Home > Feature Stories

Fox Racing Shox Museum Grand Opening: Defining Moments,Then & Now

16 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Fox Museum Launch041713_0372

Sea Otter is full of mini product launches within its Laguna Seca confines, but it is also host to many events that happen outside the famous race track. Just a short trip from the venue lies a number of company headquarters to some of the biggest industry players, including Fox in Scotts Valley, CA. Fox took advantage of Monterey’s invasion by the bike industry to open their new museum, chronicling the suspension company’s nearly 40 year history. We were fortunate enough to get an invite, and took advantage to give you a peek into the museum.

Get a Fox history play by play, including the first ever Fox bicycle shocks after the break!

Bob's Speech Fox Museum Launch041713_0417

The evening started off with an emotional speech from the man who started it all, Bob Fox. Like so many success stories, Bob started with an idea but it was an idea that most people thought ridiculous. “Air shocks on a moto? You have to be kidding me.”

Fox Museum Launch041713_0382 Fox Museum Launch041713_0379

When motocross began to experiment with long travel in the Early 70’s, the advantages to the increased wheel travel were obvious but the design took its toll on shocks. Shocks would overheat, sometimes failing completely. As an amateur motocross racer at the time, Bob used his mechanical engineering background to develop a solution – an air pressurized shock absorber.

Original Fox Drawings
Before there were computers, there was pen and paper. Many of Bob’s original handwritten testing documents were on display.

Today we all know the advantages of being able to change spring rates with a stroke of a shock pump, but back then it was unheard of. Bob took his ideas from pencil to working shocks, and with the help of professional riders like Brad Lackey (who were present at the speech, and Bob thanked personally), Fox Airshox were born.

Fox Museum Launch041713_0381

In 1976, Kent Howerton and his mechanic Eric Crippa invited Bob to join them for a test session in Florida, Bob packed his suitcase to the brim with Airshox and was on his way. After a long day of testing, Kent announced that he liked the shocks and was going to use them in his next race.

On the flight home, I remember being happy and excited that Kent had chosen my design, but I had no idea of how crucially important that day in Florida would be for my future.” – Bob Fox

Kent went on to win his first race, and continued riding the Fox shocks to an AMA 500cc National Motocross Championship aboard his Husqvarna.

Fox Museum Launch041713_0384

Fox Museum Launch041713_0383

Just a year later, Marty Smith rode his Fox Airshox to the 1977 AMA 500cc National Motocross Championship on his Factory Honda, making it back-to-back victories. According to Fox, those two victories are what truly launched his suspension career.

Fox Museum Launch041713_03871

Due to an earlier agreement with his brother Geoff which allowed Bob the right to buy out the Airshox division from Moto-X Fox, Bob purchased the division and established his own separate company. This is where Fox Shox and Fox Moto-X split. Fox Factory, Inc. along with the iconic Fox logo with the Fox tail sweeping out from the center of the ‘O’ was born.

Fox Museum Launch041713_03881

1979 saw the introduction of the first Fox Forx, still a coil spring fork, but one with massive 44mm stanchion tubes. At the time the standard diameter was 38mm, with a few riders on 41mm forks. Due to complicated installation and high manufacturing costs, the Forx project set the standard for future fork production but lost money and ultimately were discontinued. Only a few hundred sets were produced which of course are in high demand now for vintage moto buffs.

Fox Museum Launch041713_0389

Not letting that setback slow him down, Bob continued to grow Fox Shox entering into the world of the Indy 500, outfitting 14 of the 33 cars in the 1981 running. Entering into the superbike market, it wasn’t long until Eddie Lawson took the 1982 AMA Superbike Championship on his Team Muzzy Kawasaki with twin Fox Piggyback shocks. The very next year motorcycles made the evolution to mono-shock frame designs which didn’t stop Wayne Rainey from winning the Championship on his Team Kawasaki equipped with a Fox Twin Clicker.

Fox Museum Launch041713_0391

Seemingly nothing could stop Fox now, as they expanded into the snowmobile and 4-wheel offroad market, leading to some of the most gargantuan shock absorbers Fox makes.

Fox Museum Launch041713_0396

If you’re wondering when bicycles came along, the year was 1991. The Alps 1 was the first bicycle prototype from Fox, even though it was never sold it started another revolution.

Fox Museum Launch041713_0397

In 1992 the Alps 2 was released as the first production Fox Bicycle product. Most of us probably think of forks first when we think of the early days of Fox Shox, though that may have something to do with the infancy of full suspension at the time. In 1993 Cannondale spec’ed Fox Shox on their first line of full suspension mountain bikes.

Fox Museum Launch041713_0395

The Alps series was a simple pressurized air shock without any external adjustments and a steel shaft. In 1994 the Alps 4R gained rebound adjustment and an alloy shaft, with an improved bearing and valving design in 1996 with the Alps 5R.

