Home > Clothing-Gear-Tools

IB13: Camelbak Updates Colors, New Lightweight XV Packs, Improves Jet Valve & (Finally) Offers a Coffee Mug!

12 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

2014-Camelbak-hydration-pack-colors-and-features

The 2014 Camelbak hydration packs get lots of bright colors to match the vibrant clothing collections from most mountain bike gear brands.

They’ve also added new lighter Mule XV and Lobo XV packs that slim down the features slightly to drop weight. XV stands for Cross Ventilation and refers to the new lightweight padding system on the back.

We also got our first look at the excellent new Jet Valve on the revised Podium bottles spotted at PressCamp this summer, and they finally made an insulated mug specifically for hot beverages…

2014-Camelbak-hydration-pack-colors-and-features

More colors and models.

2014 Camelbak Mule XV and Lobo XV lightweight hydration packs

The Lobo (left) gets a revised “beaver tail flap” front fill access. That makes it good for 24 hour races and such, speeding up pit stops by not requiring the pack to be removed for a crew member to refill it. The old style had an outward facing fill, too, this one just adds a bit more volume to the upper pocket and a more coherent look.

The NV pads are pretty soft and look like they should vent well enough. The shape and idea is modeled after the articulating NV pod pads they introduced last summer.

2014 Camelbak Mule XV and Lobo XV lightweight hydration packs

The XV models have thin removable waist straps and lose the side pockets.

2014 Camelbak Mule XV lightweight hydration packs

The Mule NV on the left looks overbuilt compared to the Mule XV on the right, but gives you more storage options in the same capacity. The XV lack of the front slot zip pocket on the outside and those aforementioned side pockets on the waist belt. The material is thinner, too, so if you’re rough on your packs, the NV will take more abuse.

2014-Camelbak-Velocity-water-bottles-new-jet-valve

The new bottles won’t start shipping for at least a month, and we can’t wait. The shape of the bottle itself is streamlined by losing the indented ridge and replacing it with twisted “Velocity” ridges. Those help it maintain shape and give you something to grab when pulling it out of the cage. They also make it easier to squeeze.

2014-Camelbak-Velocity-water-bottles-new-jet-valve

Even more exciting is the new Jet Valve cap. The original trapped the blue valve under a secondary cap that was very difficult to remove and tended to build up funk. The new design has a larger diameter opening and contains the valve within the top. It’s much easier to pull off and will make cleaning both easier and more likely to happen. Considering many of us use these around our offices on a daily basis, that’s welcome news indeed.

2014-Camelbak-Forge-stainless-vacuum-insulated-coffee-mug

The new Forge stainless steel vacuum insulated coffee cups are also welcome news. Ready to geek out? I spent an inordinate amount of time talking to Seth and Kevin about these, and it’s really interesting all of the thought that goes into designing something like this:

  • The slope and shape of the top is designed to let the coffee slowly come to your mouth so you can test the temperature, then flow quickly enough for proper drinking when you tilt it a bit more.
  • To drink, grab the cup at the top and squeeze the blue lever (under the carabiner clip). That slides the top blue piece backward just enough to open the port. The spring rate on these preproduction samples was a bit high, meaning you had to squeeze a little harder than you might want to over the course of a full mug. So, they’ll drop the spring rate down by about 2/3 so it’s super easy to squeeze but still strong enough to seal properly.
  • The fluid port is wide open and not moving fluid through any intricate valves or channels that could trap liquid and lead to funk.
  • When you remove the lid, the blue valve slides further back and lets the seal fully escape the port, at which point it will automatically flip up for easy cleaning. When the lid’s on the mug, the lever can’t travel far enough for this to happen, so it won’t accidentally pop up and cause a spill.
  • A soft impact cap was placed on the base so it won’t dent as easy and possibly bust the vacuum if you drop it.
  • The 12oz will fit under a Keurig and is good for Euros that like petite coffees. There’s a 16oz for the rest of us.

2014-Camelbak-Forge-stainless-vacuum-insulated-coffee-mug

Retail is $29 (12oz) and $30 (16oz), available in March or April.

2014-Camelbak-water-bottle-mud-cap01

The Mud Cap is a little item they’ve offered for a while but we hadn’t seen. If you routinely ride in foul conditions or on trails shared by horses and dogs, this little guy will keep the crud/crap from spraying into your drink hole. They’ll eventually have a version for the new Podium bottle Jet Valves, too.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

12 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Speedy
Speedy
10 years ago

So what about those of us that drink a 20oz coffee? Where is my venti???

Andy
10 years ago

Are those coffee cups bottle cage compatible?

reverend dick
10 years ago

I have a “drink hole”.

Robo
Robo
10 years ago

Love their bottle tech, hate the shape of their bottles. I always have to spin them to where those damn ridges aren’t so that it’ll lock in the cage.

Matt Holland
Matt Holland
10 years ago

I used to be a big fan of camelbak, had a couple packs in the past, but find now they’re a bit too fashionable, unnecessary features, and not very streamline, ie lots of stuff going on. I’ve moved to osprey now, on my second pack, a new style raptor 10l, and it beats the CB packs hands down, really neat features and a much less fussy pack to use and ride with. I spent alot of time looking at a variety of packs and honestly think if you’re after a pack, the raptor the best on the market

Quickie
Quickie
10 years ago

I was just thinking to myself, “What pack would Matt Holland use?”

Still Laughing
Still Laughing
10 years ago

^ Best Comment Ever

Adam
Adam
10 years ago

Why do coffee cups like this have a carabiner clip? Who in the world is clipping their coffee to their belt loop, or dangling it off a bag loop so it can swing around and whack you in the elbow? Or is it really just a renamed guard to keep from accidentally pressing the blue lever?
My dream, someone designs an airtight mug (not a thermos) that can’t leak when upside down in my bag, doesn’t have a handle or ‘biner loop that pokes me in the back and/or makes the mug not fit in a bottle cage.

Matt Holland
Matt Holland
10 years ago

Lucky I dropped by then!

RUSTYDOGG
RUSTYDOGG
10 years ago

I wonder if the squeaking sound from the Jet Valve has been solved? Anyone who uses one of these off the bike knows what I am talking about. Leave it sit in quiet (office environ.) and the valve will start to whistle/squeak. Annoying. I guess its a pressure difference when cool liquid is warming…?

frank
frank
10 years ago

RUSTYDOG: +1!

Dan N.
Dan N.
10 years ago

RUSTYDOG: +1! Drives everyone in the room nuts!

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.