Home > Bike Types > Mountain Bike

EB14: MRP Waves Good Bye to Narrow Wide, Wiggles New 1x Chainrings into Production

8 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (6)

Clearly, 1x drivetrains are so hot right now. At the center of the trend is the concept of the narrow wide chainring which uses alternating tooth profiles that are thick then thin to essentially grab the chain and keep it from bouncing off. Like all drivetrain components, chainrings wear and one of the concerns with the narrow-wide design has been the ability to retain the chain retention properties once the wide teeth start to wear out.

MRP’s answer to the quandary is to get rid of the narrow wide tooth profile all together. So how do you make a chainring that will retain the chain without the narrow-wide teeth? For MRP it’s all about riding the wave.

Full details on the new Wave chainring plus new chain guides, forks, and more, next…

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (2)

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (5) MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (4)

Instead of forcing a wider tooth between the chain plates, MRP’s design pushes only one side of the chain. In order to keep the chain planted on the ring there are three tooth positions, left, center, and right. The teeth alternate from left to right and then right to left in a wave pattern that causes the chain to ride in a wave pattern on a small scale as it passes over the ring. Since the teeth are only pressing against one side of the chain, MRP claims the design offers increased security with less concentrated wear than other narrow wide chainrings.

MRP’s Noah Sears and Nick Simcik say that they have been testing the design for more than 6 months now with excellent results. The rings are machined from 7075 aluminum and are compatible with 9, 10, and 11 speed chains. Chain rings will be available in 4 bolt 104 BCD for 30, 32, 34, 26, and 38t, 5 bolt 110 BCD in 38, 40, and 42t rings, as well as SRAM direct mount options for GXP and BB30. The GXP DM rings use a -7 mm offset for a chainline that is 1mm narrower than previous, and both GXP and BB30 DM rings will be offered in 28, 30, 32, 34, and 36t. Four bolt rings will retail for $49.95, 5 bolt for $59.95, and DM for $79.95. Chainrings will start to be available in a staggered release late this year and into early next year.

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (14)

Spotted first on the Reeb Cycles DJ bike, MRP is now offering their Slope DJ fork for either 26 or 27.5″ wheels. Based on their 34mm chassis, the forks will have 100-120mm of internally adjustable travel with an extremely progressive EQUALair spring that will allow for aggressive riding with low air pressure.

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (1)

Equipped with standard rebound and compression adjust, Slope forks come in around 4.3 pounds with a tapered steerer and 15mm Qtaper axle. Slope forks will retail for $899.

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (10)

MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (13) MRP New Wave Chainring narrow wide non drop carbon chain guide slope fork (8)

In the chainguide area, MRP is introducing carbon models of their SE, FD, and new CX1 seat tube mount 1x guides. The guides use either pressed or machined carbon mounting brackets and offer lighter weight at $115 each. Their ISCG 1x guide will also get a bit of an upgrade as they have determined that 2 mounting bolts are all that is necessary. The removal of the third bolt and machining away of half of the aluminum mounting structure will reduce the weight of both the aluminum and carbon mounts.

Speaking of carbon, MRP has a new front derailleur mount cover for the true weight weenies out there. The carbon FD mount cover comes in at just 4g for the cover and the bolt, and will retail for the same price as the decapitator if you value weight over post ride beverages (or are ok with cracking beers open with your pedal).

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

8 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
gringo
gringo
9 years ago

(deleted)

JAKE
JAKE
9 years ago

Does the narrow wide put undo stress on the plates its pressed in-between? or do the wide teeth wear out fast enough to kind of adjust to the chain.
I can imagine a chains bushings get getting loose and the chain becoming noisy. Chains and chain rings are going to be even more a standard repair item. dealers will need to be aware.

Von Kruiser
Von Kruiser
9 years ago

Long term wear on any single ring will be faster then sharing the load between double or triple for sure. The thinner teeth will be an issue on the MRP. However if you are aware of this issue it’s really not a big deal (unless it wear too much too fast). Replace your single ring and chain more often will just be normal for this set up. Hell I need to replace my chain way more then I currently do. It’s the stretching of the chain which kills the teeth more then anything… unless you live in the North where grit is a big issue on wearing everything out. I like the direction of MRP group and Nick Simcik is the man… super good guy.

J Train
J Train
9 years ago

Would like to see a video of the chainring turning a chain. As for now, I’m smitten with my WTC and happy to support a small company and 100% American produced product.

jeffle
jeffle
9 years ago

Nice to see more development towards xx1 ring alternatives. Sram charges way too much for a product that wears way too fast.

tlove
tlove
9 years ago

if the concern is the wide teeth wearing out then why not go to a stainless ring? possible?

Davechopoptions
Davechopoptions
9 years ago

Should allow the chain to seat onto the teeth more reliably in really muddy conditions where many brands of thick thin rings suffer.

Dr. Sartorious
Dr. Sartorious
9 years ago

So…the solution to wearing out every other tooth is to…wear out only one side of all teeth?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.