Home > Bike Types > Mountain Bike

IB13: Pave No Longer Just for Pros, Speedplay Releases Classics Pedal, Brass Knuckle Flats

17 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

speedplay pave pedals brass knuckles20130916_0010

For a few years now, Speedplay sponsored pros have been seen with custom pedals for the classics like Paris Roubaix. The pedals feature a metal body with most of Speedplays distinctive Zero shape cut away to form a plus sign shaped pedal. The design, now called the Pave is designed to allow easier clip in should you encounter mud or dirt during your ride.

According to Speedplay the Paves are finally going to be offered to the public with details after the break.

The Pave body is completely machined out of steel to improve durability especially in gross conditions and is offered in both steel and titanium axles. The price reflects the amount of machining time needed to make each pedal with Stainless axle versions listed at $400 and titanium axles at $600. The pedals use the same grease fittings for lubrication as the Zeros to keep the needle bearing assembly rolling free. Each pedal also uses two cartridge bearings as well. Both versions should be available January, 1.

speedplay pave pedals brass knuckles20130916_0012

The Brass knuckle is also new for 2014 and features a thinner, lighter build than their Drilliums. While the pedals feature a 12mm axle the pedals are still pretty thin with a 13.5mm thick body at the center.

speedplay pave pedals brass knuckles20130916_0011

Offered in either a chromoly or Ti spindle, the Brass Knuckles use one needle bearing and two cartridge bearings per pedal with double seals. Like Speedplay’s other pedals the BNs are serviceable with a grease injection port. Traction is provided through custom torx shapes studs that thread into the CNC machined body.

speedplay pave pedals brass knuckles20130916_0013

Also available January 1, the Brass Knuckles will retail for $180 for the chromo and $400 for the Ti.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

17 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
dl
dl
10 years ago

Right, but what about the Syzr?

CXisfun
CXisfun
10 years ago

dl: Syzr?! That’s HILARIOUS! What is this, 2007? Don’t hold your breath….

MG
MG
10 years ago

Curious to see what the weight shed is… And also what it’d feel like to take a brass knuckle to the shin.

Xris
Xris
10 years ago

$400 and $600 for a pair? I wonder if I get a bag of coke to go with that as well.

rico
rico
10 years ago

Woah those Pave pedals look odd.

Regarding the brass knuckle one, it looks heavy. The two most insane flat pedals I’ve had were Hutch Bear traps and Tewnty6 pre-runners. I had good luck with the bear traps somehow but shredded my shin with teh prerunner which had these pins that were like needles. They held like glue to a sole like vans waffle, but if you get bounced out of them it’s deadly.

Alex
Alex
10 years ago

How about re-releasing the Magnum pedal?

Andy
Andy
10 years ago

@dl I assume there’s something they can’t make work with the SYZR, hence continuing delays in getting them to the shops.

Were there any in display on their stand, Bikerumor?

Velociraptor
Velociraptor
10 years ago

Those Paves looks sharp… Sharp as in they could cut someone.

Speedy
Speedy
10 years ago

I feel like a vampire died reading this post.

Chris
Chris
10 years ago

In the 15 years I’ve ridden road clipless I have not once taken a pedal in the shin or any other sort of incident. I usually clip in at the beginning of the ride and then clip only when I complete my ride. I wouldn’t worry about the shape of these, guys.

Seraph
Seraph
10 years ago

$400 for a pedal?? Bah…bah! What the hell are they thinking? That pedal isn’t nearly nice enough to justify that price! For less than that I can get a sweet set of Twenty6 Predators in a custom color combo, and they will be hand-made in the USA!

Psi Squared
Psi Squared
10 years ago

Those Pave pedals need a thru axle.

Erich
Erich
10 years ago

People still ride Speedplay?

stephen draper
stephen draper
10 years ago

Speedplay; with a whole lotta liberty from the old original coombe pedal. [if anyone remembers this piece of beautiful engineering from the early 90’s]. With a CEO as an avid pedal collector, it is no wonder there is some historical ruboff on this ‘new’ looking desgin.

real velo
real velo
10 years ago

Looks rather Nazi like
My existing ones take a lot of maintenance but I suppose speedplay like 11 speed stuff helps stop over training

655321
655321
10 years ago

The coombe website is now back online.

http://www.coombe.com/

TGeneC
TGeneC
9 years ago

OK, let’s review:”The price reflects the amount of machining time needed to make each pedal with Stainless axle versions.” What a load of horse manure. The time it takes to load a billet into a CNC and have it spit one of these things out is minimal. Let’s keep it real and state it this way: “The price reflects the ignorance and gullibility of the typical consumer who believes that since the Pro’s ride it, purchasing them at a grossly inflated price will make them think that somehow the pedals will make them better, faster and more admired by the Tuesday Night World Championship shop riders…”

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.