Home > Bike Types > Commuter

Taiwan Bike Tour: Ming Cycle – Private Label Production, Assembly & Strida Folding Bikes

7 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

Ming Cycles factory tour - Look road bike assembly

As part of our tour of Taiwan’s bicycle industry, we swung by Ming Cycle, one of the world’s largest OEM bike manufacturers.

But they’re far more than just an OE manufacturer. For some brands, they’re simply an assembly middleman. Or a painter. And they own Strida, the unique folding bicycle brand started in the UK. Ming started making them in 2002 and bought the brand in 2007.

We arrived a bit later than expected thanks to some very interesting routes, U-turns, stops for directions and other extensions to our bus trip. As such, the factory side of the building was closed for the day, but we did get to see some of the assembly line (above) and Strida build room. Then, we did laps on them around the conference room…

They have two assembly lines that can put together 300,000 bikes per year. They assemble Look’s bikes, though they don’t make them. Alloy and steel bikes are assembled on conveyer belt lines that resemble what we saw at Giant Bicycles’ World HQ. Carbon bikes, however, are assembled in one-person stations. Above, the new Look 675 is inspected after final assembly, wiped down, then carefully wrapped and packaged.

Like Giant’s plant, they have automated wheel building lines for the more mass produced items. Once the bikes are run through the assembly line, the first one for each model is pulled and quality checked for brake and shifting function, spoke tension and fit and finish. Then, bikes are spot checked by a line manager. While a good shop will still double check everything and fine tune it, it never hurts the brand when their bikes come well assembled.

Ming’s Taichung plant also does paint, with their own automated paint booths for high volume models. For higher end bikes, they have teams that hand mask and paint up to 20 frames per day.

STRIDA FOLDING BIKES

Ming Cycle factory tour and strida folding bike manufacturing facility

The Strida is instantly recognizable. It’s triangle shape belies it’s rather standard fit. You sit pretty upright, and reach and seat height are somewhat adjustable. It folds fairly quickly once you get the hang of it, too, and wheels along rather than needing to be carried.

Riding one is awkward at first. The tiny wheels and slack head angle (the entire front tube is the steerer) make for some twitchy handling, but before long we were whipping around the conference room, dodging our hosts, each other and show bikes hanging on the walls. Good times.

Ming Cycle factory tour and strida folding bike manufacturing facility

They make 65 a day with 12 people working on them. The frames are made in their mainlindChina plant, then assembled in here in Taichung.

Ming Cycle factory tour and strida folding bike manufacturing facility

Ming Cycle factory tour and strida folding bike manufacturing facility

The latest models can be equipped with some pretty trick components. On the high end, you get a belt drive hooked up to a Sturmey Archer kick speed 3-speed bottom bracket. Pedal backward a step and it shifts into a harder gear. Do it again for another gear up. A third time returns it to the easiest gear.

Ming Cycle factory tour and strida folding bike manufacturing facility

Clamshell pedals open flat against the crank for a narrower package when folded.

Ming Cycle factory tour and strida folding bike manufacturing facility

Disc brake and belt cog are all on the right hand side. The front axle flops around to connect with the rear when folded.

OEM MANUFACTURING

It definitely would have been nice to see the manufacturing side of the facility, but at least we had a good look at the fruits of their labor. All of the bikes shown here are really proof of concept items to show potential OE customers what they can do. Look around and you’ll likely see familiar shapes and design cues.

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

7 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
CW
CW
11 years ago

would you look at that!

Tes
Tes
11 years ago

Feel that 7-10 spare when you stack triangle bike into a curb.

Tom
Tom
11 years ago

Wait a second, did you say a factory in China closed for a day? *gasp*

Ventruck
Ventruck
11 years ago

Got a Strida in the house because it was on discount. Single speed belt drive and discs. Twitchy ride indeed, mostly due to the HT angle. To be honest I don’t get what’s so practical about it over other folding bikes. Faster folding time imo isn’t all that significant. I just enjoy it for being different.

It’d probably serve for some random, indoor sport of some sort. :/

Sean
Sean
11 years ago

If you were travelling just a few hundred metres and constantly hopping on and off the tube then you would consider the fold time,

Jeff
Jeff
11 years ago

So how does it work… They make the frames in China and then assemble them in Taiwan so they can slap a “Made in Taiwan” sticker on the bike?

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.