Home > Other Fun Stuff > Uncategorized

Just In: All New DJSinglé from SUNringlé – DJ Wheels with Stéézé

9 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels500

26″ wheels aren’t dead yet. Well, at least not when it comes to dirt jump and park bikes. While the wheel size is very much alive, it’s easy to kill individual wheels while trying to hone your skills. You need a wheelset that is burly, something that won’t immediately go out of true on your first 270° when you were going for a three. Something like the all new DJSinglé from SUNringlé.

Out of the box, the DJSinglés are ready to go with a purpose built single speed cassette body, an oversized rear axle designed for horizontal drops, and 15 or 20mm thru axle compatible front. All this, and at a price that won’t break the bank.

Flip past the break for more.

Rim close up

The DJSinglé is essentially the production equivalent of the custom dirt jump wheel set I built up years ago. Wheels that, other than replacing the occasional nipple thanks to the salt covered car rides to Rays, have been rock solid. Back then, the SUNringlé Inferno didn’t exist so it was a pair of SUNringlé MTX33s. The use of Inferno 31 rims for the DJSinglé helps to strike a balance between longevity and light weight.

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels502

At 31mm wide externally, and 25.3mm internally, the Infernos will provide a stable foot print for your tire to keep it from rolling over on side impacts. Offered in 26″ only, the DJSinglé is not tubeless compatible, because come on – no one rides tubeless on their dirt jumper. Built with a unique finish that is accomplished by media blasting the rim before anodizing, the wheels are finished off with subtle graphics that won’t make you immediately peel them off. But it that’s your choice, they are removable.

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels501

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels504 DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels505

Held in place with 32 spokes on both wheels, the hubs are one of the biggest draws of the DJSinglé. Considering the wheels retail for $499, the inclusion of a dirt jump specific single speed cassette rear hub is impressive considering similar hubs retail for over $250 alone. The use of a cassette body instead of a single speed driver like a BMX hub, allow you to fine tune the chainline or in some cases fit more than one gear on the hub. This can be used for setting up micro drives, or just having different single speed ratios ready to go.

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels509

The hub includes the cassette lock ring, but does not include a spacer kit for the cogs. These are available separately, or if you’re wanting to do it on the cheap go down to your local bike shop and ask them to save some old, worn out cassettes for you. Most of them can be pulled apart and you can scavenge the spacers inside. SUNringlé doesn’t mention this, but due to the alloy freehub body, we wouldn’t recommend use of the cheap single speed cogs because they will probably cut into the splines. Instead, use something that has a wide foot print on the freehub body, there are plenty available.

The rear hub is held in place with 3/8″ steel axle bolts that sit in aluminum caps. Specifically designed for horizontal drop outs, the hub is only offered in 135mm spacing which is the standard on most dirt jump frames. Inside, you’ll find a burly 3 pawl drive system capable of withstanding hard landings. Service of the freehub body is fairly simple using two 17mm cone wrenches, though you will probably need an axle vice after you break the first end cap free.

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels506

The front hub is shipped in the 20mm configuration, but includes the adapters need for running a 15mm axle. Both hubs are fitted with premium cartridge bearings and are 6 bolt disc compatible. The specs list the DJSinglé as having straight pull spokes, but it’s probably better that they don’t. If you break a spoke, replacements for the Wheelsmith double butted spokes and brass nipples should be easy to come by at your local shop.

DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels508 DJSinglé SUNringle Sun ringle DJ Single dirt jump park wheels507

I’ve had a chance to run a number of lighter wheels on my DJ bike over the years, but it’s one bike in my fleet that light weight usually doesn’t win out. Still, the DJSinglé  aren’t exactly heavy. In fact, considering the build they actually pretty light at 940g for the front, and 1,160 for the rear with all hardware, rim strips, and cassette lockring. Remove the rim strips and they’ll definitely be close to the 2065g claimed weight for the set.

_DSC3932

We can’t wait to get these up to Ray’s MTB to try them out! (Definitely not me above).

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

9 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Luiggi
Luiggi
10 years ago

Sad but true, the freehub is the same as the one in my Jumping Flea rear hub. It’s made of butter or some other dough-style material, so I can’t understand how do they want you to run a single cog there, unless you can get your hands in some of the expensive ones, such as Profile, Crupi, CK, Supercross, etc.

After fighting my second freehub to get the rear SRAM PG-1071 cassette out of it, I decided to use my brain a little bit and using a dremel and an old stainless steel spoke I modified two of the splines to stop the individual cogs from digging into it.

Smokestack
Smokestack
10 years ago

Luiggi- Surly makes killer non-gouging cogs at a non-killer price, as do others. Work just fine on my hub and have had no issue replacing the cogs, now on the 3rd one in as many years. Like your moxy on the improvised fix though.

Saris Mercanti
10 years ago

I hate aluminum free hub bodies, even the ones with the steel inserts, but the truth is – a little gouging doesn’t hurt anything. You just have to use a punch every time you need to pull a cassette or cog off.

dave
dave
10 years ago

Two chain whips, people. Use one to anchor and one to turn the cogs off the splines. Or you can just buy nice cogs and cassettes… Aluminum FH bodies aren’t going anywhere.

DT
DT
10 years ago

Should have done a driver disc hub. So much nicer. Micro drive for the win all day….

carl
10 years ago

@ Luiggi – VERY clever!

carl
10 years ago

@ BR – The “looks like you’ve already said that – duplicate post” is baaaack!

Luiggi
Luiggi
10 years ago

@Carl: Even more clever is buying a complete 24h Jumping Flea rear hub from Bikewagon for 20 bucks instead of paying 90-100 just for the replacement freehub ;-). Last time I checked they had several units in stock. Old Cannondale replacement parts, as stated in the hub’s box as I received it.

If the individual cogs digging into the freehub’s splines would be the only issue with these things, it wouldn’t be so problematic. But you also have to account for the miserable inner bearing in the freehub, which tends to get shredded in pieces.

Mike
Mike
10 years ago

I had SUNRINGLÉ on my Cube. Rear hub exploded after 6 months. Wheels wobbly like jello. [deleted]. I will never buy anything from that company.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.