Home > Bike Types > Mountain Bike

DVO Teases Soon to be Released Diamond Enduro Fork

9 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

DVO Diamond 27.5 ForkHot of the success of the recently launched Emerald downhill fork, DVO will soon be launching their new Diamond platform. Using many of the technologies developed for their top tier dual crown fork, this trail fork eschews the current trend of simplifying tuning options. Instead, it introduces an unprecedented amount of  user serviceability and customization.

So drop past the break to learn what all the knobs do!

DVO Diamond Side ShotThe Diamond is expected to retail for $1,100 and should be available next month in a 140/150/and 160mm (all internally adjustable via a step ladder system) travel for all  three of the current wheelsize standards.

This model  only arrived the day before the show and was not fully assembled, although they did have several of the internals available for photos.

DVO Diamong AdjustmentsOn the air sprung fork you will find the typical high and low speed compression adjustments, which Bryson Martin tells us are generic, but offer a good tuning range when coupled with the other built in tuning adjustments built into the fork.DVO Diamond Negative Spring

The OTT adjustment compresses a smaller secondary spring, housed within the main negative spring assembly

For example, the OTT (Off The Top) dial allows you to adjust the negative air spring. This means even riders of widely different body weights can still get the same level of performance out of the fork, because it can be tuned in conjunction with the air spring to dial in sag.

According to their sponsored racers, the adjustment makes a huge difference when switching from hard pack terrain to loam, because in hardpack you need more sensitivity of the top in the initial 30-40mm of travel to maximize traction.

DVO Bottom Loader Shim StackAt the bottom of the fork, The Loader compression adjustment assembly system allows riders to tune any part of the stroke with a set of shims. An aftermarket shim kit (seen here) which is available for both the Emerald and Diamond forks, will allow users to tune the fork for different terrain in a way you simply can not with adjusters. This aftermarket loader can be installed quickly without requiring a full fork rebuild, so racers can quickly try out different tunes between practice laps.

With the emphasis on tune ability, it should also come as no surprise that DVO also has full tech break downs off all the different features, a portion of the site where riders can share their preferred settings, and will also custom tune your fork for your riding style directly from the factory. Check it out and more at DVOsuspension.com.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Seraph
Seraph
9 years ago

I hate to be *that* guy but it looks really really cheap. Kinda like an SR Suntour.

J N H
J N H
9 years ago

Hey ‘that guy,’ do you know that DVO forks are in fact made by Suntour, albeit on separate production line? I think the internal look pretty good, although Euro prices remain to be seen.

Seraph
Seraph
9 years ago

Well J N H that explains why it looks kinda bad. Internals speak for themselves though.

Legalaze
Legalaze
9 years ago

Hey ‘that guy,’ do you know that Durolux as plush as Pike, but with both slow and high speed compression adjustments? You can also get on-the-fly travel change from 160mm to 120mm or 180mm to 140mm by just pressing a button.
Suntour forks may be cheap, but almost no one can withstand their performance.
sry for bad english

J
J
9 years ago

@ Seraph: At least the fork is not made by SIDI. Am I right?

Antipodean_G
9 years ago

The guys behind Devo are a great bunch with more experience than most can poke several sticks at. I personally prefer something to work really well first and foremost and I am sure these are going to be great forks.

Bryson Martin Jr
9 years ago

We appreciate the comments guys. Remember this is literally the first prototype. As we did with the Emerald, we are showing every step in the development process of the Diamond. The final production version won’t disappoint!

Jonathan Stanley
Jonathan Stanley
9 years ago

What are/will be the fork offsets for the 26er, 27.5/650B’er and 29er versions?

Iwan
Iwan
9 years ago

Hey Bryson,

When will these be available? Planning a build and would love to one of these on the bike.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.