Home > Bike Types > Road Bike

Unboxed: Shimano Di2 9070 Actual Weights

25 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Shimano Di2 9700 rear derailleur actual weight

So far, we’ve posted actual weights for the complete 2013 Shimano Dura-Ace 9000 mechanical group and, thanks to our friends at Race Pace Bicycles, the weights of the new Di2 internal seatpost battery.

But, that bike came fully built, so we didn’t have individual component weights for the Di2 bits. Now we do, courtesy of Emiliano at Fair Wheel Bikes. They’re saying everything’s coming in under Shimano’s official claimed weights, too!

The Di2 9070 rear derailleur comes in at 213.4g, versus 160g for mechanical. Click through for the rest…

Shimano Di2 9700 front derailleur actual weight

Front derailleur is 106.5g, versus 60g for mech. So far, we’re +100g.

Shimano Di2 9700 shifter levers actual weight

The Di2 shifter/levers come in at just 230g for the pair. That’s 135g lighter than the mechanical version’s 365g, more than making up for the derailleurs. Of course, you’ll still have the battery, but the wires are lighter than the cables and housing.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

25 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Matt
Matt
11 years ago

Electric shifting is so sweet. I can never go back.

Face Palm
Face Palm
11 years ago

Dura Ace 11-speed electric is Di2 9070, not 9700.

Tommythetech
Tommythetech
11 years ago

The Dura-Ace mechanical group is called 9000
The Dura-Ace electronic group is called 9070

no 9700

cymacyma
11 years ago

Oh, me too here! not 9700 yet!! It’s 2013 /w 9000 series T-T

Di2Rider
Di2Rider
11 years ago

Looks a tad lighter than my first gen Di2.
I’m hoping to find anyone that has been able to hack first gen DA Di2 to shift 11.

Brandon
Brandon
11 years ago

Is the lever shape the same as 7970? I was hoping for the 9000 shape….

greg
greg
11 years ago

brandon,
hoods are very similar to the shape of the 7970. that said, the 7970 was the model for what the 9000 mechanical sti became. 9070 hood rubber is dual compound like the 9000, but the firmer rubber part is still a lot more pliable than the 9000 version.
it is very, very nice. i have experience with 7970 and 9000, as well as 9070…

gopherlaugh
gopherlaugh
11 years ago

Okay what does the battery weight? Is it the one in the seatpost?

CCR
CCR
11 years ago

Shimano… Making easy things easier since 2008.

jason
jason
11 years ago

There’s at least a grams worth of stickers on that front mech.

Hannes
Hannes
11 years ago

Hi All, Hi Editor’s,
can you please ask your sources if the 9070 is able to be programmed for 10speed shifting. I have heard, especially from US colleagues, that this will be possible? Thanks+Br, Hannes

Why bird
Why bird
11 years ago

I still don’t see the point of electronic shifting. it weighs more, costs significantly more and doesn’t seem to offer any advantage over conventional shifters. Is it just for posers and triathletes?
Won’t someone tell me what I’m missing

Brandon
Brandon
11 years ago

Greg: I was asking about the lever.

zombieweekly
zombieweekly
11 years ago

Hannes,from what I have gathered its possible to shift the Di2 Ultegra using 9070 shifter without any programming. The same was true with 9070 shifters working on Di2Ultegra without any firmware updates. But this might all change if and when Shimano chooses to release a firmware that will prohibit from any of these to keep on working. Tri/TT stuff seems to work too, its just buttons sending messages.

They love their integration, as part of Shimano Totally Integrating yor budget with circles and triangles on compatability list.

zombieweekly
zombieweekly
11 years ago

Brandon, excuse me from budging in here but the levers are shaped bit differently. The brake levers are more ergonomically shaped and the shifting buttons themselves are bit larger compared to 7970 series to save riders from mis-shifting. Hope that helps.

mateo
mateo
11 years ago

@ Hannes – wouldn’t that just be 6770? The rear der determines number of speeds, so you could use 9070 shifters with 6770 everything else. Not sure how much mixing of 10/11 speed drivetrain otherwise.

Shengyuan
Shengyuan
11 years ago

Hi anyone has any idea about the programming devices? i.e. SM-PCE1 and SM-BCR2. The two are both marked as a programming device for E-tube project. Then what’s the difference between them? BCR2 seems to have more functions than PCE1 which cost significantly more. Can BCR2 act as a charger for external battery as well? Though I saw no point charing an external battery via a junction box, I am still interested in knowing that.

Matt
Matt
11 years ago

@Bird – from my experience (first generation dura ace Di2) the shifting is perfect everytime – everytime (so perfect that I sometimes need to look down to see if it actually shifted), there is automatic trim on the front derailluer and best of all, I can shift perfectly standing up, under full load and it is still perfect. Not to mention, the mechanical sound it makes is sweet and freaks other rides out when they hear it for the first time. Is that enough reason to switch from say the very nice shifting SRAM Red – maybe not, but price points are coming down for it (Ultrega) and I think you will see it signicantly more in the next couple of years.

I am really hoping they bring this out for mountain bike soon.

Matt
Matt
11 years ago

Oh, and to me, weight doesn’t mattter on a road bike. Seriously, who cares if your road bike is 14, or 15 or even 16 pounds.

bin judgin
bin judgin
11 years ago

Also you can put this on a pile of junk Madone 7 series and it will actually shift the front chainrings. About the only thing that will if your frame doesn’t crack in 5 weeks before you get it into the big ring. Welcome to garbage frame productions!

mateo
mateo
11 years ago

@Shengyuan – BCR2 is just the battery charger for the internal battery. For firmware updates and programming changes you need PCE1.

Brandon
Brandon
11 years ago

@matteo: can you confirm that? That’s an answer I’ve been looking for: is the 11 speed program in the derailleur or shifter? If I pair 6770 shifters with 9070 rear derailleur do I get 11 speed for sure?

greg
greg
11 years ago

for firmware updates, and customizing the shift actions, etc., you can use the bcr2 or the pce1. the only thing the bcr2 does not do that the pce1 does is diagnosis when you have something malfunctioning. it will test stuff out and give you a step by step on narrowing it all down. i consider myself very up to date on the latest goings-on with this stuff, but i didnt learn what i just mentioned until yesterday. it is not clear in shimano literature, except in the E-Tube Project manual. my own Shimano outside rep didnt know either.
rear derailleur determines the number of cogs. i havent tried 9070 shifters w 6770 der yet, the other way around is established. firmware updates likely WILL be needed, as most 6770 stuff will have old firmware on it. firmware has to be the same on all electronic parts on the bike.
Brandon- oops. sorry.

gt350
gt350
11 years ago

having ridden di2, its awesome having said that its not for me , I don’t want to worry if I have a charge to ride- having said that , I find very few people who have tested it to argue the shifting is a leap for the better.

Brandon
Brandon
11 years ago

@gt350 – my current 7970 and 6770 setups were last charged in July. I don’t worry if I have a charge to ride, either.

Having said that, we clearly are talking to very different people. I don’t know of anyone who has put a reasonable amount of time on Di2 that wasn’t completely sold on it.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.