Home > Feature Stories

Exclusive First Photos of The New Santa Cruz Nomad, Plus Weigh In!

14 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Santa Cruz Nomad2 and Nomad 3

When we arrived, the mean green Nomad 2 C was sharing its last few moments on the showroom floor with the new Nomad 3.

After staying up late to glean through a press release and bring you detailed coverage of the new Nomad, I woke up bright and early to visit the Santa Cruz Factory and take some pictures of the bubble gum pageant queen. While at HQ, we had the opportunity to discuss the bike with both Marketing Manager Will Ockleton and Sr. Engineer Nick Anderson.

Drop past the break to check out some pretty pictures and learn even more about the new bike! And in case you missed it, here’s our initial coverage with a Q&A from Engineering and Quality Director Joe Graney. 

Santa Cruz Nomad 2 Old and Unloved

We had barely gotten our camera out when SCB Receptionist Maggie slipped off with the Nomad 2 that had been on display on the factory floor. As they say “the king is dead, long live the king!” and then we turned our attention to the new Monarch.

It's Not Pink, It's Magenta Nomad Shirt

But before we started snapping away, Production Coordinator Ryan Heywood stopped by with an important message from Rob Roskopp.

Santa Cruz Nomad 3 New Headtube Badge

At the head of the bike you’ll notice an all new headtube badge. The simple logo will likely adorn future models. R.I.P. S-man.

Santa Cruz Nomad Grips

Peaty grips are matched to custom SC lock on grips. Its the small details like this that really make the bike stand out when you get up close.

Santa Cruz Nomad Top tube Art Bubble Gum

Earlier today we called it “internal routing,” but just like Joe Graney’s “bus” there’s a lot more than meets the eye. Santa Cruz has a reputation in the service department for being some of the easiest bikes to work and they refused to buckle to the internal routing trend until they could do it right. Their implementation allows you to turn the bar completely without generating cable rub.

They’ve achieved this by crossing the rear derailleur cable and running it on the left side of the headtube, while the Reverb Stealth port is located on the right. The molded carbon fiber tubes eventually cross, but carry the housing to their respective destinations without interruption. You may think I’m putting a lot of emphasis on how awesome this routing is, but anyone who wrenches on bikes will understand and share my enthusiasm.

Santa Cruz Nomad3 Matching Decals

Fork, wheels, frame, and suspension, all share matching hues of magenta and lilac blue.

Santa Cruz Nomad3 650b Enve M70 Wheels

Another close up of the new ENVE Carbon wheels we can’t talk about…

Santa Cruz Nomad 3 Seat Post Clamp

In order to make this giant beast of a bike friendly uphill, Santa Cruz has made several important changes to the ‘Mad. The one you’ll most easily detect is the change in seatpost diameter due to the new seatpost clamps. Due to the low standover on the smaller size frames, the team wanted a seat tube that was long enough to accommodate a 6″ dropper post, so that small riders could get the seat low enough. The only droppers available in that length require a 31.8mm diameter, so the new model now features a larger seatpost tube than the other full suspension bikes in the catalog.

The seat tube angle was also made steeper because the more travel a bike has, the more weight you put on the rear suspension as you climb. So as you start uphill, the bike sits further into its sag, which causes the front end to wander. By steepening the seat tube angle and increasing the reach of the bike, you place the rider in a better position over the BB when negotiating hill climbs.

Santa Cruz Nomad 3 Upper Link

As part of the move to make the bike more pedal friendly, the team created an upper link that would allow them to shorten the seat tube so you could fit a longer dropper.

Santa Cruz Nomad Linkage

Santa Cruz Nomad Shock Setup

Both the shocks that will be spec’d on the Nomad, the Vivid Air and New Monarch Debonair,  have a stiff negative spring that works well with the progressive nature of VPP suspensions and offer a very supple feel at the top of the stroke.

Santa Cruz Nomad Water Bottle Mount

Hydration bag haters rejoice. If you lust after this bike, you won’t need to resort to a fanny pack or fancy bib to carry water.

Santa Cruz Nomad3 650b No FD Rear Chainstay closeup

The big news is the Nomad’s complete lack of front derailleur compatability. During the bike’s development stages, the engineering team really struggled to find a way to shorten the chain-stays while maintaining  FD clearance. Its an issue that many manufacturers have struggled with, but it was mid way through the development cycle that a viable solution came in the form of the XX1 drivetrain.

After the decision was made to ditch the extra shifter, the lower link could be recessed to avoid excess mud buildup and rock strikes. This also allowed them to use a symmetrical chainstay, which offers a small advantage in stiffness. The dedicated trail models will still retain the asymmetrical chain stays for FD clearance, because in many parts of the world that compatability is still a necessary evil.