Fox Museum Launch041713_0399 Fox Museum Launch041713_0398

It wasn’t until the year 2001 that Fox entered the world of mountain bike forks based on Fox’s wanting to be best in class before entering any new product to the market. This early prototype of the Fox Forx on the left was created with sterolithography, an early form of 3D printing.

Fox Museum Launch041713_0400

Fox Museum Launch041713_0401

And before you know it, an entire family of Fox bicycle product takes shape. It was very impressive to see how far they (and all suspension for that matter) have come in such a short time.

Fox Museum Launch041713_0393

Fox Museum Launch041713_0394 Fox Museum Launch041713_0390

Of course much of the new technology has been thanks to Fox’s RAD department, which is a real thing – FoX Racing Applications Development. Testing doesn’t always result in production as in the case of the inverted Fox downhill fork, but it is the feedback and data from the world’s best pros pushing things to the limit that allows for improvement.

Fox Museum Launch041713_0407 Fox Museum Launch041713_0406

For instance, in 2008 Fox tested a Nickel coating on their rear shocks with Gee and Rachel Atherton and while the coating proved have lower friction than standard anodized coatings, it was too soft for production. But it was this testing that led to Fox introducing Kashima coating in 2011. Similar development led to the Fox DOSS seat post.

Fox Museum Launch041713_0412

Aaron Gwin’s World Cup winning Session 9.9 was on display with the RAD fork which gave way to the new Fox 40 Air DH fork.

Fox Museum Launch041713_0413 IMG_1357

In addition to dirtbikes, bicycles, snowmobiles, race cars, motorcycles, side by sides, and just about anything else with wheels, Fox Shox have been finding their way into unique prosthesis like Monster Mike’s leg. After an accident in a Snocross race left Mike Schultz’s knee “exploded”, rather than succumb to a life of “Wii Golf”, he has continued to pursue his favorite activities. Mike’s new leg is not only a marvel of engineering, but it is even more impressive due to the fact that he designed and machined it himself – without any formal training.

Fox Museum Launch041713_0411

Fox Museum Launch041713_0410

The design key to Mike’s Moto Knee is that unlike typical prosthesis, it assists extension and resists flexion. That, along with 135 degrees of flexion allows for users to do many things they wouldn’t be able to otherwise, like ride motocross or downhill mountain bikes.

Fox Museum Launch041713_0420

In a way Mike and Bob are not that different. Each saw a way to do something better, and with the resources at hand were determined to get it right. What all started as simply the want to build a better moto-X shock for a hobby turned into a career that has revolutionized suspension as we know it.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

16 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
motomag
motomag
10 years ago

This has to be one of the coolest things I have seen on this site. The KH Husky is sick.

Mark Davidson
10 years ago

Thank you for writing this fantastic article. I was at the FOX museum opening but didn’t take too many pictures. There was so much to see at the museum and this article does a great job of summarizing the history of FOX and their entry into the bicycle suspension market.

Just a few corrections (all in the second sentence): “…including Fox Racing Shox in Watsonville, CA. Fox took advantage of Monteray’s”. FOX is now based in Scotts Valley, CA – which is a suburb of Santa Cruz. The city at the other end of the bay is named Monterey (with an ‘e’) and generally FOX has dropped the ‘Racing Shox’ part of their name and use an upper case FOX.

I don’t work for the company but I’m a big fan of their people and products.

Thanks again for a wonderful post.

wheelz
wheelz
10 years ago

Nice article. A good reminder how relatively young the mountain bike industry is and how far it’s come in a short amount of time. Make me wonder what mountain bike suspension will look like in 10 or 20 years.

satisFACTORYrider
satisFACTORYrider
10 years ago

cool post. love old skool moto. moto knee is sick.

geephlow
geephlow
10 years ago

thanks Zach — awesome article! really inspiring to see bob fox’s dream turn into one of the most important innovation centers for our sport (and a bunch of others too).

Steve M
Steve M
10 years ago

C’mon now- those scissors are kind of half assed. Looks like gold anodize to simulate Kashima?

ds
ds
10 years ago

Excellent article, thank you !

efukt
efukt
10 years ago

Nice article. You did a great job.

MaLóL
MaLóL
10 years ago

Excellent article, thank you !

Erik
Erik
10 years ago

*peek

Max
Max
10 years ago

Nice article and nice museum

http://brimages.bikeboardmedia.netdna-cdn.com/wp-content/uploads/2013/05/Fox-Museum-Launch041713_0399.jpg

The lower legs have a Sprue system, which nobody prints on a 3D printer (this will need only time & money for nothing) and a typical edge of the joints of the mold.

Chicken Boo
Chicken Boo
10 years ago

That prosthetic looks cooler than my actual leg

MissedThePoint
MissedThePoint
10 years ago

What kind of patented tech is Bob Fox sitting on, I wonder.

Ham-planet
Ham-planet
10 years ago

So is Geoff’s ‘Fox’ the one that does the clothing? The two companies are no longer related, right?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.