Home > Bike Types > Cyclocross

NAHBS 2014: Calfee Updates Manta Pro, Adds Cyclocross Prototype & Builds a Tandem for One

11 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Calfee-Manta-Pro-road-bike-updates

Calfee has updated their Manta Pro endurance road bike with new options, including a “lockout” block to convert the soft tail design into a hardtail, thru axle options and further refinements to the design.

There was also a prototype Manta Pro Cyclocross bike in the booth, plus a new version of their famous tandems that lets you convert the front and rear sections into a fairly normal one-person road bike for those days when you’re stoker’s a slacker.

Calfee-Manta-Pro-road-bike-updates

For the Manta Pro, new dropouts give you the option to run thru axle rear hubs.

Calfee-Manta-Pro-road-bike-updates

Some riders requested a way to occasionally eliminate the suspension offered by the soft tail design, so Calfee is now offering an alloy insert that replaces the elastomer, effectively locking it out. It’s all user serviceable, so you can switch back and forth, or even swap elastomers to tune the ride, on your own. Note the internal Campy EPS battery charging port just in front of the bottom bracket shell.

Calfee-Manta-Pro-road-bike-updates

Disc brakes are now an option, too.

Calfee-Manta-Pro-cyclocross-bike-prototype

The Manta Pro ‘cross bike has been doing well in their tests, but they will be offering additional clearance for the rear tire. Which would then make it an even better gravel bike, too. It’s all custom, so once they’ve got the new chain stay yoke dialed, you can make it whatever you want.

Calfee-Manta-Pro-cyclocross-bike-prototype

The support struts were added to the chain stays late last year to change the flex point of the rear suspension.

Calfee-Manta-Pro-cyclocross-bike-prototype

Yep, definitely needs a bit more clearance for cyclocross tires. They offer the Manta Pro in gravel road bike variations, too, and that one will likely get the added clearance as well.

Calfee-convertible-tandem-road-bike

Their travel tandems can now be made with a revised S&S Coupler placement. The two bikes shown here place a coupler just in front of the BB on the down tube, which separates the front triangle from the center section. The rear triangle and seat tube also detach. Those two sections can then combine to create the one-person bike shown above.

Calfee-convertible-tandem-road-bike

The reason for the bump on the down tube is that the S&S piece sticks out much further inside the tube than outward appearances would suggest. These are some of the first convertible tandems they’ve made, so it was more a case of proof of concept here. They’re working on a curvier down tube design that’ll hide the bump in a more elegant, swoopy frame.

Calfee-convertible-tandem-road-bike

The design was sparked by customers’ stories of occasionally having (wanting) to head out on a ride solo while on vacation and feeling rather ridiculous riding a tandem by themselves. Calfee’s Michael Moore says it would take the average cyclist about 25 minutes to convert it from a tandem to a solo road bike.

Calfee-convertible-tandem-road-bike

Calfee-convertible-tandem-road-bike

CalfeeDesign.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

11 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Simon
Simon
10 years ago

I for one want to know more about that blue anodized cassette!

NASH
NASH
10 years ago

I for one want to know more about that elbow joint ref S034!

J Train
J Train
10 years ago

I am decidedly not drinking the Calfee Kool-Aid. I appreciate their innovation, especially the tandem stuff, but the soft tail and suspension struts are just hideous, in my opinion. I imagine the elastomer will pack full with grit on the CX/gravel bikes.

WoofWoof
WoofWoof
10 years ago

The cassette was a mix of gold and blue, depending on how you viewed it in the light. Sparkly mmmmm.

MB
MB
10 years ago

The tandem is hideous. There are so many folks doing that with fewer splits (lighter) and ones that don’t make it look terrible.

Jeff
Jeff
10 years ago

J train, they do not use elastomers, they use springs. On the CX bike they also used a piece of inner tube over it for a seal. The struts are odd looking… they are carbon fibre inside and the stainless is just a protective tube. Supposedly more effective and lighter than beefing up the BB area and stays to provide the lateral stiffness and flex point they wanted.

Loki
Loki
10 years ago

@MB

Er, no there aren’t. (I’d be happy to be corrected if you know of any) There are many tandems that split for travel but I know of only one other tandem design (in 3 versions) that becomes a ride-able single and the other design is definitely not lighter or more elegant. (It’s called the 8-Ball).

The whole point is that these are the first convertible tandems, not the first traveling tandems.

Fair Wheel Bikes
10 years ago

The cassette is a recon and shifts color with the angle. http://fairwheelbikes.com/images/Recon_Cassette_Aluminum_11spd_Blue_Parent.jpg

aaron
aaron
10 years ago

@MB and in addition to Loki
Its also Carbon, which is lighter than the Rodriguez steel frame

Robooble
Robooble
10 years ago

@ Jeff: “Supposedly more effective and lighter than beefing up the BB area and stays to provide the lateral stiffness and flex point they wanted.”

Nope. I have a hard time believing Cannondale would have passed up on this *epic* design solution to go with the design they used the Scalpel; i.e. flattened mid-sections on the chainstays. Craig used what he had sitting around, period, end of story. Retooling his stays would have been the proper engineering decision, but would have taken more time, engineering, and mould making than he was willing to invest. So they came up with this and are trying to sell it as if it was a first choice option. It gets bikes out the door quicker, which is obviously his motivating force lately, considering that tandem he showed, which was quite obviously just a concept he *really* wanted people to see in its unfinished form.

Joshua Murdock
10 years ago

Sweet, more awful designs from Calfee. I always wanted a flexy, poorly designed, ugly, antiquated and overpriced bike. Are there really people out there who buy this garbage? Give me a break. It’s a good thing Calfee is in the carbon repair business…

Also, anyone who is going to pay the insane premium they’ll charge for that tandem could buy a nice purpose-built tandem, two nice individual bikes and a vacation to ride them all on.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.