean and slick as it was when I first received the wheels.

DSC02911 DSC02913

After removing the cassette, I did notice a very slight amount of digging into the alloy splines on the freehub body, but far less than what some other wheels would show after the same amount of kms. In fact, the cassette slid off cleanly, without the need to pry it off with a screwdriver. This is thanks to the stainless steel Anti Bite Guard (A.B.G), which offers better support to individual cassette sprockets. The design is similar to what’s found on American Classic wheels, and it’s reassuring insurance against potential damage to the freehub body.

One point to note is that with the round straight-pull spokes, they are a little trickier to true than a regular J-Bend or bladed spoke. Ideally, you’ll need to use a special tool to hold onto the spoke while turning the nipples, so that the spoke doesn’t also turn on its own. That said, there seems to be enough friction between the spoke head and the corresponding pocket on the Sprint’s hubs that we didn’t need a special tool.

IMG_9375

The Competition

As it stands, there are a lot of different wheel options on the market. Just as with bikes, wheels are becoming even more use-specific, so it’s important to take into account your own personal requirements when looking for a new set of hoops. Are you racing? How long do your rides typically last? Is your riding split 50/50 between the hills and the flats? Could you benefit from a tubeless setup? Is aerodynamics your primary concern?

While I’d love to compare the Sprint wheels to everything else on the market, there are 3 options from well-known companies that are worth pointing out. These wheels are also designed to offer tubeless performance, a low overall weight, and day-in-day-out reliability:

  • American Classic Sprint 350: Using a very similar name, these lightweight alloy hoops are also similar on specs and price. They do have a higher spoke count though (28/32), and they use standard J-Bend spokes. They’re also a shade wider, with a 19.7mm internal rim width, and they have a higher 100kg rider weight limit. Retail pricing is $899 USD and $869 AUD.
  • Shimano Dura-Ace 9000 C24: A well-known and much-loved wheelset from the Japanese giant. These use a carbon/alloy hybrid rim construction that offers a little more strength and stiffness, with a higher rider weight limit of 110kg. The tubeless version uses a solid outer rim bed, so no tape is required for tubeless setup. However, it does mean the C24’s use a proprietary spoke and nipple system. Claimed weight is 1469 grams and they retail for $1199 USD and $1895 AUD.
  • HED Ardennes SL PLUS: With a modern rim design that measures 20.7mm wide internally, the Ardennes PLUS are also tubeless compatible. They use a high-end build with Sapim CX-Ray spokes and HED’s own hubs, but they do come in heavier, at a claimed weight of 1502 grams. The sticker price is also higher at $1200 USD and $1885 AUD.
Impluse_large
The Novatec Impulse wheelset uses the same hubs and spokes as the Sprint model, but features 32mm deep rims that offer improved aerodynamics, better stiffness and a higher weight limit.

It’s also worth drawing attention to some of the other models within Novatec’s own wheel line. The Impulse wheelset shares the same hubs and spokes as the Sprint wheelset, but swaps in a 32mm deep alloy rim that offers greater stiffness and aerodynamics. The Impulse wheelset retails for the same price, it’s also tubeless compatible, and it doesn’t have a recommended weight limit. For the extra strength and aerodynamics, you’ll add 140 grams over the Sprint wheelset.

You can go even lighter with Novatec’s “R” series carbon wheels. The R1 is the carbon-equivalent of the Sprint wheelset, with the same hubs and spokes being laced into a 24mm deep carbon fibre rim. Weight drops down to a very light 1245 grams, while the price bumps up to $1899 USD. While the R1 wheelset is available in a tubular version (as are many of Novatec’s road wheels), the clincher is not tubeless compatible.

IMG_9331

The Verdict

After spending a solid 6 months aboard the Novatec Sprint wheels, all of our testers came away thoroughly satisfied with their on-road performance. As it stands, the Sprint wheelset is impressively light, and impressively smooth for the dollars. They’re well built, they’re simple to setup tubeless, and in our collective experience, they have proved to be sufficiently durable enough for me to recommend them as a great everyday lightweight wheelset.

If you’ve got the coin to splash, you can certainly get lighter, and you can get wider too. You can also get deeper, but if you’re chasing aerodynamics, then these wheels won’t be for you. It should already be obvious, but if you’re over the 80kg weight limit, then these wheels also aren’t for you. My personal recommendation would be to check out the Novatec Impulse wheelset if you fit in the above category.

IMG_9325

Novatec’s stated goal is “to provide high quality, high performance, and high value cycling components”. In that regard, the Sprint wheelset certainly deliver on their claims. They’re a great quality and lightweight option for those that don’t want to spend the earth on new wheels. And if you’ve got an entry/mid-level road bike, consider these guys when you’re putting together your list for potential upgrades.

Do you have any other wheel recommendations to add? Why don’t you leave them in the comments section below? Otherwise, hit up the below links for more information on the Novatec range;

USA: www.novatecusa.net
Australia: www.bicyclepartswholesale.com.au

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

23 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
WV Cycling
WV Cycling
8 years ago

1355g is lightweight? Eh, I guess so. Have been riding on a pair of Flit Letica’s since 2010 that came out nearly 100g lighter.

Ah, yes. The bicycle wheel weight term spectrum.

Cheap Wheels > Clydesdale Wheels > Regular Wheels > Light Wheels > Lightweight Wheels > Weight-weenie Wheels.

Veganpotter
Veganpotter
8 years ago

WV, are your 1250 gram wheels aluminum, tubeless and this affordable?

