Home > Bike Types > Cyclocross

Wolf Tooth Components Gears up for BB30, S-Works/Lightning, Adds Products that Aren’t Chainrings

20 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

SWX 1 Wolf Tooth Components WTC

Just when you think Wolf Tooth Components had all the chainrings covered, they introduce another one like the new S-Works chain ring above. Designed for direct mount Specialized S-Works and Lightning crank sets, the rings replace the existing chain ring and spider. While having a 50mm chainline for compatibility, the rings also offer the WTC Drop-Stop tooth design which we’ve been testing here with great results. Available in  32 and 34t rings only at this point, Brendan says they may expand the offerings if the demand is high. Weight is 71g for the 32 and 80g for the 34, and both rings are available in black 7075 aluminum for $78.

Running BB30 and want a direct mount Drop-Stop Ring? Check out WTC’s new offering plus some new goods that aren’t chain rings after the break!

GXP32tBlack_1024x1024

Using the design for their SRAM GXP direct mount chain rings above, WTC has created a new version for BB30 cranks with the right offset for the proper chainline. Production will start with 32 and 34t rings, but 28, 30, and 36 are soon to follow. Due to the fact that the rings have 5mm less dish than the GXP direct mount rings, the added benefit is their use on fatbikes with 190mm rear hubs. WTC did some testing with a Borealis Yampa, X9 fatbike crank, and super wide 4.5″+ tires on 100mm rims and found that the BB30 ring was needed for use of all the gears on the cassette without the chain rubbing on the tire.

bolts 4 Wolf Tooth Components WTC

bolts 6 Wolf Tooth Components WTC

If you’re not running a direct mount ring, you’re going to need chain ring bolts – especially for the direct mount 30t 104 BCD rings. If that’s the case, WTC has you covered with their new 7075-T6 aluminum chain ring bolts. Available in 6 or 10mm lengths, the 6mm bolts include nuts for standard 1x drive train conversions, while the 10mm size is meant for the previously mentioned 30T ring for use without nuts. Each size uses a 5mm hex for the bolt, and the corresponding nuts are tightened with a 6mm hex instead of the standard chain ring slot. Both sets of bolts are compatible with WTC or any other chainrings with standard mounting holes or M8 x 0.75 threading.

bolts_10mm_2_1024x1024

The 6mm bolt and nut sets are available in 4 packs for mountain bike cranks at $28 and 5 packs for road and CX cranks for $35. The 10mm bolts are sold in 4 packs without nuts for $17. Like all the other WTC products they are designed and manufactured in the US, and even include the bolt length laser etched on the head for easy identification. Bolts are available in red, blue, green, black, and silver with weights listed at 4-9g per set.

opener 3 (1) Wolf Tooth Components WTC

Wolf Tooth is even making a bottle opener, though this one’s more than just a one trick pony. In addition to releasing your favorite libation from its glass prison, the WTC bottle opener also has a built in slot for truing your disc rotors. The hole in the corner makes for easy keeping on your key chain, peg board, or d-ring and they’re made in the US from 7075-T6 aluminum.

opener_2_1024x1024

Available in the same anodized colors as the chain ring bolts, the 32g openers will retail for $19.90. Want WTC gear but can’t find it at a shop? You can find everything on their site with free shipping for orders over $39.

 

 

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

20 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
B
B
10 years ago

+1 for their chainrings, there are a few at my shop already and they are rockin, spiderless sram and 102 BCD are a great fit.

Shane
Shane
10 years ago

Sweet, BB30 Sram will be ordered

bike gang
10 years ago

It’s not wood

It’s not good.

What What

BIKEGANG

Ck
Ck
10 years ago

One of their DM rings is definitely on my list when I switch to 1x.

CXdude
CXdude
10 years ago

I can see this in the 39-42 tooth range for CX setup’s! BRING IT OUT!

Thumper McDonut
Thumper McDonut
10 years ago

Oh thank God! They thought of another tool that could be integrated with a bottle opener! That’s the ONE thing my toolbox was missing that’s bottle opener compatible.

Ed
Ed
10 years ago

Which mtn SRAM cranks require different spiders for GXP vs BB30? I have an X0 of each and the spiders are identical (except the laser that says ‘BB30’ or ‘GXP’).

Anonymous
Anonymous
10 years ago

Wolf! How about some 38/40/42 single rings for a cheap XX1 cassette conversion. Something similar to the General Lee cassette but just a single ring machined to fit perfectly without shims for Shimano/SRAM. I have the ebay steel ones, meh.

roofbrain
roofbrain
10 years ago

endless is better, just ask them, they will tell you. because they say they are. dont question it.

Ed
Ed
10 years ago

@Zach – I don’t think Mtn BB30 has a narrower Q. It does give the option of giving more heel clearance for the same Q (which would mean a different spider to get the rings back to the correct place) but it doesn’t look like X0 has taken advantage of that. Are there SRAM mtn cranks that do require different spiders for GXP v BB30?

Velo Zephyr
10 years ago

Wolf Tooth, I’d love to see this in some 42-48T sizes for CX and single ring road or commuter bikes. Looks great otherwise!

Brendan
10 years ago

@Ed
The BB30 spider has 5mm less offset toward the frame (or Dish in the case of our ring) vs the GXP. If you use a GXP ring on a BB30 crankset it can work and will fit the spline, but there is often frame interference with rings larger than 32t and the chainline is off from optimal by about 1 cog (~5mm between cogs).

-Brendan

Lukie
Lukie
10 years ago

When are the BB30 direct mount rings availiable? Want.

nick
nick
10 years ago

@brendan

i’m curious on this as i currently run an MRP on a BB30 1400 crank on my singlespeed and was looking at the same thing for a 1x setup.
given this is on a 68mm frame with an FSA 386 BB – i don’t see how the offset is ever different? they both have the same width spindle, this is why the BB30 one needs the spacers when on a true BB30 frame.

bin judgin
bin judgin
10 years ago

WOOF TOOF!

Sstoz Tes
Sstoz Tes
10 years ago

Another vote for >38t 1x rings. Strong/stupid/masher/ignorant climbers like myself are looking for alternatives to the cage au chain guide folles. CX’ers and commuters, too. Even the crusty, cynical, nothing-is-new-but-the-hype, fgfs-hater bicycle technician at my local shop, who I count as a close personal friend =), is interested in a 41t 1x ‘ring. My own mother asked for a larger ring so she could go a bit faster when she catches a tail-wind (she uses a 38t now), though she wouldn’t know a 1x chainring from a 10×10 board. My own mother!

MB
MB
10 years ago

@Sstoz Tes – Wolf tooth told me they weren’t making 38t+ anytime soon as the demand isn’t there. Absolute Black said they have it in their plans (spiderless too), but they are getting some other stuff made first. Race face is the only one I could find in 38t+ and so far has been working fine, but alas no spiderless.

K11
K11
10 years ago

Wolf Tooth is my favorite new made in the usa company.

I will be placing my order, others need to support them, skip the taiwan/china made products regardless of price.

Darryn
Darryn
10 years ago

Because drinking beer and straightening rotors is a great combination.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.