Home > Bike Types > Commuter

EB14: Roundup – Clever Caliper-Mounted Brake Lights, Blinky Lights, Dynamos & Other Power Sources

10 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

IDX-brake-caliper-brake-light-for-bicycles01

There were no shortage of blinking, flashing, strobing and generally similar lights around the show floor, but a few stood out. Above, iDX had these brake lights that attache between the arms on a standard road brake caliper. The one above had a constant on or blinking setting, but the ones below used the caliper’s motion to activate the light, creating a real time brake light without the fuss and expense of accelerometers or needing any wires…

IDX-brake-caliper-brake-light-for-bicycles02

Click to enlarge this one and you’ll see that as the metal spring plate is squished between the caliper’s arms, it connects the current to light up the LED. I can’t find a website for these folks, so if you know it, leave it in the comments.

innovity-seatpost-clamp-lights-and-brake-pads01

Innovity had these cool little LED lights attached to seatpost binders. Just push them and the light cycles through on, flash and off. Run times are 20 to 40 hours with an LR1130 button battery.

innovity-seatpost-clamp-lights-and-brake-pads03

The clamps come in two sizes (31.8 and 34.9) and are made of AL7075 T6. The light unit is removable, and you’ve got the option of one or two bulbs and bolt-on or quick release clamp. Black, red or gold.

innovity-seatpost-clamp-lights-and-brake-pads04

They also do mini tools that truly are miniature. This ones the smallest I’ve seen.

innovity-seatpost-clamp-lights-and-brake-pads05

And finned brake pads. We’ve seen some interesting concepts from Stop Components/Kool Stop (which were also shown prior to that by Alligator), Scrub Components and even finned rotors from Jagwire. And of course you have Shimano’s IceTech pads. These take a little different tack by perforating the fins for added air flow through them.

edelux-son-dynamo-headights02

Schmidt’s dynamo hubs and lights are beautiful and come in a range of colors and outputs.

edelux-son-dynamo-headights04

The Edelux II is brighter and has a beam pattern that’s about twice as wide, spreading a 12m beam pattern across the road.

edelux-son-dynamo-headights06

edelux-son-dynamo-headights01

The lights are powered by one of several hubs, with options based on where you value weight, output at low speeds, disc brakes, etc.

edelux-son-dynamo-headights05

Here’s what’s inside them.

e-ram-crank-based-add-on-e-bike-motor01

Dienatronic’s E-Ram e-bike kit puts the motor around a crank arm to assist your pedal efforts. But, what sets it apart from the Pendix Efreshed system is the battery pack:

e-ram-crank-based-add-on-e-bike-motor03

This 50V pack sits on your back. Just slip it in your backpack and run the long power cable to a plug on the bike:

e-ram-crank-based-add-on-e-bike-motor02

It has an easy breakaway so your bike won’t be dragged along while you rag doll down the mountain. The design mounts to any standard threaded BSA bottom bracket shell and is designed to work with full suspension frames.

samsung-e-bike-battery-packs02

Ever wonder what’s inside those giant battery packs? Samsung took the cover off for us, showing that most are comprised of smaller cells arranged in a series to create higher voltage and amps. Depending on how you connect each end of the battery to the next one, you can bump either one, and if you connect bundles of them the other way, you can affect the other.

samsung-e-bike-battery-packs01

Science lesson: If you connect all of the positive sides together in parallel, you’ll increase total current (measured in Amps), which makes for a higher volume of electricity. If you connect them in a series, where a battery’s positive side to the next battery’s negative side, you increase the voltage (Volts), which is makes the power delivery faster, but doesn’t increase the volume. By wiring batteries in a combination of parallel and series, you can get the desired number of watts and control output, run time, etc. Volts x Amps = Watts. Parents, this makes for a great science experiment when making your own electromagnets, BTW.

skully-solar-powered-bicycle-headlights-and-ninjas01

We’ve got dynamos and we’ve got batteries, and now Skully wraps things up for us with solar. The larger Skully lights in the foreground have solar panels on the top to capture light and charge their batteries, which then power blinky LED eyes and the larger see-where-you’re-going reflector at the mouth. Those lights in the background? They’re powered by ninjas.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

10 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
NASH
NASH
9 years ago

That battery pack is a lazy design, looks something I would have made for a school project aged 12.

Gunnstein
Gunnstein
9 years ago

“you increase the voltage (Volts), which is makes the power delivery faster” -> Hm… I don’t think an electrical engineer would approve of that interpretation. I’d rather say: “which makes it likely to hurt more if you lick the connectors”. Up to a point of course. With enough voltage it doesn’t hurt at all 🙂

Laurens van Rooijen
9 years ago

Those brake lights for road bikes are from S’Sun (or their commuter brand Illumenox) like the Skully and Ninja lights. Still have a pair of those lying somewhere in my home office to test.

At first I wondered who would ever need brake lights on a road bike. Then I visited Taiwan and saw huge groups of road cyclists go for rides after work – and yes, it gets dark in Taiwan darn early all year round. Only thing I miss on the Sweet Potato Island, really: Those long summer evenings.

Chris
Chris
9 years ago
Greg
Greg
9 years ago

Rag dolling with that battery pack stuck to one’s back doesn’t seem like a good idea.

Wolfman
Wolfman
9 years ago

I just got one of those brake lights last week. Totally silly, but makes me smile to have it there. Great small stocking-stuffer idea for the holidays, if you need something like that.

Slow Joe Crow
Slow Joe Crow
9 years ago

You missed out on one of Schmidt’s slicker items, the connectorless front dynamo hub intended for custom builds. This uses a special dropout with a contact pad instead of a plug in connector so it looks much cleaner and you can easily remove and replace the front wheel without having unplug and replug the dynamo hub.

Francois
Francois
9 years ago

The brake light is pretty useless if you brake with your front brake, which is what you usually do when you’re commuting…

Pabcor
Pabcor
9 years ago

Ilumenox Nano and Nano Duo 36, 37 pages
http://www.ilumenox.com/PDF/Catalogue_2014_ilumenox.pdf

jeff
jeff
9 years ago

Speaking about any light that uses batteries, especially those small watch type batteries, is something I’ll never use again. In my experiences, they dont last that long and each battery is around $3-$4, some take two batteries. The only way to go for me is USB charged lights, maybe slightly more expensive to purchase, but the cost of not replacing batteries makes up for any upcharge.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.