WV Cycling
WV Cycling
8 years ago

Negative! They were pretty affordable though. 😀

Veganpotter
Veganpotter
8 years ago

WV…they’re probably narrow rims too. There’s a huge difference between a light, narrow rim and a robust, tubeless road rim that’s also wide and also pretty darn inexpensive for what you’re getting.

I run HED or Pacenti rims on everything. I’ll never voluntarily ride a rim narrower than a 23 ever again and will never buy anything that’s not wider. With White Ind. Hubs and DT 240s…my wide wheels are pretty light but not this light with 28 spokes. I’d like to give these a shot

uk100
uk100
8 years ago

I can’t seem to find rim width in the review?

bbb
bbb
8 years ago

“…Therefore, even a relatively small drop in weight from your tyre or rim can result in a noticeable change to your bike’s speed…”

No it can’t if you take the weight of the rider and the bike into account. The differences are almost irrelevant (comparing to non-rotating weigh) and no one ever managed to prove otherwise, even marketing department s of the biggest tyre/wheel manufacturers.

Larry Falk
Larry Falk
8 years ago

Rim dimensions: 23.3mm (depth), 21.3mm (external width), 17mm (internal width)

Velo
Velo
8 years ago

“Therefore, even a relatively small drop in weight from your tyre or rim can result in a noticeable change to your bike’s speed.”

Baloney! How are we to trust any of the review if the reviewer makes such ignorant statements?

Velo
Velo
8 years ago

Depth Inside Outside Weight
Pacenti SL 23 26.0 / 20.3 / 24.5 / 430 g
Novatec Impulse 32 / 17.0 / 21.5 /
DT Swiss RR 511 32 / 18 / 21.5 /
Boyd Altamont 30.00 / 19.86 / 24.00 / 530 g

Velo
Velo
8 years ago

ooops… The DT Swiss RR 511 weights 530 g, not the Boyd Altamont.

DJ
DJ
8 years ago

Hate Hutchinson Intensive Tubeless Road Tires, 2 new tires somehow got cracks (in sidewalls next to bead) almost 360 degrees around just sitting in storage, then when installed they get cut far too easy.
Never again will I buy Hutchinson.

Peter
Peter
8 years ago

DJ, reach of the them and get them replaced at no cost. I had issue with tire, submitted claim and received brand tire in two days.

Reek Hovac
Reek Hovac
8 years ago

Does anyone have a recommendation for 27 inch replacement wheels similar to the above mentioned brands? Yes, 27 inch. To be installed on a 32 year old Trek 620. Yes, I know, I’m too old to even be considered old school. My riding includes lots of hills and flats. No real touring. Total weight of rider and bike is about 200 lbs.

WV Cycling
WV Cycling
8 years ago

Reek – Not many left. Maybe the Alex X404 rims?

Zeke
Zeke
8 years ago

Reek – Can recommend Sun Ringle CR-18 rims. Narrowish touring/wide road rim. Been around forever, tough, middleweight, box-section, decent finish, come in silver/black and like, every wheel size ever, including 27″

SteelIsRealHeavy
SteelIsRealHeavy
8 years ago

@Reek Hovac
The difference in radius between 700c and 27″ wheels is only 4mm. With cantilever brakes on Trek, there is most likely enough adjustment range to equip the bike with 700c wheels. Just borrow a wheel from one of your riding buddies to check.

Ajax
Ajax
8 years ago

I’ll never go back to tubeless. Ever. Ever. Ever again. Give me the ease of repaiability of clinchers. Mid even take a tubular. Never tubeless though.

Corey
Corey
8 years ago

Velo – I can confirm the new Boyd Altamont Lite is 25 / 19.8 / 24.0 / 445g. Having built a few, they are stellar. A very similar rim to the SL23 V2, with a touch more brake track breadth.

Regular Altamont is 480-490g

mortimer
mortimer
8 years ago

Ajax – surely you’re doing something wrong. I’ve been tubeless on the road from the beginning. Not one puncture. A bit harder to set up, but my commute to work goes through a few areas strewn with glass (intersection accidents and or broken bottles). 2-3 Punctures every week a few years ago. Now the only time the tires come off is to replace worn ones. Sure tubes are easy to slip in – again and again and again – kinda brakes the rhythm of a ride. The day I get a puncture I guess I’ll have to put a tube in (hint keep your sealant fresh) Lower pressure also seems to give a good ride. Am using Ultegra and A Classic tubeless wheelsets. If I went back to racing then I’d probably slip on tubulars anyway.

rupert3k
8 years ago

Schwalbe Tubeless One 235g tubeless tyres (11600808) are the best road tyres on earth.
Naysayers are clueless!
(GP4000 is for peasant bums!)

Mark
8 years ago

“Wheelset comprises a rotating mass that needs to be accelerated and decelerated thousands of times on every ride.” Yes. And the decelerating part is called a “flywheel”, which cancels out the wheel’s rotating inertia. The only benefit of lighter wheels is when you are accelerating. Even then, a 600g drop in weight will make less than 1% difference. Otherwise, weight is weight, no matter where it is.

JM
JM
8 years ago

yeahhhh… $769 USD isn’t exactly what I would call appealing

CESAR R Moreira
4 years ago

I still doubt if they spin faster than my old Fulcrum R3 C15, although they are much lighter. I think the Fulcrum cup and cone system should be more efficient than the Novatec sealed bearing system for turning. Novatec Sprint has straight spokes and the Novatec Jetfly have J-Bend spokes, which makes the Sprint look more beautiful, sophisticated and racing.
A comparison of weights (on my digital scale), in grams:
Novatec Sprint: 602F / 784R;
Novatec Jetfly: 627F / 835R; and
– Fulcrum R3 C15 Two-Way Fit: 636F / 888R

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.