Santa Cruz Nomad3 650b Chainstay

The chainstays on the 165mm travel big bike are now the same length as those found on the 125mm travel Solo 5010.

Santa Cruz Nomad3 650b Tire Clearance

The show room bike was sporting 2.3″ Maxxis High Roller 2s front and back, but the bike was designed with enough clearance for up to a big 2.5″.

Santa Cruz Nomad

Real men ride pink (er, magenta), but if you prefer black…

Santa Nomad3 650B

I know, its hard not to drool.

Santa Cruz Nomad Stem

At a cursory glance of the geometry figures, the Nomad/Solo/Bronson may share the same top tube figures, but the Nomad sports a longer reach than previous models. The new geometry combined with the bike’s gravity intentions mean this bike comes stock with a 50mm stem. The 800mm wide carbon RaceFace bars are also a nice touch.

Santa Cruz Nomad 650b Cockpit

While it may not be obvious from the image, the bar and stem combo use the new 35mm standard.

Santa Cruz Nomad3 650b Downtube Details

The more time you spend looking at this bike, the more the attention to detail impresses you.

Santa Cruz Nomad3 650b black

The lower link now uses only one grease port to lubricate the 4 bearings.

Wonder how the new link looks in action? Watch this clip to see the bike cycled through its suspension a few times.

Santa Cruz Nomad X01 Build Weight Scale Shot

Weight fluctuates easily with tires, but this X01 equipped model with optional Enve wheel upgrade and make-no-compromise-tires weighed in at 27 lbs, 7 oz or 12.4 kg. That is .2 kg lighter than claimed and it will only set you back $8,344. Currently the cheapest build available is the X01 kit pictured here sans Enve wheels. That setup will retail for $6,599. There is currently no plan for an aluminum model, although SCB has a history of releasing more budget friendly options after the initial carbon launch.

Special thanks to Will, Nick, and Maggie for taking the time to chat with us!

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

14 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
DaveMK
DaveMK
9 years ago

Great work Santa Cruz and Bikerumor! I have never been more excited for a bike. I can’t wait to shell out my cash for this one.

Dan
Dan
9 years ago

I love the way full cable housing shifts

Henry Abel
Henry Abel
9 years ago

The tech specs page on the Santa Cruz website says that the new Nomad seatpost is a 31.6, not 31.8.

pornitswhatlwouldratherbmaking
pornitswhatlwouldratherbmaking
9 years ago

Awesome! Choices choices. The new carbon Tracer or this, hmmm…. Now the issue of money.

GunxRider
GunxRider
9 years ago

Call me old school, or just call me old, but my Superlight and Bullitt are both running as solid as ever. But when it comes time to throw down and upgrade to the latest generation of bikes, I can absolutely guarantee it will be from Santa Cruz.

Topmounter
Topmounter
9 years ago

…front derailleur comparability?

Fattylocks
Fattylocks
9 years ago

” only set you back $8,344 ” Only? Really? That’s a lot of coin, in anyones book.

Slackboy
Slackboy
9 years ago

The cable routing is awesome IF you can brake yank style. For most of the rest of the world and those who run Moto, the brake routing fails the rub test.
Other than that tho…..

Robbo
9 years ago

I love how you say ‘only’ $8.3k… 😉 And +1 on the seatpost thing. No such beast as a 31.8mm post. Yet. Give it a week, though – someone will invent a new standard. Still, that black one is the cat’s meow.

CT
CT
9 years ago

I am man enough to ride pink (er… magenta), just not rich enough… not for a long while anyways…

satisFACTORYrider
satisFACTORYrider
9 years ago

glad they got rid of that ugly hump of a tt.

K11
K11
9 years ago

@satisFACTORYrider. i agree.

I my opinion, it has some similar visual cues to the Turner czar.
The czar still takes the design aesthetic award! (yes i understand it is a different bike category)

ccolagio
ccolagio
9 years ago

ALUMINUM. I’M WAITING FOR YOU.

throwback
throwback
9 years ago

Beautiful bike and another fine piece of work from Santa Cruz. This is on my wish list once my ML8 stops working. Trouble is, it’s an ’05 and works like it will last another 10 years at least. Guess I’ll just have to wait for the Nomad v5.0 instead. It’s cool to see a sub-30 pounds 6+ travel bike, I just don’t understand the need for all the fancy carbon (frame, wheels, cranks, etc.); the fact that my decade-old aluminum Maverick can do exactly the same thing with the same travel makes me wonder a bit about the state of tech in the industry these days. Still, a pretty rig that I would love to ride (probably not in magenta though…).

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.