Home > Feature Stories

SOC14: Manitou McLeod Rear Shock Digs Up Massive Adjustability in Modern Air Platform

5 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

Teased earlier and thought to be a new suspension fork, the Manitou McLeod turned out to be a rear shock designed to pair with their new Mattoc fork.

The shock is aimed at the high end, with full featured external adjustments, a slew of impressive compression and rebound damping technologies. All in a package with less moving mass for faster response to changing conditions and multiple platform settings to fine tune the pedaling to your liking. It all sounds impressive, suggesting performance could be on par with some of the best air cans out there.

Want more details? Saddle up and get ready for some trail work…

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

Manitou McLeod shock factory clean room4 Manitou McLeod shock factory clean room3

Manitou McLeod shock factory clean room2

As one of Manitou’s premiere products, it joins the Dorado in their clean room manufacturing facility. Easily one of the cleanest work spaces we visited in Taiwan, only the best, highest trained employees work here using cellular manufacturing that you find in the rest of the factory. More on the factory coming soon!

Manitou McLeod shock factory clean room

New for the McCleod and for Manitou is using a water transfer decal for the finishing. the technique needs some special machinery like this dishwasher looking unit that arrived in Taipei just before we did. Water transfer decals are more durable, and add a premium aesthetic.

While the shock uses a standard air can for the main spring, the McLeod features a unique non-adjustable negative spring. Essentially the negative spring is created when you slide the air can on the shock body, trapping air between two seals which acts as the spring. Technically there is no “official” way to tune the negative spring, but we’re told that if you use a hair dryer on the can during assembly, the hot air will be less dense and offer a different tune.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

At the heart of the McLeod’s damping is the all new IPA (Incremental Platform Adjust) where each click steps up the platform on the shim stack. IPA includes 4 platform settings with the first fully open for max flow, the second offering improved control, and the third and fourth acting as heavy pedaling platforms. Rebound control is given through the center knob which offers full rebound adjustment in one turn, without any detents.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

The reason the rebound adjuster lacks detents, is that the patented adjuster mechanism hides the rebound control shaft inside the compression control. Using an all metal construction, the rebound knob has a reverse thread, so as you turn the rebound knob clockwise it moves the ramp of the adjuster against the rebound shaft changing the tension on the shim stack. This is what controls the flow of oil through the bottom of the damping shaft, while a check valve prevents fluid from being forced through the rebound circuit during compression.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

When the compression lever is turned, the outer cylinder of the adjustment tube presses against the compression rod and actually presses against the shim stack forcing them against the piston head as the shims are pressed into a more conical shape, it takes more pressure for the oil to be forced through which provides the platform damping.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

Most users probably won’t mess with any of the more advanced adjustment, but there are a few tricks available for the expert mechanic. Mostly they involve the allen screws in the shock head that act as stops for the adjustment knobs. Playing around with these can result in some custom lever action and damping settings but it’s not something that Manitou is really pushing.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

This side view shows the rebound adjuster outside of the compression adjuster that it is inserted into, and the assembled damping system.

2015 Manitou McLeod rear air shock for mountain bikes - internal parts actual weights and tech details

Initially, the McLeod will be available in 152×32, 216×63, and they are testing a 222×65 model, but after that they are getting to the limits of the IFP. Look for it to be spec’d as OEM equipment on North American and European bikes with aftermarket availability expected in early summer. Pricing is TBD and should be competitive with top of the line Fox and Rockshox products.

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

5 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
bono
bono
9 years ago

Looks promising. Had manitou a few years ago, longest lasting shock I’ve ever had, always performed the same time and time again. Best of luck to them.

Matt
Matt
9 years ago

Isnt’ that how the negative spring works on all air cans? Looks interesting, but a bit of a dated design

k
k
9 years ago

rs air shocks and i think fox as well, and db air all use a dimple or hole in the air can (depending on hv/double section can, or single can) to transfer air to the negative that way the air pressure in the negative is relative to the positive, not a fixed amount. ie 100 psi in positive, 100 in negative.

Christian
Christian
9 years ago

Is it just me or does the black knob in the first disassembly photo look like it has a beer stein on it??

VoltesV
VoltesV
9 years ago

Good catch on the beer stein…maybe due to the IPA acronym??

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.