Home > Bike Types > Mountain Bike

TPE15: Blktec adds one-piece carbon clincher wheels & aero road bar-stem, new MTB bar-stem combo

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

blktec-one-piece-aero-road-handlebar-stem01

Blktec debuted at Eurobike last year with some unique bolt-on handlebar/stem units, and they’re back with more of those this year. But, for this new aero road bar, they eschewed the bolts and adjustability altogether to save weight and improve aerodynamics.

This one’s still a prototype, final weights are TBD. By using a one-piece design, there’s no need to round off the center section, letting them cut drag by keeping the airfoil shape all the way across. And it’s made for Di2, with a clever port underneath for the junction box…

blktec-one-piece-aero-road-handlebar-stem02

The wires run inside the bar and a Di2 or EPS junction box would hide inside the stem, accessible through that cover plate.

blktec-x3-mountain-bike-stem-combo01

The X3 mountain bike handlebar uses the same bolt-on design as the road bars they launched with.

blktec-x3-mountain-bike-stem-combo02

It’s a full carbon monocoque construction that weighs in at a claimed 300g for both pieces. You’ll still have 5º of angle adjustment.

blktec-one-piece-carbon-fiber-wheels01

Their C1 line of full carbon, one-piece wheels gains a clincher version.

blktec-C1c-carbon-clincher-one-piece-carbon-fiber-wheel01

It’s a 45mm deep, 25mm wide aero rim that’s molded to the spokes, which are molded to the hub. Weight for the wheelset is a claimed 1350g.

blktec-new-spoke-graphics02

Fresh graphics decorate the inside of the spokes and match the rest of the components.

Blktec-cycles.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
cajer
cajer
9 years ago

Is there a way to mount a garmin to this?

onion
onion
9 years ago

What kind of ghost magic is used to clamp those bars onto the steerer?

anonymous
anonymous
9 years ago

You cut the steerer at a angle and tighten the top cap, so it expands like a quill stem, except in this case it’s a quill steerer.

rupert3k
rupert3k
9 years ago

Cool, but where’s the 35mm MTB stem?
That thing’s too long.

EagerBeaver
EagerBeaver
9 years ago

just cause you can, doesn’t mean you should.

keville
keville
9 years ago

Is 1350g really light enough to get even pro teams interested in wheels where the spokes are *molded* to the rim *and* hub?

Graeme Smith
Graeme Smith
9 years ago

Bet I can break one on the first ride

anonymous
anonymous
9 years ago

Most people try not to crash on their first ride with expensive carbon.

Anon
Anon
9 years ago

How does one true that wheel?

Rico
Rico
9 years ago

I think the wheels look cool. looking forward to see how they perform in tests. Have they been in any yet?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.